linux/arch/arm/boot/dts/rk3066a-bqcurie2.dts
Heiko Stuebner 9586609619 ARM: rockchip: add dts for bqcurie2 tablet
The BQ Curie2 is a tablet based on the rk3066a SoC.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-10-14 23:03:46 +02:00

110 lines
2.3 KiB
Plaintext

/*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include "rk3066a.dtsi"
/ {
model = "bq Curie 2";
memory {
reg = <0x60000000 0x40000000>;
};
soc {
uart0: serial@10124000 {
status = "okay";
};
uart1: serial@10126000 {
status = "okay";
};
uart2: serial@20064000 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
status = "okay";
};
uart3: serial@20068000 {
status = "okay";
};
vcc_sd0: fixed-regulator {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
};
dwmmc@10214000 { /* sdmmc */
num-slots = <1>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
};
dwmmc@10218000 { /* wifi */
num-slots = <1>;
status = "okay";
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
button@0 {
gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
gpio-key,wakeup = <1>;
debounce-interval = <100>;
};
button@1 {
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <104>;
label = "GPIO Key Vol-";
linux,input-type = <1>;
gpio-key,wakeup = <0>;
debounce-interval = <100>;
};
/* VOL+ comes somehow thru the ADC */
};
};
};