linux/arch/arm/boot/dts/kirkwood-dns320.dts
Andrew Lunn 3a31f2d7fc ARM: DT: Kirkwood: Use symbolic names from gpio.h
Use GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW instead of 0 and 1.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-08 01:00:54 +00:00

60 lines
1.2 KiB
Plaintext

/dts-v1/;
#include "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-320 NAS (Rev A1)";
compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
&pmx_led_red_left_hdd &pmx_led_red_right_hdd
&pmx_led_white_usb>;
pinctrl-names = "default";
blue-power {
label = "dns320:blue:power";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
blue-usb {
label = "dns320:blue:usb";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
orange-l_hdd {
label = "dns320:orange:l_hdd";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
orange-r_hdd {
label = "dns320:orange:r_hdd";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
orange-usb {
label = "dns320:orange:usb";
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
};
};
ocp@f1000000 {
serial@12000 {
status = "okay";
};
serial@12100 {
pinctrl-0 = <&pmx_uart1>;
pinctrl-names = "default";
status = "okay";
};
};
};