linux/drivers/mfd/omap-usb-tll.c
Yangtao Li 41b2e61ae6 mfd: omap-usb-tll: Convert to devm_platform_ioremap_resource()
Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-2-frank.li@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
2023-08-18 21:48:00 +01:00

465 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
*
* Copyright (C) 2012-2013 Texas Instruments Incorporated - https://www.ti.com
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
* Author: Roger Quadros <rogerq@ti.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/usb-omap.h>
#include <linux/of.h>
#include "omap-usb.h"
#define USBTLL_DRIVER_NAME "usbhs_tll"
/* TLL Register Set */
#define OMAP_USBTLL_REVISION (0x00)
#define OMAP_USBTLL_SYSCONFIG (0x10)
#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
#define OMAP_USBTLL_SYSSTATUS (0x14)
#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
#define OMAP_USBTLL_IRQSTATUS (0x18)
#define OMAP_USBTLL_IRQENABLE (0x1C)
#define OMAP_TLL_SHARED_CONF (0x30)
#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24
#define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16)
#define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15)
#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
#define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1)
#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1)
#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0
#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1
#define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2
#define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5
#define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6
#define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7
#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA
#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB
#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
#define OMAP_REV2_TLL_CHANNEL_COUNT 2
#define OMAP_TLL_CHANNEL_COUNT 3
#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0)
#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1)
#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2)
/* Values of USBTLL_REVISION - Note: these are not given in the TRM */
#define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */
#define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */
#define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */
#define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
/* only PHY and UNUSED modes don't need TLL */
#define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\
(x) != OMAP_EHCI_PORT_MODE_PHY)
struct usbtll_omap {
void __iomem *base;
int nch; /* num. of channels */
struct clk *ch_clk[]; /* must be the last member */
};
/*-------------------------------------------------------------------------*/
static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
static struct device *tll_dev;
static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */
/*-------------------------------------------------------------------------*/
static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
{
writel_relaxed(val, base + reg);
}
static inline u32 usbtll_read(void __iomem *base, u32 reg)
{
return readl_relaxed(base + reg);
}
static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val)
{
writeb_relaxed(val, base + reg);
}
/*-------------------------------------------------------------------------*/
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
switch (pmode) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
return true;
default:
return false;
}
}
/*
* convert the port-mode enum to a value we can use in the FSLSMODE
* field of USBTLL_CHANNEL_CONF
*/
static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
{
switch (mode) {
case OMAP_USBHS_PORT_MODE_UNUSED:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
return OMAP_TLL_FSLSMODE_3PIN_PHY;
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
return OMAP_TLL_FSLSMODE_4PIN_PHY;
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
return OMAP_TLL_FSLSMODE_3PIN_TLL;
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
return OMAP_TLL_FSLSMODE_4PIN_TLL;
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
default:
pr_warn("Invalid port mode, using default\n");
return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
}
}
/**
* usbtll_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller.
*
* @pdev: Pointer to this device's platform device structure
*/
static int usbtll_omap_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbtll_omap *tll;
void __iomem *base;
int i, nch, ver;
dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
ver = usbtll_read(base, OMAP_USBTLL_REVISION);
switch (ver) {
case OMAP_USBTLL_REV1:
case OMAP_USBTLL_REV4:
nch = OMAP_TLL_CHANNEL_COUNT;
break;
case OMAP_USBTLL_REV2:
case OMAP_USBTLL_REV3:
nch = OMAP_REV2_TLL_CHANNEL_COUNT;
break;
default:
nch = OMAP_TLL_CHANNEL_COUNT;
dev_dbg(dev, "rev 0x%x not recognized, assuming %d channels\n",
ver, nch);
break;
}
tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
GFP_KERNEL);
if (!tll) {
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
return -ENOMEM;
}
tll->base = base;
tll->nch = nch;
platform_set_drvdata(pdev, tll);
for (i = 0; i < nch; i++) {
char clkname[] = "usb_tll_hs_usb_chx_clk";
snprintf(clkname, sizeof(clkname),
"usb_tll_hs_usb_ch%d_clk", i);
tll->ch_clk[i] = clk_get(dev, clkname);
if (IS_ERR(tll->ch_clk[i]))
dev_dbg(dev, "can't get clock : %s\n", clkname);
else
clk_prepare(tll->ch_clk[i]);
}
pm_runtime_put_sync(dev);
/* only after this can omap_tll_enable/disable work */
spin_lock(&tll_lock);
tll_dev = dev;
spin_unlock(&tll_lock);
return 0;
}
/**
* usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
* @pdev: USB Host Controller being removed
*
* Reverses the effect of usbtll_omap_probe().
*/
static int usbtll_omap_remove(struct platform_device *pdev)
{
struct usbtll_omap *tll = platform_get_drvdata(pdev);
int i;
spin_lock(&tll_lock);
tll_dev = NULL;
spin_unlock(&tll_lock);
for (i = 0; i < tll->nch; i++) {
if (!IS_ERR(tll->ch_clk[i])) {
clk_unprepare(tll->ch_clk[i]);
clk_put(tll->ch_clk[i]);
}
}
pm_runtime_disable(&pdev->dev);
return 0;
}
static const struct of_device_id usbtll_omap_dt_ids[] = {
{ .compatible = "ti,usbhs-tll" },
{ }
};
MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
static struct platform_driver usbtll_omap_driver = {
.driver = {
.name = usbtll_driver_name,
.of_match_table = usbtll_omap_dt_ids,
},
.probe = usbtll_omap_probe,
.remove = usbtll_omap_remove,
};
int omap_tll_init(struct usbhs_omap_platform_data *pdata)
{
int i;
bool needs_tll;
unsigned reg;
struct usbtll_omap *tll;
if (!tll_dev)
return -ENODEV;
pm_runtime_get_sync(tll_dev);
spin_lock(&tll_lock);
tll = dev_get_drvdata(tll_dev);
needs_tll = false;
for (i = 0; i < tll->nch; i++)
needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
if (needs_tll) {
void __iomem *base = tll->base;
/* Program Common TLL register */
reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
| OMAP_TLL_SHARED_CONF_USB_DIVRATION);
reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
/* Enable channels now */
for (i = 0; i < tll->nch; i++) {
reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i));
if (is_ohci_port(pdata->port_mode[i])) {
reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
} else if (pdata->port_mode[i] ==
OMAP_EHCI_PORT_MODE_TLL) {
/*
* Disable UTMI AutoIdle, BitStuffing
* and use SDR Mode. Enable ULPI AutoIdle.
*/
reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE;
} else if (pdata->port_mode[i] ==
OMAP_EHCI_PORT_MODE_HSIC) {
/*
* HSIC Mode requires UTMI port configurations
*/
reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
| OMAP_TLL_CHANNEL_CONF_CHRGVBUS
| OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
} else {
continue;
}
reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg);
usbtll_writeb(base,
OMAP_TLL_ULPI_SCRATCH_REGISTER(i),
0xbe);
}
}
spin_unlock(&tll_lock);
pm_runtime_put_sync(tll_dev);
return 0;
}
EXPORT_SYMBOL_GPL(omap_tll_init);
int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
{
int i;
struct usbtll_omap *tll;
if (!tll_dev)
return -ENODEV;
pm_runtime_get_sync(tll_dev);
spin_lock(&tll_lock);
tll = dev_get_drvdata(tll_dev);
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
int r;
if (IS_ERR(tll->ch_clk[i]))
continue;
r = clk_enable(tll->ch_clk[i]);
if (r) {
dev_err(tll_dev,
"Error enabling ch %d clock: %d\n", i, r);
}
}
}
spin_unlock(&tll_lock);
return 0;
}
EXPORT_SYMBOL_GPL(omap_tll_enable);
int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
{
int i;
struct usbtll_omap *tll;
if (!tll_dev)
return -ENODEV;
spin_lock(&tll_lock);
tll = dev_get_drvdata(tll_dev);
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
if (!IS_ERR(tll->ch_clk[i]))
clk_disable(tll->ch_clk[i]);
}
}
spin_unlock(&tll_lock);
pm_runtime_put_sync(tll_dev);
return 0;
}
EXPORT_SYMBOL_GPL(omap_tll_disable);
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
static int __init omap_usbtll_drvinit(void)
{
return platform_driver_register(&usbtll_omap_driver);
}
/*
* init before usbhs core driver;
* The usbtll driver should be initialized before
* the usbhs core driver probe function is called.
*/
fs_initcall(omap_usbtll_drvinit);
static void __exit omap_usbtll_drvexit(void)
{
platform_driver_unregister(&usbtll_omap_driver);
}
module_exit(omap_usbtll_drvexit);