linux/arch/x86/pci/init.c
Robert Hancock 7752d5cfe3 x86: validate against acpi motherboard resources
This path adds validation of the MMCONFIG table against the ACPI reserved
motherboard resources.  If the MMCONFIG table is found to be reserved in
ACPI, we don't bother checking the E820 table.  The PCI Express firmware
spec apparently tells BIOS developers that reservation in ACPI is required
and E820 reservation is optional, so checking against ACPI first makes
sense.  Many BIOSes don't reserve the MMCONFIG region in E820 even though
it is perfectly functional, the existing check needlessly disables MMCONFIG
in these cases.

In order to do this, MMCONFIG setup has been split into two phases.  If PCI
configuration type 1 is not available then MMCONFIG is enabled early as
before.  Otherwise, it is enabled later after the ACPI interpreter is
enabled, since we need to be able to execute control methods in order to
check the ACPI reserved resources.  Presently this is just triggered off
the end of ACPI interpreter initialization.

There are a few other behavioral changes here:

- Validate all MMCONFIG configurations provided, not just the first one.

- Validate the entire required length of each configuration according to
  the provided ending bus number is reserved, not just the minimum required
  allocation.

- Validate that the area is reserved even if we read it from the chipset
  directly and not from the MCFG table.  This catches the case where the
  BIOS didn't set the location properly in the chipset and has mapped it
  over other things it shouldn't have.

This also cleans up the MMCONFIG initialization functions so that they
simply do nothing if MMCONFIG is not compiled in.

Based on an original patch by Rajesh Shah from Intel.

[akpm@linux-foundation.org: many fixes and cleanups]
Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Andi Kleen <ak@suse.de>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26 23:41:03 +02:00

36 lines
837 B
C

#include <linux/pci.h>
#include <linux/init.h>
#include "pci.h"
/* arch_initcall has too random ordering, so call the initializers
in the right sequence from here. */
static __init int pci_access_init(void)
{
int type __maybe_unused = 0;
#ifdef CONFIG_PCI_DIRECT
type = pci_direct_probe();
#endif
pci_mmcfg_early_init(type);
if (raw_pci_ops)
return 0;
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
#endif
/*
* don't check for raw_pci_ops here because we want pcbios as last
* fallback, yet it's needed to run first to set pcibios_last_bus
* in case legacy PCI probing is used. otherwise detecting peer busses
* fails.
*/
#ifdef CONFIG_PCI_DIRECT
pci_direct_init(type);
#endif
if (!raw_pci_ops)
printk(KERN_ERR
"PCI: Fatal: No config space access function found\n");
return 0;
}
arch_initcall(pci_access_init);