linux/drivers/mfd/tmio_core.c
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

71 lines
1.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2009 Ian Molton <spyro@f2s.com>
*/
#include <linux/export.h>
#include <linux/mfd/tmio.h>
#define CNF_CMD 0x04
#define CNF_CTL_BASE 0x10
#define CNF_INT_PIN 0x3d
#define CNF_STOP_CLK_CTL 0x40
#define CNF_GCLK_CTL 0x41
#define CNF_SD_CLK_MODE 0x42
#define CNF_PIN_STATUS 0x44
#define CNF_PWR_CTL_1 0x48
#define CNF_PWR_CTL_2 0x49
#define CNF_PWR_CTL_3 0x4a
#define CNF_CARD_DETECT_MODE 0x4c
#define CNF_SD_SLOT 0x50
#define CNF_EXT_GCLK_CTL_1 0xf0
#define CNF_EXT_GCLK_CTL_2 0xf1
#define CNF_EXT_GCLK_CTL_3 0xf9
#define CNF_SD_LED_EN_1 0xfa
#define CNF_SD_LED_EN_2 0xfe
#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
{
/* Enable the MMC/SD Control registers */
sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
/* Disable SD power during suspend */
sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01);
/* The below is required but why? FIXME */
sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f);
/* Power down SD bus */
sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00);
return 0;
}
EXPORT_SYMBOL(tmio_core_mmc_enable);
int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base)
{
/* Enable the MMC/SD Control registers */
sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
return 0;
}
EXPORT_SYMBOL(tmio_core_mmc_resume);
void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state)
{
sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00);
}
EXPORT_SYMBOL(tmio_core_mmc_pwr);
void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state)
{
sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0);
}
EXPORT_SYMBOL(tmio_core_mmc_clk_div);