linux/sound/pci/mixart/mixart_hwdep.h
Thomas Gleixner 1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00

142 lines
5.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Driver for Digigram miXart soundcards
*
* definitions and makros for basic card access
*
* Copyright (c) 2003 by Digigram <alsa@digigram.com>
*/
#ifndef __SOUND_MIXART_HWDEP_H
#define __SOUND_MIXART_HWDEP_H
#include <sound/hwdep.h>
#ifndef readl_be
#define readl_be(x) be32_to_cpu((__force __be32)__raw_readl(x))
#endif
#ifndef writel_be
#define writel_be(data,addr) __raw_writel((__force u32)cpu_to_be32(data),addr)
#endif
#ifndef readl_le
#define readl_le(x) le32_to_cpu((__force __le32)__raw_readl(x))
#endif
#ifndef writel_le
#define writel_le(data,addr) __raw_writel((__force u32)cpu_to_le32(data),addr)
#endif
#define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x))
#define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x))
/* Daughter board Type */
#define DAUGHTER_TYPE_MASK 0x0F
#define DAUGHTER_VER_MASK 0xF0
#define DAUGHTER_TYPEVER_MASK (DAUGHTER_TYPE_MASK|DAUGHTER_VER_MASK)
#define MIXART_DAUGHTER_TYPE_NONE 0x00
#define MIXART_DAUGHTER_TYPE_COBRANET 0x08
#define MIXART_DAUGHTER_TYPE_AES 0x0E
#define MIXART_BA0_SIZE (16 * 1024 * 1024) /* 16M */
#define MIXART_BA1_SIZE (4 * 1024) /* 4k */
/*
* -----------BAR 0 --------------------------------------------------------------------------------------------------------
*/
#define MIXART_PSEUDOREG 0x2000 /* base address for pseudoregister */
#define MIXART_PSEUDOREG_BOARDNUMBER MIXART_PSEUDOREG+0 /* board number */
/* perfmeter (available when elf loaded)*/
#define MIXART_PSEUDOREG_PERF_STREAM_LOAD_OFFSET MIXART_PSEUDOREG+0x70 /* streaming load */
#define MIXART_PSEUDOREG_PERF_SYSTEM_LOAD_OFFSET MIXART_PSEUDOREG+0x78 /* system load (reference)*/
#define MIXART_PSEUDOREG_PERF_MAILBX_LOAD_OFFSET MIXART_PSEUDOREG+0x7C /* mailbox load */
#define MIXART_PSEUDOREG_PERF_INTERR_LOAD_OFFSET MIXART_PSEUDOREG+0x74 /* interrupt handling load */
/* motherboard xilinx loader info */
#define MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x9C /* 0x00600000 */
#define MIXART_PSEUDOREG_MXLX_SIZE_OFFSET MIXART_PSEUDOREG+0xA0 /* xilinx size in bytes */
#define MIXART_PSEUDOREG_MXLX_STATUS_OFFSET MIXART_PSEUDOREG+0xA4 /* status = EMBEBBED_STAT_XXX */
/* elf loader info */
#define MIXART_PSEUDOREG_ELF_STATUS_OFFSET MIXART_PSEUDOREG+0xB0 /* status = EMBEBBED_STAT_XXX */
/*
* after the elf code is loaded, and the flowtable info was passed to it,
* the driver polls on this address, until it shows 1 (presence) or 2 (absence)
* once it is non-zero, the daughter board type may be read
*/
#define MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET MIXART_PSEUDOREG+0x990
/* Global info structure */
#define MIXART_PSEUDOREG_DBRD_TYPE_OFFSET MIXART_PSEUDOREG+0x994 /* Type and version of daughterboard */
/* daughterboard xilinx loader info */
#define MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x998 /* get the address here where to write the file */
#define MIXART_PSEUDOREG_DXLX_SIZE_OFFSET MIXART_PSEUDOREG+0x99C /* xilinx size in bytes */
#define MIXART_PSEUDOREG_DXLX_STATUS_OFFSET MIXART_PSEUDOREG+0x9A0 /* status = EMBEBBED_STAT_XXX */
/* */
#define MIXART_FLOWTABLE_PTR 0x3000 /* pointer to flow table */
/* mailbox addresses */
/* message DRV -> EMB */
#define MSG_INBOUND_POST_HEAD 0x010008 /* DRV posts MF + increment4 */
#define MSG_INBOUND_POST_TAIL 0x01000C /* EMB gets MF + increment4 */
/* message EMB -> DRV */
#define MSG_OUTBOUND_POST_TAIL 0x01001C /* DRV gets MF + increment4 */
#define MSG_OUTBOUND_POST_HEAD 0x010018 /* EMB posts MF + increment4 */
/* Get Free Frames */
#define MSG_INBOUND_FREE_TAIL 0x010004 /* DRV gets MFA + increment4 */
#define MSG_OUTBOUND_FREE_TAIL 0x010014 /* EMB gets MFA + increment4 */
/* Put Free Frames */
#define MSG_OUTBOUND_FREE_HEAD 0x010010 /* DRV puts MFA + increment4 */
#define MSG_INBOUND_FREE_HEAD 0x010000 /* EMB puts MFA + increment4 */
/* firmware addresses of the message fifos */
#define MSG_BOUND_STACK_SIZE 0x004000 /* size of each following stack */
/* posted messages */
#define MSG_OUTBOUND_POST_STACK 0x108000 /* stack of messages to the DRV */
#define MSG_INBOUND_POST_STACK 0x104000 /* stack of messages to the EMB */
/* available empty messages */
#define MSG_OUTBOUND_FREE_STACK 0x10C000 /* stack of free enveloped for EMB */
#define MSG_INBOUND_FREE_STACK 0x100000 /* stack of free enveloped for DRV */
/* defines for mailbox message frames */
#define MSG_FRAME_OFFSET 0x64
#define MSG_FRAME_SIZE 0x6400
#define MSG_FRAME_NUMBER 32
#define MSG_FROM_AGENT_ITMF_OFFSET (MSG_FRAME_OFFSET + (MSG_FRAME_SIZE * MSG_FRAME_NUMBER))
#define MSG_TO_AGENT_ITMF_OFFSET (MSG_FROM_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
#define MSG_HOST_RSC_PROTECTION (MSG_TO_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
#define MSG_AGENT_RSC_PROTECTION (MSG_HOST_RSC_PROTECTION + 4)
/*
* -----------BAR 1 --------------------------------------------------------------------------------------------------------
*/
/* interrupt addresses and constants */
#define MIXART_PCI_OMIMR_OFFSET 0x34 /* outbound message interrupt mask register */
#define MIXART_PCI_OMISR_OFFSET 0x30 /* outbound message interrupt status register */
#define MIXART_PCI_ODBR_OFFSET 0x60 /* outbound doorbell register */
#define MIXART_BA1_BRUTAL_RESET_OFFSET 0x68 /* write 1 in LSBit to reset board */
#define MIXART_HOST_ALL_INTERRUPT_MASKED 0x02B /* 0000 0010 1011 */
#define MIXART_ALLOW_OUTBOUND_DOORBELL 0x023 /* 0000 0010 0011 */
#define MIXART_OIDI 0x008 /* 0000 0000 1000 */
int snd_mixart_setup_firmware(struct mixart_mgr *mgr);
#endif /* __SOUND_MIXART_HWDEP_H */