linux/drivers/acpi/acpica/evgpe.c
Lv Zheng 75c8044fb3 ACPICA: Cleanup updated comments.
This is a cosmetic patch only. Comparison of the resulting binary showed
only line number differences.

This patch does not affect the generation of the Linux binary.
This patch decreases 558 lines of 20121018 divergence.diff.

This patch reduces the source code diff between Linux and ACPICA by
cleaning the comments that already have been updated in ACPICA.

There is no extra indentation done in this patch. Even the empty line
deletions and insertions are also splitted into another cleanup patch so
that this patch can be easily reviewed, and the binary differences can be
held to a lowest level.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10 12:36:17 +01:00

791 lines
22 KiB
C

/******************************************************************************
*
* Module Name: evgpe - General Purpose Event handling and dispatch
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpe")
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context);
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context);
/*******************************************************************************
*
* FUNCTION: acpi_ev_update_gpe_enable_mask
*
* PARAMETERS: gpe_event_info - GPE to update
*
* RETURN: Status
*
* DESCRIPTION: Updates GPE register enable mask based upon whether there are
* runtime references to this GPE
*
******************************************************************************/
acpi_status
acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
u32 register_bit;
ACPI_FUNCTION_TRACE(ev_update_gpe_enable_mask);
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
/* Clear the run bit up front */
ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
/* Set the mask bit only if there are references to this GPE */
if (gpe_event_info->runtime_count) {
ACPI_SET_BIT(gpe_register_info->enable_for_run,
(u8)register_bit);
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_enable_gpe
*
* PARAMETERS: gpe_event_info - GPE to enable
*
* RETURN: Status
*
* DESCRIPTION: Clear a GPE of stale events and enable it.
*
******************************************************************************/
acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ev_enable_gpe);
/*
* We will only allow a GPE to be enabled if it has either an associated
* method (_Lxx/_Exx) or a handler, or is using the implicit notify
* feature. Otherwise, the GPE will be immediately disabled by
* acpi_ev_gpe_dispatch the first time it fires.
*/
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_NONE) {
return_ACPI_STATUS(AE_NO_HANDLER);
}
/* Clear the GPE (of stale events) */
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Enable the requested GPE */
status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_add_gpe_reference
*
* PARAMETERS: gpe_event_info - Add a reference to this GPE
*
* RETURN: Status
*
* DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
* hardware-enabled.
*
******************************************************************************/
acpi_status
acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(ev_add_gpe_reference);
if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
return_ACPI_STATUS(AE_LIMIT);
}
gpe_event_info->runtime_count++;
if (gpe_event_info->runtime_count == 1) {
/* Enable on first reference */
status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
if (ACPI_SUCCESS(status)) {
status = acpi_ev_enable_gpe(gpe_event_info);
}
if (ACPI_FAILURE(status)) {
gpe_event_info->runtime_count--;
}
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_remove_gpe_reference
*
* PARAMETERS: gpe_event_info - Remove a reference to this GPE
*
* RETURN: Status
*
* DESCRIPTION: Remove a reference to a GPE. When the last reference is
* removed, the GPE is hardware-disabled.
*
******************************************************************************/
acpi_status
acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(ev_remove_gpe_reference);
if (!gpe_event_info->runtime_count) {
return_ACPI_STATUS(AE_LIMIT);
}
gpe_event_info->runtime_count--;
if (!gpe_event_info->runtime_count) {
/* Disable on last reference */
status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
if (ACPI_SUCCESS(status)) {
status =
acpi_hw_low_set_gpe(gpe_event_info,
ACPI_GPE_DISABLE);
}
if (ACPI_FAILURE(status)) {
gpe_event_info->runtime_count++;
}
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_low_get_gpe_info
*
* PARAMETERS: gpe_number - Raw GPE number
* gpe_block - A GPE info block
*
* RETURN: A GPE event_info struct. NULL if not a valid GPE (The gpe_number
* is not within the specified GPE block)
*
* DESCRIPTION: Returns the event_info struct associated with this GPE. This is
* the low-level implementation of ev_get_gpe_event_info.
*
******************************************************************************/
struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number,
struct acpi_gpe_block_info
*gpe_block)
{
u32 gpe_index;
/*
* Validate that the gpe_number is within the specified gpe_block.
* (Two steps)
*/
if (!gpe_block || (gpe_number < gpe_block->block_base_number)) {
return (NULL);
}
gpe_index = gpe_number - gpe_block->block_base_number;
if (gpe_index >= gpe_block->gpe_count) {
return (NULL);
}
return (&gpe_block->event_info[gpe_index]);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_get_gpe_event_info
*
* PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1
* gpe_number - Raw GPE number
*
* RETURN: A GPE event_info struct. NULL if not a valid GPE
*
* DESCRIPTION: Returns the event_info struct associated with this GPE.
* Validates the gpe_block and the gpe_number
*
* Should be called only when the GPE lists are semaphore locked
* and not subject to change.
*
******************************************************************************/
struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
u32 gpe_number)
{
union acpi_operand_object *obj_desc;
struct acpi_gpe_event_info *gpe_info;
u32 i;
ACPI_FUNCTION_ENTRY();
/* A NULL gpe_device means use the FADT-defined GPE block(s) */
if (!gpe_device) {
/* Examine GPE Block 0 and 1 (These blocks are permanent) */
for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
gpe_info = acpi_ev_low_get_gpe_info(gpe_number,
acpi_gbl_gpe_fadt_blocks
[i]);
if (gpe_info) {
return (gpe_info);
}
}
/* The gpe_number was not in the range of either FADT GPE block */
return (NULL);
}
/* A Non-NULL gpe_device means this is a GPE Block Device */
obj_desc =
acpi_ns_get_attached_object((struct acpi_namespace_node *)
gpe_device);
if (!obj_desc || !obj_desc->device.gpe_block) {
return (NULL);
}
return (acpi_ev_low_get_gpe_info
(gpe_number, obj_desc->device.gpe_block));
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_gpe_detect
*
* PARAMETERS: gpe_xrupt_list - Interrupt block for this interrupt.
* Can have multiple GPE blocks attached.
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
* DESCRIPTION: Detect if any GP events have occurred. This function is
* executed at interrupt level.
*
******************************************************************************/
u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
{
acpi_status status;
struct acpi_gpe_block_info *gpe_block;
struct acpi_gpe_register_info *gpe_register_info;
u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
u8 enabled_status_byte;
u32 status_reg;
u32 enable_reg;
acpi_cpu_flags flags;
u32 i;
u32 j;
ACPI_FUNCTION_NAME(ev_gpe_detect);
/* Check for the case where there are no GPEs */
if (!gpe_xrupt_list) {
return (int_status);
}
/*
* We need to obtain the GPE lock for both the data structs and registers
* Note: Not necessary to obtain the hardware lock, since the GPE
* registers are owned by the gpe_lock.
*/
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Examine all GPE blocks attached to this interrupt level */
gpe_block = gpe_xrupt_list->gpe_block_list_head;
while (gpe_block) {
/*
* Read all of the 8-bit GPE status and enable registers in this GPE
* block, saving all of them. Find all currently active GP events.
*/
for (i = 0; i < gpe_block->register_count; i++) {
/* Get the next status/enable pair */
gpe_register_info = &gpe_block->register_info[i];
/*
* Optimization: If there are no GPEs enabled within this
* register, we can safely ignore the entire register.
*/
if (!(gpe_register_info->enable_for_run |
gpe_register_info->enable_for_wake)) {
ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
"Ignore disabled registers for GPE%02X-GPE%02X: "
"RunEnable=%02X, WakeEnable=%02X\n",
gpe_register_info->
base_gpe_number,
gpe_register_info->
base_gpe_number +
(ACPI_GPE_REGISTER_WIDTH - 1),
gpe_register_info->
enable_for_run,
gpe_register_info->
enable_for_wake));
continue;
}
/* Read the Status Register */
status =
acpi_hw_read(&status_reg,
&gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Read the Enable Register */
status =
acpi_hw_read(&enable_reg,
&gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
"Read registers for GPE%02X-GPE%02X: Status=%02X, Enable=%02X, "
"RunEnable=%02X, WakeEnable=%02X\n",
gpe_register_info->base_gpe_number,
gpe_register_info->base_gpe_number +
(ACPI_GPE_REGISTER_WIDTH - 1),
status_reg, enable_reg,
gpe_register_info->enable_for_run,
gpe_register_info->enable_for_wake));
/* Check if there is anything active at all in this register */
enabled_status_byte = (u8) (status_reg & enable_reg);
if (!enabled_status_byte) {
/* No active GPEs in this register, move on */
continue;
}
/* Now look at the individual GPEs in this byte register */
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
/* Examine one GPE bit */
if (enabled_status_byte & (1 << j)) {
/*
* Found an active GPE. Dispatch the event to a handler
* or method.
*/
int_status |=
acpi_ev_gpe_dispatch(gpe_block->
node,
&gpe_block->
event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j], j + gpe_register_info->base_gpe_number);
}
}
}
gpe_block = gpe_block->next;
}
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return (int_status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_asynch_execute_gpe_method
*
* PARAMETERS: Context (gpe_event_info) - Info for this GPE
*
* RETURN: None
*
* DESCRIPTION: Perform the actual execution of a GPE control method. This
* function is called from an invocation of acpi_os_execute and
* therefore does NOT execute at interrupt level - so that
* the control method itself is not executed in the context of
* an interrupt handler.
*
******************************************************************************/
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = context;
acpi_status status;
struct acpi_gpe_event_info *local_gpe_event_info;
struct acpi_evaluate_info *info;
struct acpi_gpe_notify_info *notify;
ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
/* Allocate a local GPE block */
local_gpe_event_info =
ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_event_info));
if (!local_gpe_event_info) {
ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, "while handling a GPE"));
return_VOID;
}
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
ACPI_FREE(local_gpe_event_info);
return_VOID;
}
/* Must revalidate the gpe_number/gpe_block */
if (!acpi_ev_valid_gpe_event(gpe_event_info)) {
status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
ACPI_FREE(local_gpe_event_info);
return_VOID;
}
/*
* Take a snapshot of the GPE info for this level - we copy the info to
* prevent a race condition with remove_handler/remove_block.
*/
ACPI_MEMCPY(local_gpe_event_info, gpe_event_info,
sizeof(struct acpi_gpe_event_info));
status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_VOID;
}
/* Do the correct dispatch - normal method or implicit notify */
switch (local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
case ACPI_GPE_DISPATCH_NOTIFY:
/*
* Implicit notify.
* Dispatch a DEVICE_WAKE notify to the appropriate handler.
* NOTE: the request is queued for execution after this method
* completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
*
* June 2012: Expand implicit notify mechanism to support
* notifies on multiple device objects.
*/
notify = local_gpe_event_info->dispatch.notify_list;
while (ACPI_SUCCESS(status) && notify) {
status =
acpi_ev_queue_notify_request(notify->device_node,
ACPI_NOTIFY_DEVICE_WAKE);
notify = notify->next;
}
break;
case ACPI_GPE_DISPATCH_METHOD:
/* Allocate the evaluation information block */
info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
if (!info) {
status = AE_NO_MEMORY;
} else {
/*
* Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the
* _Lxx/_Exx control method that corresponds to this GPE
*/
info->prefix_node =
local_gpe_event_info->dispatch.method_node;
info->flags = ACPI_IGNORE_RETURN_VALUE;
status = acpi_ns_evaluate(info);
ACPI_FREE(info);
}
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"while evaluating GPE method [%4.4s]",
acpi_ut_get_node_name
(local_gpe_event_info->dispatch.
method_node)));
}
break;
default:
return_VOID; /* Should never happen */
}
/* Defer enabling of GPE until all notify handlers are done */
status = acpi_os_execute(OSL_NOTIFY_HANDLER,
acpi_ev_asynch_enable_gpe,
local_gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_FREE(local_gpe_event_info);
}
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_asynch_enable_gpe
*
* PARAMETERS: Context (gpe_event_info) - Info for this GPE
* Callback from acpi_os_execute
*
* RETURN: None
*
* DESCRIPTION: Asynchronous clear/enable for GPE. This allows the GPE to
* complete (i.e., finish execution of Notify)
*
******************************************************************************/
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = context;
(void)acpi_ev_finish_gpe(gpe_event_info);
ACPI_FREE(gpe_event_info);
return;
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_finish_gpe
*
* PARAMETERS: gpe_event_info - Info for this GPE
*
* RETURN: Status
*
* DESCRIPTION: Clear/Enable a GPE. Common code that is used after execution
* of a GPE method or a synchronous or asynchronous GPE handler.
*
******************************************************************************/
acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
ACPI_GPE_LEVEL_TRIGGERED) {
/*
* GPE is level-triggered, we clear the GPE status bit after
* handling the event.
*/
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
return (status);
}
}
/*
* Enable this GPE, conditionally. This means that the GPE will
* only be physically enabled if the enable_for_run bit is set
* in the event_info.
*/
(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE);
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_gpe_dispatch
*
* PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1
* gpe_event_info - Info for this GPE
* gpe_number - Number relative to the parent GPE block
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
* DESCRIPTION: Dispatch a General Purpose Event to either a function (e.g. EC)
* or method (e.g. _Lxx/_Exx) handler.
*
* This function executes at interrupt level.
*
******************************************************************************/
u32
acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
{
acpi_status status;
u32 return_value;
ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
/* Invoke global event handler if present */
acpi_gpe_count++;
if (acpi_gbl_global_event_handler) {
acpi_gbl_global_event_handler(ACPI_EVENT_TYPE_GPE, gpe_device,
gpe_number,
acpi_gbl_global_event_handler_context);
}
/*
* If edge-triggered, clear the GPE status bit now. Note that
* level-triggered events are cleared after the GPE is serviced.
*/
if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
ACPI_GPE_EDGE_TRIGGERED) {
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to clear GPE%02X", gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
/*
* Always disable the GPE so that it does not keep firing before
* any asynchronous activity completes (either from the execution
* of a GPE method or an asynchronous GPE handler.)
*
* If there is no handler or method to run, just disable the
* GPE and leave it disabled permanently to prevent further such
* pointless events from firing.
*/
status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to disable GPE%02X", gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
/*
* Dispatch the GPE to either an installed handler or the control
* method associated with this GPE (_Lxx or _Exx). If a handler
* exists, we invoke it and do not attempt to run the method.
* If there is neither a handler nor a method, leave the GPE
* disabled.
*/
switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
case ACPI_GPE_DISPATCH_HANDLER:
/* Invoke the installed handler (at interrupt level) */
return_value =
gpe_event_info->dispatch.handler->address(gpe_device,
gpe_number,
gpe_event_info->
dispatch.handler->
context);
/* If requested, clear (if level-triggered) and reenable the GPE */
if (return_value & ACPI_REENABLE_GPE) {
(void)acpi_ev_finish_gpe(gpe_event_info);
}
break;
case ACPI_GPE_DISPATCH_METHOD:
case ACPI_GPE_DISPATCH_NOTIFY:
/*
* Execute the method associated with the GPE
* NOTE: Level-triggered GPEs are cleared after the method completes.
*/
status = acpi_os_execute(OSL_GPE_HANDLER,
acpi_ev_asynch_execute_gpe_method,
gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to queue handler for GPE%2X - event disabled",
gpe_number));
}
break;
default:
/*
* No handler or method to run!
* 03/2010: This case should no longer be possible. We will not allow
* a GPE to be enabled if it has no handler or method.
*/
ACPI_ERROR((AE_INFO,
"No handler or method for GPE%02X, disabling event",
gpe_number));
break;
}
return_UINT32(ACPI_INTERRUPT_HANDLED);
}
#endif /* !ACPI_REDUCED_HARDWARE */