linux/arch/powerpc/platforms/iseries/irq.c
Stephen Rothwell 0d177df15d [PATCH] powerpc: move iSeries PCI devices to the device tree
Move the probing of PCI devices to setup.c and put them all into the
flattened device tree.  The later probing is now done by traversing the
device tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00

368 lines
9.8 KiB
C

/*
* This module supports the iSeries PCI bus interrupt handling
* Copyright (C) 20yy <Robert L Holtorf> <IBM Corp>
* Copyright (C) 2004-2005 IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the:
* Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330,
* Boston, MA 02111-1307 USA
*
* Change Activity:
* Created, December 13, 2000 by Wayne Holm
* End Change Activity
*/
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/threads.h>
#include <linux/smp.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/bootmem.h>
#include <linux/ide.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <asm/paca.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_xm.h>
#include <asm/iseries/it_lp_queue.h>
#include "irq.h"
#include "pci.h"
#include "call_pci.h"
#if defined(CONFIG_SMP)
extern void iSeries_smp_message_recv(struct pt_regs *);
#endif
#ifdef CONFIG_PCI
enum pci_event_type {
pe_bus_created = 0, /* PHB has been created */
pe_bus_error = 1, /* PHB has failed */
pe_bus_failed = 2, /* Msg to Secondary, Primary failed bus */
pe_node_failed = 4, /* Multi-adapter bridge has failed */
pe_node_recovered = 5, /* Multi-adapter bridge has recovered */
pe_bus_recovered = 12, /* PHB has been recovered */
pe_unquiese_bus = 18, /* Secondary bus unqiescing */
pe_bridge_error = 21, /* Bridge Error */
pe_slot_interrupt = 22 /* Slot interrupt */
};
struct pci_event {
struct HvLpEvent event;
union {
u64 __align; /* Align on an 8-byte boundary */
struct {
u32 fisr;
HvBusNumber bus_number;
HvSubBusNumber sub_bus_number;
HvAgentId dev_id;
} slot;
struct {
HvBusNumber bus_number;
HvSubBusNumber sub_bus_number;
} bus;
struct {
HvBusNumber bus_number;
HvSubBusNumber sub_bus_number;
HvAgentId dev_id;
} node;
} data;
};
static DEFINE_SPINLOCK(pending_irqs_lock);
static int num_pending_irqs;
static int pending_irqs[NR_IRQS];
static void int_received(struct pci_event *event, struct pt_regs *regs)
{
int irq;
switch (event->event.xSubtype) {
case pe_slot_interrupt:
irq = event->event.xCorrelationToken;
if (irq < NR_IRQS) {
spin_lock(&pending_irqs_lock);
pending_irqs[irq]++;
num_pending_irqs++;
spin_unlock(&pending_irqs_lock);
} else {
printk(KERN_WARNING "int_received: bad irq number %d\n",
irq);
HvCallPci_eoi(event->data.slot.bus_number,
event->data.slot.sub_bus_number,
event->data.slot.dev_id);
}
break;
/* Ignore error recovery events for now */
case pe_bus_created:
printk(KERN_INFO "int_received: system bus %d created\n",
event->data.bus.bus_number);
break;
case pe_bus_error:
case pe_bus_failed:
printk(KERN_INFO "int_received: system bus %d failed\n",
event->data.bus.bus_number);
break;
case pe_bus_recovered:
case pe_unquiese_bus:
printk(KERN_INFO "int_received: system bus %d recovered\n",
event->data.bus.bus_number);
break;
case pe_node_failed:
case pe_bridge_error:
printk(KERN_INFO
"int_received: multi-adapter bridge %d/%d/%d failed\n",
event->data.node.bus_number,
event->data.node.sub_bus_number,
event->data.node.dev_id);
break;
case pe_node_recovered:
printk(KERN_INFO
"int_received: multi-adapter bridge %d/%d/%d recovered\n",
event->data.node.bus_number,
event->data.node.sub_bus_number,
event->data.node.dev_id);
break;
default:
printk(KERN_ERR
"int_received: unrecognized event subtype 0x%x\n",
event->event.xSubtype);
break;
}
}
static void pci_event_handler(struct HvLpEvent *event, struct pt_regs *regs)
{
if (event && (event->xType == HvLpEvent_Type_PciIo)) {
if (hvlpevent_is_int(event))
int_received((struct pci_event *)event, regs);
else
printk(KERN_ERR
"pci_event_handler: unexpected ack received\n");
} else if (event)
printk(KERN_ERR
"pci_event_handler: Unrecognized PCI event type 0x%x\n",
(int)event->xType);
else
printk(KERN_ERR "pci_event_handler: NULL event received\n");
}
/*
* This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c
* It must be called before the bus walk.
*/
void __init iSeries_init_IRQ(void)
{
/* Register PCI event handler and open an event path */
int ret;
ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
&pci_event_handler);
if (ret == 0) {
ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
if (ret != 0)
printk(KERN_ERR "iseries_init_IRQ: open event path "
"failed with rc 0x%x\n", ret);
} else
printk(KERN_ERR "iseries_init_IRQ: register handler "
"failed with rc 0x%x\n", ret);
}
#define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff)
#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1)
#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1)
#define REAL_IRQ_TO_FUNC(irq) ((irq) & 7)
/*
* This will be called by device drivers (via enable_IRQ)
* to enable INTA in the bridge interrupt status register.
*/
static void iseries_enable_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Unmask secondary INTA */
mask = 0x80000000;
HvCallPci_unmaskInterrupts(bus, sub_bus, dev_id, mask);
}
/* This is called by iseries_activate_IRQs */
static unsigned int iseries_startup_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Link the IRQ number to the bridge */
HvCallXm_connectBusUnit(bus, sub_bus, dev_id, irq);
/* Unmask bridge interrupts in the FISR */
mask = 0x01010000 << function;
HvCallPci_unmaskFisr(bus, sub_bus, dev_id, mask);
iseries_enable_IRQ(irq);
return 0;
}
/*
* This is called out of iSeries_fixup to activate interrupt
* generation for usable slots
*/
void __init iSeries_activate_IRQs()
{
int irq;
unsigned long flags;
for_each_irq (irq) {
irq_desc_t *desc = get_irq_desc(irq);
if (desc && desc->handler && desc->handler->startup) {
spin_lock_irqsave(&desc->lock, flags);
desc->handler->startup(irq);
spin_unlock_irqrestore(&desc->lock, flags);
}
}
}
/* this is not called anywhere currently */
static void iseries_shutdown_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
/* irq should be locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Invalidate the IRQ number in the bridge */
HvCallXm_connectBusUnit(bus, sub_bus, dev_id, 0);
/* Mask bridge interrupts in the FISR */
mask = 0x01010000 << function;
HvCallPci_maskFisr(bus, sub_bus, dev_id, mask);
}
/*
* This will be called by device drivers (via disable_IRQ)
* to disable INTA in the bridge interrupt status register.
*/
static void iseries_disable_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Mask secondary INTA */
mask = 0x80000000;
HvCallPci_maskInterrupts(bus, sub_bus, dev_id, mask);
}
static void iseries_end_IRQ(unsigned int irq)
{
unsigned int rirq = virt_irq_to_real_map[irq];
HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
(REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
}
static hw_irq_controller iSeries_IRQ_handler = {
.typename = "iSeries irq controller",
.startup = iseries_startup_IRQ,
.shutdown = iseries_shutdown_IRQ,
.enable = iseries_enable_IRQ,
.disable = iseries_disable_IRQ,
.end = iseries_end_IRQ
};
/*
* This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot
* It calculates the irq value for the slot.
* Note that sub_bus is always 0 (at the moment at least).
*/
int __init iSeries_allocate_IRQ(HvBusNumber bus,
HvSubBusNumber sub_bus, u32 bsubbus)
{
int virtirq;
unsigned int realirq;
u8 idsel = ISERIES_GET_DEVICE_FROM_SUBBUS(bsubbus);
u8 function = ISERIES_GET_FUNCTION_FROM_SUBBUS(bsubbus);
realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
+ function;
virtirq = virt_irq_create_mapping(realirq);
irq_desc[virtirq].handler = &iSeries_IRQ_handler;
return virtirq;
}
#endif /* CONFIG_PCI */
/*
* Get the next pending IRQ.
*/
int iSeries_get_irq(struct pt_regs *regs)
{
/* -2 means ignore this interrupt */
int irq = -2;
#ifdef CONFIG_SMP
if (get_lppaca()->int_dword.fields.ipi_cnt) {
get_lppaca()->int_dword.fields.ipi_cnt = 0;
iSeries_smp_message_recv(regs);
}
#endif /* CONFIG_SMP */
if (hvlpevent_is_pending())
process_hvlpevents(regs);
#ifdef CONFIG_PCI
if (num_pending_irqs) {
spin_lock(&pending_irqs_lock);
for (irq = 0; irq < NR_IRQS; irq++) {
if (pending_irqs[irq]) {
pending_irqs[irq]--;
num_pending_irqs--;
break;
}
}
spin_unlock(&pending_irqs_lock);
if (irq >= NR_IRQS)
irq = -2;
}
#endif
return irq;
}