linux/drivers/net/wireless/p54/p54spi.h
Christian Lamparter a2116993c1 p54spi: remove arch specific dependencies
On Friday 16 January 2009 20:33:43 Kalle Valo wrote:
> N800 and N810 support is not on mainline yet, for stlc45xx I decided
> to add module parameters for the gpio numbers. Here's the commit from
> stlc45xx repo:
>
> 35afc5df00

This is the same patch for p54spi.
It removes all N800/N810 specific code from p54spi, so the driver can be used on
other architectures, or configurations as well.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:44 -05:00

126 lines
3.1 KiB
C

/*
* Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
*
* This driver is a port from stlc45xx:
* Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#ifndef P54SPI_H
#define P54SPI_H
#include <linux/mutex.h>
#include <linux/list.h>
#include <net/mac80211.h>
#include "p54.h"
/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */
#define SPI_ADRS_READ_BIT_15 0x8000
#define SPI_ADRS_ARM_INTERRUPTS 0x00
#define SPI_ADRS_ARM_INT_EN 0x04
#define SPI_ADRS_HOST_INTERRUPTS 0x08
#define SPI_ADRS_HOST_INT_EN 0x0c
#define SPI_ADRS_HOST_INT_ACK 0x10
#define SPI_ADRS_GEN_PURP_1 0x14
#define SPI_ADRS_GEN_PURP_2 0x18
#define SPI_ADRS_DEV_CTRL_STAT 0x26 /* high word */
#define SPI_ADRS_DMA_DATA 0x28
#define SPI_ADRS_DMA_WRITE_CTRL 0x2c
#define SPI_ADRS_DMA_WRITE_LEN 0x2e
#define SPI_ADRS_DMA_WRITE_BASE 0x30
#define SPI_ADRS_DMA_READ_CTRL 0x34
#define SPI_ADRS_DMA_READ_LEN 0x36
#define SPI_ADRS_DMA_READ_BASE 0x38
#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000
#define SPI_CTRL_STAT_START_HALTED 0x4000
#define SPI_CTRL_STAT_RAM_BOOT 0x2000
#define SPI_CTRL_STAT_HOST_RESET 0x1000
#define SPI_CTRL_STAT_HOST_CPU_EN 0x0800
#define SPI_DMA_WRITE_CTRL_ENABLE 0x0001
#define SPI_DMA_READ_CTRL_ENABLE 0x0001
#define HOST_ALLOWED (1 << 7)
#define SPI_TIMEOUT 100 /* msec */
#define SPI_MAX_TX_PACKETS 32
#define SPI_MAX_PACKET_SIZE 32767
#define SPI_TARGET_INT_WAKEUP 0x00000001
#define SPI_TARGET_INT_SLEEP 0x00000002
#define SPI_TARGET_INT_RDDONE 0x00000004
#define SPI_TARGET_INT_CTS 0x00004000
#define SPI_TARGET_INT_DR 0x00008000
#define SPI_HOST_INT_READY 0x00000001
#define SPI_HOST_INT_WR_READY 0x00000002
#define SPI_HOST_INT_SW_UPDATE 0x00000004
#define SPI_HOST_INT_UPDATE 0x10000000
/* clear to send */
#define SPI_HOST_INT_CR 0x00004000
/* data ready */
#define SPI_HOST_INT_DR 0x00008000
#define SPI_HOST_INTS_DEFAULT \
(SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)
#define TARGET_BOOT_SLEEP 50
struct p54s_dma_regs {
__le16 cmd;
__le16 len;
__le32 addr;
} __attribute__ ((packed));
struct p54s_tx_info {
struct list_head tx_list;
};
struct p54s_priv {
/* p54_common has to be the first entry */
struct p54_common common;
struct ieee80211_hw *hw;
struct spi_device *spi;
struct work_struct work;
struct mutex mutex;
struct completion fw_comp;
spinlock_t tx_lock;
/* protected by tx_lock */
struct list_head tx_pending;
enum fw_state fw_state;
const struct firmware *firmware;
};
#endif /* P54SPI_H */