mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
52393ccc0a
set_wmb should not be used in the kernel because it just confuses the
code more and has no benefit. Since it is not currently used in the
kernel this patch removes it so that new code does not include it.
All archs define set_wmb(var, value) to do { var = value; wmb(); }
while(0) except ia64 and sparc which use a mb() instead. But this is
still moot since it is not used anyway.
Hasn't been tested on any archs but x86 and x86_64 (and only compiled
tested)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
266 lines
7.4 KiB
C
266 lines
7.4 KiB
C
/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */
|
|
|
|
#ifndef __SPARC_SYSTEM_H
|
|
#define __SPARC_SYSTEM_H
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/threads.h> /* NR_CPUS */
|
|
#include <linux/thread_info.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/psr.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/btfixup.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
/*
|
|
* Sparc (general) CPU types
|
|
*/
|
|
enum sparc_cpu {
|
|
sun4 = 0x00,
|
|
sun4c = 0x01,
|
|
sun4m = 0x02,
|
|
sun4d = 0x03,
|
|
sun4e = 0x04,
|
|
sun4u = 0x05, /* V8 ploos ploos */
|
|
sun_unknown = 0x06,
|
|
ap1000 = 0x07, /* almost a sun4m */
|
|
};
|
|
|
|
/* Really, userland should not be looking at any of this... */
|
|
#ifdef __KERNEL__
|
|
|
|
extern enum sparc_cpu sparc_cpu_model;
|
|
|
|
#ifndef CONFIG_SUN4
|
|
#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
|
|
#define ARCH_SUN4 0
|
|
#else
|
|
#define ARCH_SUN4C_SUN4 1
|
|
#define ARCH_SUN4 1
|
|
#endif
|
|
|
|
#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */
|
|
|
|
extern struct thread_info *current_set[NR_CPUS];
|
|
|
|
extern unsigned long empty_bad_page;
|
|
extern unsigned long empty_bad_page_table;
|
|
extern unsigned long empty_zero_page;
|
|
|
|
extern void sun_do_break(void);
|
|
extern int serial_console;
|
|
extern int stop_a_enabled;
|
|
|
|
static __inline__ int con_is_present(void)
|
|
{
|
|
return serial_console ? 0 : 1;
|
|
}
|
|
|
|
/* When a context switch happens we must flush all user windows so that
|
|
* the windows of the current process are flushed onto its stack. This
|
|
* way the windows are all clean for the next process and the stack
|
|
* frames are up to date.
|
|
*/
|
|
extern void flush_user_windows(void);
|
|
extern void kill_user_windows(void);
|
|
extern void synchronize_user_stack(void);
|
|
extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
|
|
void *fpqueue, unsigned long *fpqdepth);
|
|
|
|
#ifdef CONFIG_SMP
|
|
#define SWITCH_ENTER(prv) \
|
|
do { \
|
|
if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
|
|
put_psr(get_psr() | PSR_EF); \
|
|
fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
|
|
&(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
|
|
clear_tsk_thread_flag(prv, TIF_USEDFPU); \
|
|
(prv)->thread.kregs->psr &= ~PSR_EF; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define SWITCH_DO_LAZY_FPU(next) /* */
|
|
#else
|
|
#define SWITCH_ENTER(prv) /* */
|
|
#define SWITCH_DO_LAZY_FPU(nxt) \
|
|
do { \
|
|
if (last_task_used_math != (nxt)) \
|
|
(nxt)->thread.kregs->psr&=~PSR_EF; \
|
|
} while(0)
|
|
#endif
|
|
|
|
/*
|
|
* Flush windows so that the VM switch which follows
|
|
* would not pull the stack from under us.
|
|
*
|
|
* SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
|
|
* XXX WTF is the above comment? Found in late teen 2.4.x.
|
|
*/
|
|
#define prepare_arch_switch(next) do { \
|
|
__asm__ __volatile__( \
|
|
".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
|
|
"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
|
|
"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
|
|
"save %sp, -0x40, %sp\n\t" \
|
|
"restore; restore; restore; restore; restore; restore; restore"); \
|
|
} while(0)
|
|
|
|
/* Much care has gone into this code, do not touch it.
|
|
*
|
|
* We need to loadup regs l0/l1 for the newly forked child
|
|
* case because the trap return path relies on those registers
|
|
* holding certain values, gcc is told that they are clobbered.
|
|
* Gcc needs registers for 3 values in and 1 value out, so we
|
|
* clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM
|
|
*
|
|
* Hey Dave, that do not touch sign is too much of an incentive
|
|
* - Anton & Pete
|
|
*/
|
|
#define switch_to(prev, next, last) do { \
|
|
SWITCH_ENTER(prev); \
|
|
SWITCH_DO_LAZY_FPU(next); \
|
|
cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \
|
|
__asm__ __volatile__( \
|
|
"sethi %%hi(here - 0x8), %%o7\n\t" \
|
|
"mov %%g6, %%g3\n\t" \
|
|
"or %%o7, %%lo(here - 0x8), %%o7\n\t" \
|
|
"rd %%psr, %%g4\n\t" \
|
|
"std %%sp, [%%g6 + %4]\n\t" \
|
|
"rd %%wim, %%g5\n\t" \
|
|
"wr %%g4, 0x20, %%psr\n\t" \
|
|
"nop\n\t" \
|
|
"std %%g4, [%%g6 + %3]\n\t" \
|
|
"ldd [%2 + %3], %%g4\n\t" \
|
|
"mov %2, %%g6\n\t" \
|
|
".globl patchme_store_new_current\n" \
|
|
"patchme_store_new_current:\n\t" \
|
|
"st %2, [%1]\n\t" \
|
|
"wr %%g4, 0x20, %%psr\n\t" \
|
|
"nop\n\t" \
|
|
"nop\n\t" \
|
|
"nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \
|
|
"ldd [%%g6 + %4], %%sp\n\t" \
|
|
"wr %%g5, 0x0, %%wim\n\t" \
|
|
"ldd [%%sp + 0x00], %%l0\n\t" \
|
|
"ldd [%%sp + 0x38], %%i6\n\t" \
|
|
"wr %%g4, 0x0, %%psr\n\t" \
|
|
"nop\n\t" \
|
|
"nop\n\t" \
|
|
"jmpl %%o7 + 0x8, %%g0\n\t" \
|
|
" ld [%%g3 + %5], %0\n\t" \
|
|
"here:\n" \
|
|
: "=&r" (last) \
|
|
: "r" (&(current_set[hard_smp_processor_id()])), \
|
|
"r" (task_thread_info(next)), \
|
|
"i" (TI_KPSR), \
|
|
"i" (TI_KSP), \
|
|
"i" (TI_TASK) \
|
|
: "g1", "g2", "g3", "g4", "g5", "g7", \
|
|
"l0", "l1", "l3", "l4", "l5", "l6", "l7", \
|
|
"i0", "i1", "i2", "i3", "i4", "i5", \
|
|
"o0", "o1", "o2", "o3", "o7"); \
|
|
} while(0)
|
|
|
|
/*
|
|
* On SMP systems, when the scheduler does migration-cost autodetection,
|
|
* it needs a way to flush as much of the CPU's caches as possible.
|
|
*
|
|
* TODO: fill this in!
|
|
*/
|
|
static inline void sched_cacheflush(void)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Changing the IRQ level on the Sparc.
|
|
*/
|
|
extern void local_irq_restore(unsigned long);
|
|
extern unsigned long __local_irq_save(void);
|
|
extern void local_irq_enable(void);
|
|
|
|
static inline unsigned long getipl(void)
|
|
{
|
|
unsigned long retval;
|
|
|
|
__asm__ __volatile__("rd %%psr, %0" : "=r" (retval));
|
|
return retval;
|
|
}
|
|
|
|
#define local_save_flags(flags) ((flags) = getipl())
|
|
#define local_irq_save(flags) ((flags) = __local_irq_save())
|
|
#define local_irq_disable() ((void) __local_irq_save())
|
|
#define irqs_disabled() ((getipl() & PSR_PIL) != 0)
|
|
|
|
/* XXX Change this if we ever use a PSO mode kernel. */
|
|
#define mb() __asm__ __volatile__ ("" : : : "memory")
|
|
#define rmb() mb()
|
|
#define wmb() mb()
|
|
#define read_barrier_depends() do { } while(0)
|
|
#define set_mb(__var, __value) do { __var = __value; mb(); } while(0)
|
|
#define smp_mb() __asm__ __volatile__("":::"memory")
|
|
#define smp_rmb() __asm__ __volatile__("":::"memory")
|
|
#define smp_wmb() __asm__ __volatile__("":::"memory")
|
|
#define smp_read_barrier_depends() do { } while(0)
|
|
|
|
#define nop() __asm__ __volatile__ ("nop")
|
|
|
|
/* This has special calling conventions */
|
|
#ifndef CONFIG_SMP
|
|
BTFIXUPDEF_CALL(void, ___xchg32, void)
|
|
#endif
|
|
|
|
static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
|
|
{
|
|
#ifdef CONFIG_SMP
|
|
__asm__ __volatile__("swap [%2], %0"
|
|
: "=&r" (val)
|
|
: "0" (val), "r" (m)
|
|
: "memory");
|
|
return val;
|
|
#else
|
|
register unsigned long *ptr asm("g1");
|
|
register unsigned long ret asm("g2");
|
|
|
|
ptr = (unsigned long *) m;
|
|
ret = val;
|
|
|
|
/* Note: this is magic and the nop there is
|
|
really needed. */
|
|
__asm__ __volatile__(
|
|
"mov %%o7, %%g4\n\t"
|
|
"call ___f____xchg32\n\t"
|
|
" nop\n\t"
|
|
: "=&r" (ret)
|
|
: "0" (ret), "r" (ptr)
|
|
: "g3", "g4", "g7", "memory", "cc");
|
|
|
|
return ret;
|
|
#endif
|
|
}
|
|
|
|
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
|
|
#define tas(ptr) (xchg((ptr),1))
|
|
|
|
extern void __xchg_called_with_bad_pointer(void);
|
|
|
|
static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
|
|
{
|
|
switch (size) {
|
|
case 4:
|
|
return xchg_u32(ptr, x);
|
|
};
|
|
__xchg_called_with_bad_pointer();
|
|
return x;
|
|
}
|
|
|
|
extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
#define arch_align_stack(x) (x)
|
|
|
|
#endif /* !(__SPARC_SYSTEM_H) */
|