linux/net/wireless/chan.c
Thomas Pedersen 11b34737b1 nl80211: support setting S1G channels
S1G channels have a single width defined per frequency, so
derive it from the channel flags with
ieee80211_s1g_channel_width().

Also support setting an S1G channel where control frequency may
differ from operating, and add some basic validation to
ensure the control channel is with the operating.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18 12:31:17 +02:00

1334 lines
33 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* This file contains helper code to handle channel
* settings and keeping track of what is possible at
* any point in time.
*
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2018-2020 Intel Corporation
*/
#include <linux/export.h>
#include <linux/bitfield.h>
#include <net/cfg80211.h>
#include "core.h"
#include "rdev-ops.h"
static bool cfg80211_valid_60g_freq(u32 freq)
{
return freq >= 58320 && freq <= 70200;
}
void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
struct ieee80211_channel *chan,
enum nl80211_channel_type chan_type)
{
if (WARN_ON(!chan))
return;
chandef->chan = chan;
chandef->freq1_offset = chan->freq_offset;
chandef->center_freq2 = 0;
chandef->edmg.bw_config = 0;
chandef->edmg.channels = 0;
switch (chan_type) {
case NL80211_CHAN_NO_HT:
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
chandef->center_freq1 = chan->center_freq;
break;
case NL80211_CHAN_HT20:
chandef->width = NL80211_CHAN_WIDTH_20;
chandef->center_freq1 = chan->center_freq;
break;
case NL80211_CHAN_HT40PLUS:
chandef->width = NL80211_CHAN_WIDTH_40;
chandef->center_freq1 = chan->center_freq + 10;
break;
case NL80211_CHAN_HT40MINUS:
chandef->width = NL80211_CHAN_WIDTH_40;
chandef->center_freq1 = chan->center_freq - 10;
break;
default:
WARN_ON(1);
}
}
EXPORT_SYMBOL(cfg80211_chandef_create);
static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
{
int max_contiguous = 0;
int num_of_enabled = 0;
int contiguous = 0;
int i;
if (!chandef->edmg.channels || !chandef->edmg.bw_config)
return false;
if (!cfg80211_valid_60g_freq(chandef->chan->center_freq))
return false;
for (i = 0; i < 6; i++) {
if (chandef->edmg.channels & BIT(i)) {
contiguous++;
num_of_enabled++;
} else {
contiguous = 0;
}
max_contiguous = max(contiguous, max_contiguous);
}
/* basic verification of edmg configuration according to
* IEEE P802.11ay/D4.0 section 9.4.2.251
*/
/* check bw_config against contiguous edmg channels */
switch (chandef->edmg.bw_config) {
case IEEE80211_EDMG_BW_CONFIG_4:
case IEEE80211_EDMG_BW_CONFIG_8:
case IEEE80211_EDMG_BW_CONFIG_12:
if (max_contiguous < 1)
return false;
break;
case IEEE80211_EDMG_BW_CONFIG_5:
case IEEE80211_EDMG_BW_CONFIG_9:
case IEEE80211_EDMG_BW_CONFIG_13:
if (max_contiguous < 2)
return false;
break;
case IEEE80211_EDMG_BW_CONFIG_6:
case IEEE80211_EDMG_BW_CONFIG_10:
case IEEE80211_EDMG_BW_CONFIG_14:
if (max_contiguous < 3)
return false;
break;
case IEEE80211_EDMG_BW_CONFIG_7:
case IEEE80211_EDMG_BW_CONFIG_11:
case IEEE80211_EDMG_BW_CONFIG_15:
if (max_contiguous < 4)
return false;
break;
default:
return false;
}
/* check bw_config against aggregated (non contiguous) edmg channels */
switch (chandef->edmg.bw_config) {
case IEEE80211_EDMG_BW_CONFIG_4:
case IEEE80211_EDMG_BW_CONFIG_5:
case IEEE80211_EDMG_BW_CONFIG_6:
case IEEE80211_EDMG_BW_CONFIG_7:
break;
case IEEE80211_EDMG_BW_CONFIG_8:
case IEEE80211_EDMG_BW_CONFIG_9:
case IEEE80211_EDMG_BW_CONFIG_10:
case IEEE80211_EDMG_BW_CONFIG_11:
if (num_of_enabled < 2)
return false;
break;
case IEEE80211_EDMG_BW_CONFIG_12:
case IEEE80211_EDMG_BW_CONFIG_13:
case IEEE80211_EDMG_BW_CONFIG_14:
case IEEE80211_EDMG_BW_CONFIG_15:
if (num_of_enabled < 4 || max_contiguous < 2)
return false;
break;
default:
return false;
}
return true;
}
static int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width)
{
int mhz;
switch (chan_width) {
case NL80211_CHAN_WIDTH_1:
mhz = 1;
break;
case NL80211_CHAN_WIDTH_2:
mhz = 2;
break;
case NL80211_CHAN_WIDTH_4:
mhz = 4;
break;
case NL80211_CHAN_WIDTH_8:
mhz = 8;
break;
case NL80211_CHAN_WIDTH_16:
mhz = 16;
break;
case NL80211_CHAN_WIDTH_5:
mhz = 5;
break;
case NL80211_CHAN_WIDTH_10:
mhz = 10;
break;
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_20_NOHT:
mhz = 20;
break;
case NL80211_CHAN_WIDTH_40:
mhz = 40;
break;
case NL80211_CHAN_WIDTH_80P80:
case NL80211_CHAN_WIDTH_80:
mhz = 80;
break;
case NL80211_CHAN_WIDTH_160:
mhz = 160;
break;
default:
WARN_ON_ONCE(1);
return -1;
}
return mhz;
}
static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
{
return nl80211_chan_width_to_mhz(c->width);
}
bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
{
u32 control_freq, oper_freq;
int oper_width, control_width;
if (!chandef->chan)
return false;
if (chandef->freq1_offset >= 1000)
return false;
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_1:
case NL80211_CHAN_WIDTH_5:
case NL80211_CHAN_WIDTH_10:
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_20_NOHT:
if (ieee80211_chandef_to_khz(chandef) !=
ieee80211_channel_to_khz(chandef->chan))
return false;
if (chandef->center_freq2)
return false;
break;
case NL80211_CHAN_WIDTH_2:
case NL80211_CHAN_WIDTH_4:
case NL80211_CHAN_WIDTH_8:
case NL80211_CHAN_WIDTH_16:
control_freq = ieee80211_channel_to_khz(chandef->chan);
oper_freq = ieee80211_chandef_to_khz(chandef);
control_width = nl80211_chan_width_to_mhz(
ieee80211_s1g_channel_width(
chandef->chan));
oper_width = cfg80211_chandef_get_width(chandef);
if (oper_width < 0 || control_width < 0)
return false;
if (chandef->center_freq2)
return false;
if (control_freq + MHZ_TO_KHZ(control_width) / 2 >
oper_freq + MHZ_TO_KHZ(oper_width) / 2)
return false;
if (control_freq - MHZ_TO_KHZ(control_width) / 2 <
oper_freq - MHZ_TO_KHZ(oper_width) / 2)
return false;
break;
case NL80211_CHAN_WIDTH_40:
if (chandef->center_freq1 != control_freq + 10 &&
chandef->center_freq1 != control_freq - 10)
return false;
if (chandef->center_freq2)
return false;
break;
case NL80211_CHAN_WIDTH_80P80:
if (chandef->center_freq1 != control_freq + 30 &&
chandef->center_freq1 != control_freq + 10 &&
chandef->center_freq1 != control_freq - 10 &&
chandef->center_freq1 != control_freq - 30)
return false;
if (!chandef->center_freq2)
return false;
/* adjacent is not allowed -- that's a 160 MHz channel */
if (chandef->center_freq1 - chandef->center_freq2 == 80 ||
chandef->center_freq2 - chandef->center_freq1 == 80)
return false;
break;
case NL80211_CHAN_WIDTH_80:
if (chandef->center_freq1 != control_freq + 30 &&
chandef->center_freq1 != control_freq + 10 &&
chandef->center_freq1 != control_freq - 10 &&
chandef->center_freq1 != control_freq - 30)
return false;
if (chandef->center_freq2)
return false;
break;
case NL80211_CHAN_WIDTH_160:
if (chandef->center_freq1 != control_freq + 70 &&
chandef->center_freq1 != control_freq + 50 &&
chandef->center_freq1 != control_freq + 30 &&
chandef->center_freq1 != control_freq + 10 &&
chandef->center_freq1 != control_freq - 10 &&
chandef->center_freq1 != control_freq - 30 &&
chandef->center_freq1 != control_freq - 50 &&
chandef->center_freq1 != control_freq - 70)
return false;
if (chandef->center_freq2)
return false;
break;
default:
return false;
}
/* channel 14 is only for IEEE 802.11b */
if (chandef->center_freq1 == 2484 &&
chandef->width != NL80211_CHAN_WIDTH_20_NOHT)
return false;
if (cfg80211_chandef_is_edmg(chandef) &&
!cfg80211_edmg_chandef_valid(chandef))
return false;
return true;
}
EXPORT_SYMBOL(cfg80211_chandef_valid);
static void chandef_primary_freqs(const struct cfg80211_chan_def *c,
u32 *pri40, u32 *pri80)
{
int tmp;
switch (c->width) {
case NL80211_CHAN_WIDTH_40:
*pri40 = c->center_freq1;
*pri80 = 0;
break;
case NL80211_CHAN_WIDTH_80:
case NL80211_CHAN_WIDTH_80P80:
*pri80 = c->center_freq1;
/* n_P20 */
tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
/* n_P40 */
tmp /= 2;
/* freq_P40 */
*pri40 = c->center_freq1 - 20 + 40 * tmp;
break;
case NL80211_CHAN_WIDTH_160:
/* n_P20 */
tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
/* n_P40 */
tmp /= 2;
/* freq_P40 */
*pri40 = c->center_freq1 - 60 + 40 * tmp;
/* n_P80 */
tmp /= 2;
*pri80 = c->center_freq1 - 40 + 80 * tmp;
break;
default:
WARN_ON_ONCE(1);
}
}
const struct cfg80211_chan_def *
cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1,
const struct cfg80211_chan_def *c2)
{
u32 c1_pri40, c1_pri80, c2_pri40, c2_pri80;
/* If they are identical, return */
if (cfg80211_chandef_identical(c1, c2))
return c1;
/* otherwise, must have same control channel */
if (c1->chan != c2->chan)
return NULL;
/*
* If they have the same width, but aren't identical,
* then they can't be compatible.
*/
if (c1->width == c2->width)
return NULL;
/*
* can't be compatible if one of them is 5 or 10 MHz,
* but they don't have the same width.
*/
if (c1->width == NL80211_CHAN_WIDTH_5 ||
c1->width == NL80211_CHAN_WIDTH_10 ||
c2->width == NL80211_CHAN_WIDTH_5 ||
c2->width == NL80211_CHAN_WIDTH_10)
return NULL;
if (c1->width == NL80211_CHAN_WIDTH_20_NOHT ||
c1->width == NL80211_CHAN_WIDTH_20)
return c2;
if (c2->width == NL80211_CHAN_WIDTH_20_NOHT ||
c2->width == NL80211_CHAN_WIDTH_20)
return c1;
chandef_primary_freqs(c1, &c1_pri40, &c1_pri80);
chandef_primary_freqs(c2, &c2_pri40, &c2_pri80);
if (c1_pri40 != c2_pri40)
return NULL;
WARN_ON(!c1_pri80 && !c2_pri80);
if (c1_pri80 && c2_pri80 && c1_pri80 != c2_pri80)
return NULL;
if (c1->width > c2->width)
return c1;
return c2;
}
EXPORT_SYMBOL(cfg80211_chandef_compatible);
static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq,
u32 bandwidth,
enum nl80211_dfs_state dfs_state)
{
struct ieee80211_channel *c;
u32 freq;
for (freq = center_freq - bandwidth/2 + 10;
freq <= center_freq + bandwidth/2 - 10;
freq += 20) {
c = ieee80211_get_channel(wiphy, freq);
if (!c || !(c->flags & IEEE80211_CHAN_RADAR))
continue;
c->dfs_state = dfs_state;
c->dfs_state_entered = jiffies;
}
}
void cfg80211_set_dfs_state(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef,
enum nl80211_dfs_state dfs_state)
{
int width;
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return;
width = cfg80211_chandef_get_width(chandef);
if (width < 0)
return;
cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1,
width, dfs_state);
if (!chandef->center_freq2)
return;
cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2,
width, dfs_state);
}
static u32 cfg80211_get_start_freq(u32 center_freq,
u32 bandwidth)
{
u32 start_freq;
bandwidth = MHZ_TO_KHZ(bandwidth);
if (bandwidth <= MHZ_TO_KHZ(20))
start_freq = center_freq;
else
start_freq = center_freq - bandwidth / 2 + MHZ_TO_KHZ(10);
return start_freq;
}
static u32 cfg80211_get_end_freq(u32 center_freq,
u32 bandwidth)
{
u32 end_freq;
bandwidth = MHZ_TO_KHZ(bandwidth);
if (bandwidth <= MHZ_TO_KHZ(20))
end_freq = center_freq;
else
end_freq = center_freq + bandwidth / 2 - MHZ_TO_KHZ(10);
return end_freq;
}
static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy,
u32 center_freq,
u32 bandwidth)
{
struct ieee80211_channel *c;
u32 freq, start_freq, end_freq;
start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
c = ieee80211_get_channel_khz(wiphy, freq);
if (!c)
return -EINVAL;
if (c->flags & IEEE80211_CHAN_RADAR)
return 1;
}
return 0;
}
int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef,
enum nl80211_iftype iftype)
{
int width;
int ret;
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return -EINVAL;
switch (iftype) {
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_MESH_POINT:
width = cfg80211_chandef_get_width(chandef);
if (width < 0)
return -EINVAL;
ret = cfg80211_get_chans_dfs_required(wiphy,
ieee80211_chandef_to_khz(chandef),
width);
if (ret < 0)
return ret;
else if (ret > 0)
return BIT(chandef->width);
if (!chandef->center_freq2)
return 0;
ret = cfg80211_get_chans_dfs_required(wiphy,
MHZ_TO_KHZ(chandef->center_freq2),
width);
if (ret < 0)
return ret;
else if (ret > 0)
return BIT(chandef->width);
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_NAN:
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
WARN_ON(1);
}
return 0;
}
EXPORT_SYMBOL(cfg80211_chandef_dfs_required);
static int cfg80211_get_chans_dfs_usable(struct wiphy *wiphy,
u32 center_freq,
u32 bandwidth)
{
struct ieee80211_channel *c;
u32 freq, start_freq, end_freq;
int count = 0;
start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
/*
* Check entire range of channels for the bandwidth.
* Check all channels are DFS channels (DFS_USABLE or
* DFS_AVAILABLE). Return number of usable channels
* (require CAC). Allow DFS and non-DFS channel mix.
*/
for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
c = ieee80211_get_channel_khz(wiphy, freq);
if (!c)
return -EINVAL;
if (c->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
if (c->flags & IEEE80211_CHAN_RADAR) {
if (c->dfs_state == NL80211_DFS_UNAVAILABLE)
return -EINVAL;
if (c->dfs_state == NL80211_DFS_USABLE)
count++;
}
}
return count;
}
bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef)
{
int width;
int r1, r2 = 0;
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return false;
width = cfg80211_chandef_get_width(chandef);
if (width < 0)
return false;
r1 = cfg80211_get_chans_dfs_usable(wiphy,
MHZ_TO_KHZ(chandef->center_freq1),
width);
if (r1 < 0)
return false;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_80P80:
WARN_ON(!chandef->center_freq2);
r2 = cfg80211_get_chans_dfs_usable(wiphy,
MHZ_TO_KHZ(chandef->center_freq2),
width);
if (r2 < 0)
return false;
break;
default:
WARN_ON(chandef->center_freq2);
break;
}
return (r1 + r2 > 0);
}
/*
* Checks if center frequency of chan falls with in the bandwidth
* range of chandef.
*/
bool cfg80211_is_sub_chan(struct cfg80211_chan_def *chandef,
struct ieee80211_channel *chan)
{
int width;
u32 freq;
if (chandef->chan->center_freq == chan->center_freq)
return true;
width = cfg80211_chandef_get_width(chandef);
if (width <= 20)
return false;
for (freq = chandef->center_freq1 - width / 2 + 10;
freq <= chandef->center_freq1 + width / 2 - 10; freq += 20) {
if (chan->center_freq == freq)
return true;
}
if (!chandef->center_freq2)
return false;
for (freq = chandef->center_freq2 - width / 2 + 10;
freq <= chandef->center_freq2 + width / 2 - 10; freq += 20) {
if (chan->center_freq == freq)
return true;
}
return false;
}
bool cfg80211_beaconing_iface_active(struct wireless_dev *wdev)
{
bool active = false;
ASSERT_WDEV_LOCK(wdev);
if (!wdev->chandef.chan)
return false;
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
active = wdev->beacon_interval != 0;
break;
case NL80211_IFTYPE_ADHOC:
active = wdev->ssid_len != 0;
break;
case NL80211_IFTYPE_MESH_POINT:
active = wdev->mesh_id_len != 0;
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_P2P_DEVICE:
/* Can NAN type be considered as beaconing interface? */
case NL80211_IFTYPE_NAN:
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
WARN_ON(1);
}
return active;
}
static bool cfg80211_is_wiphy_oper_chan(struct wiphy *wiphy,
struct ieee80211_channel *chan)
{
struct wireless_dev *wdev;
list_for_each_entry(wdev, &wiphy->wdev_list, list) {
wdev_lock(wdev);
if (!cfg80211_beaconing_iface_active(wdev)) {
wdev_unlock(wdev);
continue;
}
if (cfg80211_is_sub_chan(&wdev->chandef, chan)) {
wdev_unlock(wdev);
return true;
}
wdev_unlock(wdev);
}
return false;
}
bool cfg80211_any_wiphy_oper_chan(struct wiphy *wiphy,
struct ieee80211_channel *chan)
{
struct cfg80211_registered_device *rdev;
ASSERT_RTNL();
if (!(chan->flags & IEEE80211_CHAN_RADAR))
return false;
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (!reg_dfs_domain_same(wiphy, &rdev->wiphy))
continue;
if (cfg80211_is_wiphy_oper_chan(&rdev->wiphy, chan))
return true;
}
return false;
}
static bool cfg80211_get_chans_dfs_available(struct wiphy *wiphy,
u32 center_freq,
u32 bandwidth)
{
struct ieee80211_channel *c;
u32 freq, start_freq, end_freq;
bool dfs_offload;
dfs_offload = wiphy_ext_feature_isset(wiphy,
NL80211_EXT_FEATURE_DFS_OFFLOAD);
start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
/*
* Check entire range of channels for the bandwidth.
* If any channel in between is disabled or has not
* had gone through CAC return false
*/
for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
c = ieee80211_get_channel_khz(wiphy, freq);
if (!c)
return false;
if (c->flags & IEEE80211_CHAN_DISABLED)
return false;
if ((c->flags & IEEE80211_CHAN_RADAR) &&
(c->dfs_state != NL80211_DFS_AVAILABLE) &&
!(c->dfs_state == NL80211_DFS_USABLE && dfs_offload))
return false;
}
return true;
}
static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef)
{
int width;
int r;
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return false;
width = cfg80211_chandef_get_width(chandef);
if (width < 0)
return false;
r = cfg80211_get_chans_dfs_available(wiphy,
MHZ_TO_KHZ(chandef->center_freq1),
width);
/* If any of channels unavailable for cf1 just return */
if (!r)
return r;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_80P80:
WARN_ON(!chandef->center_freq2);
r = cfg80211_get_chans_dfs_available(wiphy,
MHZ_TO_KHZ(chandef->center_freq2),
width);
break;
default:
WARN_ON(chandef->center_freq2);
break;
}
return r;
}
static unsigned int cfg80211_get_chans_dfs_cac_time(struct wiphy *wiphy,
u32 center_freq,
u32 bandwidth)
{
struct ieee80211_channel *c;
u32 start_freq, end_freq, freq;
unsigned int dfs_cac_ms = 0;
start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
c = ieee80211_get_channel_khz(wiphy, freq);
if (!c)
return 0;
if (c->flags & IEEE80211_CHAN_DISABLED)
return 0;
if (!(c->flags & IEEE80211_CHAN_RADAR))
continue;
if (c->dfs_cac_ms > dfs_cac_ms)
dfs_cac_ms = c->dfs_cac_ms;
}
return dfs_cac_ms;
}
unsigned int
cfg80211_chandef_dfs_cac_time(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef)
{
int width;
unsigned int t1 = 0, t2 = 0;
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return 0;
width = cfg80211_chandef_get_width(chandef);
if (width < 0)
return 0;
t1 = cfg80211_get_chans_dfs_cac_time(wiphy,
MHZ_TO_KHZ(chandef->center_freq1),
width);
if (!chandef->center_freq2)
return t1;
t2 = cfg80211_get_chans_dfs_cac_time(wiphy,
MHZ_TO_KHZ(chandef->center_freq2),
width);
return max(t1, t2);
}
static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
u32 center_freq, u32 bandwidth,
u32 prohibited_flags)
{
struct ieee80211_channel *c;
u32 freq, start_freq, end_freq;
start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
c = ieee80211_get_channel_khz(wiphy, freq);
if (!c || c->flags & prohibited_flags)
return false;
}
return true;
}
/* check if the operating channels are valid and supported */
static bool cfg80211_edmg_usable(struct wiphy *wiphy, u8 edmg_channels,
enum ieee80211_edmg_bw_config edmg_bw_config,
int primary_channel,
struct ieee80211_edmg *edmg_cap)
{
struct ieee80211_channel *chan;
int i, freq;
int channels_counter = 0;
if (!edmg_channels && !edmg_bw_config)
return true;
if ((!edmg_channels && edmg_bw_config) ||
(edmg_channels && !edmg_bw_config))
return false;
if (!(edmg_channels & BIT(primary_channel - 1)))
return false;
/* 60GHz channels 1..6 */
for (i = 0; i < 6; i++) {
if (!(edmg_channels & BIT(i)))
continue;
if (!(edmg_cap->channels & BIT(i)))
return false;
channels_counter++;
freq = ieee80211_channel_to_frequency(i + 1,
NL80211_BAND_60GHZ);
chan = ieee80211_get_channel(wiphy, freq);
if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
return false;
}
/* IEEE802.11 allows max 4 channels */
if (channels_counter > 4)
return false;
/* check bw_config is a subset of what driver supports
* (see IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13)
*/
if ((edmg_bw_config % 4) > (edmg_cap->bw_config % 4))
return false;
if (edmg_bw_config > edmg_cap->bw_config)
return false;
return true;
}
bool cfg80211_chandef_usable(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef,
u32 prohibited_flags)
{
struct ieee80211_sta_ht_cap *ht_cap;
struct ieee80211_sta_vht_cap *vht_cap;
struct ieee80211_edmg *edmg_cap;
u32 width, control_freq, cap;
bool support_80_80 = false;
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return false;
ht_cap = &wiphy->bands[chandef->chan->band]->ht_cap;
vht_cap = &wiphy->bands[chandef->chan->band]->vht_cap;
edmg_cap = &wiphy->bands[chandef->chan->band]->edmg_cap;
if (edmg_cap->channels &&
!cfg80211_edmg_usable(wiphy,
chandef->edmg.channels,
chandef->edmg.bw_config,
chandef->chan->hw_value,
edmg_cap))
return false;
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_1:
width = 1;
break;
case NL80211_CHAN_WIDTH_2:
width = 2;
break;
case NL80211_CHAN_WIDTH_4:
width = 4;
break;
case NL80211_CHAN_WIDTH_8:
width = 8;
break;
case NL80211_CHAN_WIDTH_16:
width = 16;
break;
case NL80211_CHAN_WIDTH_5:
width = 5;
break;
case NL80211_CHAN_WIDTH_10:
prohibited_flags |= IEEE80211_CHAN_NO_10MHZ;
width = 10;
break;
case NL80211_CHAN_WIDTH_20:
if (!ht_cap->ht_supported &&
chandef->chan->band != NL80211_BAND_6GHZ)
return false;
fallthrough;
case NL80211_CHAN_WIDTH_20_NOHT:
prohibited_flags |= IEEE80211_CHAN_NO_20MHZ;
width = 20;
break;
case NL80211_CHAN_WIDTH_40:
width = 40;
if (chandef->chan->band == NL80211_BAND_6GHZ)
break;
if (!ht_cap->ht_supported)
return false;
if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
return false;
if (chandef->center_freq1 < control_freq &&
chandef->chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
return false;
if (chandef->center_freq1 > control_freq &&
chandef->chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
return false;
break;
case NL80211_CHAN_WIDTH_80P80:
cap = vht_cap->cap;
support_80_80 =
(cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) ||
(cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) ||
u32_get_bits(cap, IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) > 1;
if (chandef->chan->band != NL80211_BAND_6GHZ && !support_80_80)
return false;
fallthrough;
case NL80211_CHAN_WIDTH_80:
prohibited_flags |= IEEE80211_CHAN_NO_80MHZ;
width = 80;
if (chandef->chan->band == NL80211_BAND_6GHZ)
break;
if (!vht_cap->vht_supported)
return false;
break;
case NL80211_CHAN_WIDTH_160:
prohibited_flags |= IEEE80211_CHAN_NO_160MHZ;
width = 160;
if (chandef->chan->band == NL80211_BAND_6GHZ)
break;
if (!vht_cap->vht_supported)
return false;
cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ &&
!(vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK))
return false;
break;
default:
WARN_ON_ONCE(1);
return false;
}
/*
* TODO: What if there are only certain 80/160/80+80 MHz channels
* allowed by the driver, or only certain combinations?
* For 40 MHz the driver can set the NO_HT40 flags, but for
* 80/160 MHz and in particular 80+80 MHz this isn't really
* feasible and we only have NO_80MHZ/NO_160MHZ so far but
* no way to cover 80+80 MHz or more complex restrictions.
* Note that such restrictions also need to be advertised to
* userspace, for example for P2P channel selection.
*/
if (width > 20)
prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
/* 5 and 10 MHz are only defined for the OFDM PHY */
if (width < 20)
prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
if (!cfg80211_secondary_chans_ok(wiphy,
ieee80211_chandef_to_khz(chandef),
width, prohibited_flags))
return false;
if (!chandef->center_freq2)
return true;
return cfg80211_secondary_chans_ok(wiphy,
MHZ_TO_KHZ(chandef->center_freq2),
width, prohibited_flags);
}
EXPORT_SYMBOL(cfg80211_chandef_usable);
/*
* Check if the channel can be used under permissive conditions mandated by
* some regulatory bodies, i.e., the channel is marked with
* IEEE80211_CHAN_IR_CONCURRENT and there is an additional station interface
* associated to an AP on the same channel or on the same UNII band
* (assuming that the AP is an authorized master).
* In addition allow operation on a channel on which indoor operation is
* allowed, iff we are currently operating in an indoor environment.
*/
static bool cfg80211_ir_permissive_chan(struct wiphy *wiphy,
enum nl80211_iftype iftype,
struct ieee80211_channel *chan)
{
struct wireless_dev *wdev;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
ASSERT_RTNL();
if (!IS_ENABLED(CONFIG_CFG80211_REG_RELAX_NO_IR) ||
!(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR))
return false;
/* only valid for GO and TDLS off-channel (station/p2p-CL) */
if (iftype != NL80211_IFTYPE_P2P_GO &&
iftype != NL80211_IFTYPE_STATION &&
iftype != NL80211_IFTYPE_P2P_CLIENT)
return false;
if (regulatory_indoor_allowed() &&
(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
return true;
if (!(chan->flags & IEEE80211_CHAN_IR_CONCURRENT))
return false;
/*
* Generally, it is possible to rely on another device/driver to allow
* the IR concurrent relaxation, however, since the device can further
* enforce the relaxation (by doing a similar verifications as this),
* and thus fail the GO instantiation, consider only the interfaces of
* the current registered device.
*/
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
struct ieee80211_channel *other_chan = NULL;
int r1, r2;
wdev_lock(wdev);
if (wdev->iftype == NL80211_IFTYPE_STATION &&
wdev->current_bss)
other_chan = wdev->current_bss->pub.channel;
/*
* If a GO already operates on the same GO_CONCURRENT channel,
* this one (maybe the same one) can beacon as well. We allow
* the operation even if the station we relied on with
* GO_CONCURRENT is disconnected now. But then we must make sure
* we're not outdoor on an indoor-only channel.
*/
if (iftype == NL80211_IFTYPE_P2P_GO &&
wdev->iftype == NL80211_IFTYPE_P2P_GO &&
wdev->beacon_interval &&
!(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
other_chan = wdev->chandef.chan;
wdev_unlock(wdev);
if (!other_chan)
continue;
if (chan == other_chan)
return true;
if (chan->band != NL80211_BAND_5GHZ &&
chan->band != NL80211_BAND_6GHZ)
continue;
r1 = cfg80211_get_unii(chan->center_freq);
r2 = cfg80211_get_unii(other_chan->center_freq);
if (r1 != -EINVAL && r1 == r2) {
/*
* At some locations channels 149-165 are considered a
* bundle, but at other locations, e.g., Indonesia,
* channels 149-161 are considered a bundle while
* channel 165 is left out and considered to be in a
* different bundle. Thus, in case that there is a
* station interface connected to an AP on channel 165,
* it is assumed that channels 149-161 are allowed for
* GO operations. However, having a station interface
* connected to an AP on channels 149-161, does not
* allow GO operation on channel 165.
*/
if (chan->center_freq == 5825 &&
other_chan->center_freq != 5825)
continue;
return true;
}
}
return false;
}
static bool _cfg80211_reg_can_beacon(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef,
enum nl80211_iftype iftype,
bool check_no_ir)
{
bool res;
u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_RADAR;
trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
if (check_no_ir)
prohibited_flags |= IEEE80211_CHAN_NO_IR;
if (cfg80211_chandef_dfs_required(wiphy, chandef, iftype) > 0 &&
cfg80211_chandef_dfs_available(wiphy, chandef)) {
/* We can skip IEEE80211_CHAN_NO_IR if chandef dfs available */
prohibited_flags = IEEE80211_CHAN_DISABLED;
}
res = cfg80211_chandef_usable(wiphy, chandef, prohibited_flags);
trace_cfg80211_return_bool(res);
return res;
}
bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef,
enum nl80211_iftype iftype)
{
return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, true);
}
EXPORT_SYMBOL(cfg80211_reg_can_beacon);
bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef,
enum nl80211_iftype iftype)
{
bool check_no_ir;
ASSERT_RTNL();
/*
* Under certain conditions suggested by some regulatory bodies a
* GO/STA can IR on channels marked with IEEE80211_NO_IR. Set this flag
* only if such relaxations are not enabled and the conditions are not
* met.
*/
check_no_ir = !cfg80211_ir_permissive_chan(wiphy, iftype,
chandef->chan);
return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
}
EXPORT_SYMBOL(cfg80211_reg_can_beacon_relax);
int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
struct cfg80211_chan_def *chandef)
{
if (!rdev->ops->set_monitor_channel)
return -EOPNOTSUPP;
if (!cfg80211_has_monitors_only(rdev))
return -EBUSY;
return rdev_set_monitor_channel(rdev, chandef);
}
void
cfg80211_get_chan_state(struct wireless_dev *wdev,
struct ieee80211_channel **chan,
enum cfg80211_chan_mode *chanmode,
u8 *radar_detect)
{
int ret;
*chan = NULL;
*chanmode = CHAN_MODE_UNDEFINED;
ASSERT_WDEV_LOCK(wdev);
if (wdev->netdev && !netif_running(wdev->netdev))
return;
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
if (wdev->current_bss) {
*chan = wdev->current_bss->pub.channel;
*chanmode = (wdev->ibss_fixed &&
!wdev->ibss_dfs_possible)
? CHAN_MODE_SHARED
: CHAN_MODE_EXCLUSIVE;
/* consider worst-case - IBSS can try to return to the
* original user-specified channel as creator */
if (wdev->ibss_dfs_possible)
*radar_detect |= BIT(wdev->chandef.width);
return;
}
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
if (wdev->current_bss) {
*chan = wdev->current_bss->pub.channel;
*chanmode = CHAN_MODE_SHARED;
return;
}
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
if (wdev->cac_started) {
*chan = wdev->chandef.chan;
*chanmode = CHAN_MODE_SHARED;
*radar_detect |= BIT(wdev->chandef.width);
} else if (wdev->beacon_interval) {
*chan = wdev->chandef.chan;
*chanmode = CHAN_MODE_SHARED;
ret = cfg80211_chandef_dfs_required(wdev->wiphy,
&wdev->chandef,
wdev->iftype);
WARN_ON(ret < 0);
if (ret > 0)
*radar_detect |= BIT(wdev->chandef.width);
}
return;
case NL80211_IFTYPE_MESH_POINT:
if (wdev->mesh_id_len) {
*chan = wdev->chandef.chan;
*chanmode = CHAN_MODE_SHARED;
ret = cfg80211_chandef_dfs_required(wdev->wiphy,
&wdev->chandef,
wdev->iftype);
WARN_ON(ret < 0);
if (ret > 0)
*radar_detect |= BIT(wdev->chandef.width);
}
return;
case NL80211_IFTYPE_OCB:
if (wdev->chandef.chan) {
*chan = wdev->chandef.chan;
*chanmode = CHAN_MODE_SHARED;
return;
}
break;
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_NAN:
/* these interface types don't really have a channel */
return;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
WARN_ON(1);
}
}