linux/arch/arm/mach-davinci
Sandeep Paulraj 7307d093e6 DaVinci: DM365: Changing default queue for DM365.
In DM365 Q0, Q1 and Q2 are used by codecs.
LSP drivers should use Q3.
This patch changes the default queue for DM365.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04 13:29:54 -08:00
..
include/mach TI Davinci EMAC : Re-use driver for other platforms. 2010-02-04 13:29:50 -08:00
board-da830-evm.c davinci: da8xx/omapl1: add support for the second sysconfig module 2010-02-04 13:29:32 -08:00
board-da850-evm.c davinci: da850/omap-l138: Enable 4-bit ecc 2010-02-04 13:29:49 -08:00
board-dm355-evm.c Davinci VPFE Capture: Take i2c adapter id through platform data 2010-01-06 08:57:43 -08:00
board-dm355-leopard.c DaVinci: rename setup_usb() to davinci_setup_usb() 2009-11-25 10:21:33 -08:00
board-dm365-evm.c DaVinci - Adding platform & board changes for vpfe capture on DM365 2010-02-04 13:28:46 -08:00
board-dm644x-evm.c Davinci VPFE Capture: Take i2c adapter id through platform data 2010-01-06 08:57:43 -08:00
board-dm646x-evm.c davinci: add support for DM6467T EVM 2010-02-04 13:29:44 -08:00
board-neuros-osd2.c davinci: Initial support for Neuros OSD2 platform. 2009-11-25 10:21:39 -08:00
board-sffsdr.c davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c 2009-11-25 10:21:38 -08:00
clock.c davinci: clock: Check CLK_PSC flag before disabling PSC 2010-02-04 13:29:53 -08:00
clock.h davinci: make it possible to include clock.h and psc.h in assembly code 2010-02-04 13:29:37 -08:00
common.c TI Davinci EMAC : Re-use driver for other platforms. 2010-02-04 13:29:50 -08:00
cp_intc.c davinci: cp_intc: provide set_wake function 2010-01-06 08:57:44 -08:00
cpufreq.c davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator 2009-11-25 10:21:37 -08:00
cpuidle.c davinci: cpuidle: move mapping of DDR2 controller registers out of driver 2010-02-04 13:29:38 -08:00
da830.c davinci: da8xx/omapl1: add support for the second sysconfig module 2010-02-04 13:29:32 -08:00
da850.c davinci: da850/omap-l138: create static map for SRAM 2010-02-04 13:29:40 -08:00
devices-da8xx.c davinci: cpuidle: move mapping of DDR2 controller registers out of driver 2010-02-04 13:29:38 -08:00
devices.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
dm355.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
dm365.c DaVinci: DM365: Changing default queue for DM365. 2010-02-04 13:29:54 -08:00
dm644x.c davinci: Initial support for Neuros OSD2 platform. 2009-11-25 10:21:39 -08:00
dm646x.c davinci: add support for DM6467T EVM 2010-02-04 13:29:44 -08:00
dma.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
gpio.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
io.c davinci: Encapsulate SoC-specific data in a structure 2009-05-26 08:14:04 -07:00
irq.c davinci: Move interrupt ctlr info to SoC infrastructure 2009-05-26 08:18:09 -07:00
Kconfig davinci: add support for DM6467T EVM 2010-02-04 13:29:44 -08:00
Makefile davinci: Initial support for Neuros OSD2 platform. 2009-11-25 10:21:39 -08:00
Makefile.boot davinci: da8xx: Add base DA830/OMAP-L137 SoC support 2009-08-26 10:56:59 +03:00
mux.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
mux.h davinci: update pin-multiplexing support 2009-04-27 09:49:46 -07:00
psc.c davinci: move PSC register definitions from psc.c to psc.h 2010-02-04 13:29:36 -08:00
serial.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
sram.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
time.c DaVinci: remove unneeded #include's 2009-11-25 10:21:31 -08:00
usb.c DA8xx: MUSB platform device registration 2009-11-25 10:21:33 -08:00