mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
7b9d9d8815
This patch sets the led_classdev max_brightness to the maximum level value supported by hardware. This allows to get rid of the brightness conversion operation (from software [0:LED_FULL] to hardware ranges) in brightness_set(). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
595 lines
14 KiB
C
595 lines
14 KiB
C
/*
|
|
* leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs
|
|
*
|
|
* Copyright (C) 2010 LaCie
|
|
*
|
|
* Author: Simon Guinot <sguinot@lacie.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/platform_data/leds-kirkwood-netxbig.h>
|
|
|
|
/*
|
|
* GPIO extension bus.
|
|
*/
|
|
|
|
static DEFINE_SPINLOCK(gpio_ext_lock);
|
|
|
|
static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr)
|
|
{
|
|
int pin;
|
|
|
|
for (pin = 0; pin < gpio_ext->num_addr; pin++)
|
|
gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1);
|
|
}
|
|
|
|
static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data)
|
|
{
|
|
int pin;
|
|
|
|
for (pin = 0; pin < gpio_ext->num_data; pin++)
|
|
gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1);
|
|
}
|
|
|
|
static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext)
|
|
{
|
|
/* Enable select is done on the raising edge. */
|
|
gpio_set_value(gpio_ext->enable, 0);
|
|
gpio_set_value(gpio_ext->enable, 1);
|
|
}
|
|
|
|
static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
|
|
int addr, int value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio_ext_lock, flags);
|
|
gpio_ext_set_addr(gpio_ext, addr);
|
|
gpio_ext_set_data(gpio_ext, value);
|
|
gpio_ext_enable_select(gpio_ext);
|
|
spin_unlock_irqrestore(&gpio_ext_lock, flags);
|
|
}
|
|
|
|
static int gpio_ext_init(struct platform_device *pdev,
|
|
struct netxbig_gpio_ext *gpio_ext)
|
|
{
|
|
int err;
|
|
int i;
|
|
|
|
if (unlikely(!gpio_ext))
|
|
return -EINVAL;
|
|
|
|
/* Configure address GPIOs. */
|
|
for (i = 0; i < gpio_ext->num_addr; i++) {
|
|
err = devm_gpio_request_one(&pdev->dev, gpio_ext->addr[i],
|
|
GPIOF_OUT_INIT_LOW,
|
|
"GPIO extension addr");
|
|
if (err)
|
|
return err;
|
|
}
|
|
/* Configure data GPIOs. */
|
|
for (i = 0; i < gpio_ext->num_data; i++) {
|
|
err = devm_gpio_request_one(&pdev->dev, gpio_ext->data[i],
|
|
GPIOF_OUT_INIT_LOW,
|
|
"GPIO extension data");
|
|
if (err)
|
|
return err;
|
|
}
|
|
/* Configure "enable select" GPIO. */
|
|
err = devm_gpio_request_one(&pdev->dev, gpio_ext->enable,
|
|
GPIOF_OUT_INIT_LOW,
|
|
"GPIO extension enable");
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Class LED driver.
|
|
*/
|
|
|
|
struct netxbig_led_data {
|
|
struct netxbig_gpio_ext *gpio_ext;
|
|
struct led_classdev cdev;
|
|
int mode_addr;
|
|
int *mode_val;
|
|
int bright_addr;
|
|
struct netxbig_led_timer *timer;
|
|
int num_timer;
|
|
enum netxbig_led_mode mode;
|
|
int sata;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
|
|
unsigned long delay_on,
|
|
unsigned long delay_off,
|
|
struct netxbig_led_timer *timer,
|
|
int num_timer)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < num_timer; i++) {
|
|
if (timer[i].delay_on == delay_on &&
|
|
timer[i].delay_off == delay_off) {
|
|
*mode = timer[i].mode;
|
|
return 0;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int netxbig_led_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on,
|
|
unsigned long *delay_off)
|
|
{
|
|
struct netxbig_led_data *led_dat =
|
|
container_of(led_cdev, struct netxbig_led_data, cdev);
|
|
enum netxbig_led_mode mode;
|
|
int mode_val;
|
|
int ret;
|
|
|
|
/* Look for a LED mode with the requested timer frequency. */
|
|
ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off,
|
|
led_dat->timer, led_dat->num_timer);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mode_val = led_dat->mode_val[mode];
|
|
if (mode_val == NETXBIG_LED_INVALID_MODE)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irq(&led_dat->lock);
|
|
|
|
gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
|
|
led_dat->mode = mode;
|
|
|
|
spin_unlock_irq(&led_dat->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void netxbig_led_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct netxbig_led_data *led_dat =
|
|
container_of(led_cdev, struct netxbig_led_data, cdev);
|
|
enum netxbig_led_mode mode;
|
|
int mode_val;
|
|
int set_brightness = 1;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&led_dat->lock, flags);
|
|
|
|
if (value == LED_OFF) {
|
|
mode = NETXBIG_LED_OFF;
|
|
set_brightness = 0;
|
|
} else {
|
|
if (led_dat->sata)
|
|
mode = NETXBIG_LED_SATA;
|
|
else if (led_dat->mode == NETXBIG_LED_OFF)
|
|
mode = NETXBIG_LED_ON;
|
|
else /* Keep 'timer' mode. */
|
|
mode = led_dat->mode;
|
|
}
|
|
mode_val = led_dat->mode_val[mode];
|
|
|
|
gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
|
|
led_dat->mode = mode;
|
|
/*
|
|
* Note that the brightness register is shared between all the
|
|
* SATA LEDs. So, change the brightness setting for a single
|
|
* SATA LED will affect all the others.
|
|
*/
|
|
if (set_brightness)
|
|
gpio_ext_set_value(led_dat->gpio_ext,
|
|
led_dat->bright_addr, value);
|
|
|
|
spin_unlock_irqrestore(&led_dat->lock, flags);
|
|
}
|
|
|
|
static ssize_t netxbig_led_sata_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buff, size_t count)
|
|
{
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
struct netxbig_led_data *led_dat =
|
|
container_of(led_cdev, struct netxbig_led_data, cdev);
|
|
unsigned long enable;
|
|
enum netxbig_led_mode mode;
|
|
int mode_val;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buff, 10, &enable);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
enable = !!enable;
|
|
|
|
spin_lock_irq(&led_dat->lock);
|
|
|
|
if (led_dat->sata == enable) {
|
|
ret = count;
|
|
goto exit_unlock;
|
|
}
|
|
|
|
if (led_dat->mode != NETXBIG_LED_ON &&
|
|
led_dat->mode != NETXBIG_LED_SATA)
|
|
mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */
|
|
else if (enable)
|
|
mode = NETXBIG_LED_SATA;
|
|
else
|
|
mode = NETXBIG_LED_ON;
|
|
|
|
mode_val = led_dat->mode_val[mode];
|
|
if (mode_val == NETXBIG_LED_INVALID_MODE) {
|
|
ret = -EINVAL;
|
|
goto exit_unlock;
|
|
}
|
|
|
|
gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
|
|
led_dat->mode = mode;
|
|
led_dat->sata = enable;
|
|
|
|
ret = count;
|
|
|
|
exit_unlock:
|
|
spin_unlock_irq(&led_dat->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t netxbig_led_sata_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
struct netxbig_led_data *led_dat =
|
|
container_of(led_cdev, struct netxbig_led_data, cdev);
|
|
|
|
return sprintf(buf, "%d\n", led_dat->sata);
|
|
}
|
|
|
|
static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store);
|
|
|
|
static struct attribute *netxbig_led_attrs[] = {
|
|
&dev_attr_sata.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(netxbig_led);
|
|
|
|
static int create_netxbig_led(struct platform_device *pdev,
|
|
struct netxbig_led_platform_data *pdata,
|
|
struct netxbig_led_data *led_dat,
|
|
const struct netxbig_led *template)
|
|
{
|
|
spin_lock_init(&led_dat->lock);
|
|
led_dat->gpio_ext = pdata->gpio_ext;
|
|
led_dat->cdev.name = template->name;
|
|
led_dat->cdev.default_trigger = template->default_trigger;
|
|
led_dat->cdev.blink_set = netxbig_led_blink_set;
|
|
led_dat->cdev.brightness_set = netxbig_led_set;
|
|
/*
|
|
* Because the GPIO extension bus don't allow to read registers
|
|
* value, there is no way to probe the LED initial state.
|
|
* So, the initial sysfs LED value for the "brightness" and "sata"
|
|
* attributes are inconsistent.
|
|
*
|
|
* Note that the initial LED state can't be reconfigured.
|
|
* The reason is that the LED behaviour must stay uniform during
|
|
* the whole boot process (bootloader+linux).
|
|
*/
|
|
led_dat->sata = 0;
|
|
led_dat->cdev.brightness = LED_OFF;
|
|
led_dat->cdev.max_brightness = template->bright_max;
|
|
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
|
|
led_dat->mode_addr = template->mode_addr;
|
|
led_dat->mode_val = template->mode_val;
|
|
led_dat->bright_addr = template->bright_addr;
|
|
led_dat->timer = pdata->timer;
|
|
led_dat->num_timer = pdata->num_timer;
|
|
/*
|
|
* If available, expose the SATA activity blink capability through
|
|
* a "sata" sysfs attribute.
|
|
*/
|
|
if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
|
|
led_dat->cdev.groups = netxbig_led_groups;
|
|
|
|
return devm_led_classdev_register(&pdev->dev, &led_dat->cdev);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_GPIO
|
|
static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
|
|
struct netxbig_gpio_ext *gpio_ext)
|
|
{
|
|
int *addr, *data;
|
|
int num_addr, num_data;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = of_gpio_named_count(np, "addr-gpios");
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"Failed to count GPIOs in DT property addr-gpios\n");
|
|
return ret;
|
|
}
|
|
num_addr = ret;
|
|
addr = devm_kzalloc(dev, num_addr * sizeof(*addr), GFP_KERNEL);
|
|
if (!addr)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_addr; i++) {
|
|
ret = of_get_named_gpio(np, "addr-gpios", i);
|
|
if (ret < 0)
|
|
return ret;
|
|
addr[i] = ret;
|
|
}
|
|
gpio_ext->addr = addr;
|
|
gpio_ext->num_addr = num_addr;
|
|
|
|
ret = of_gpio_named_count(np, "data-gpios");
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"Failed to count GPIOs in DT property data-gpios\n");
|
|
return ret;
|
|
}
|
|
num_data = ret;
|
|
data = devm_kzalloc(dev, num_data * sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_data; i++) {
|
|
ret = of_get_named_gpio(np, "data-gpios", i);
|
|
if (ret < 0)
|
|
return ret;
|
|
data[i] = ret;
|
|
}
|
|
gpio_ext->data = data;
|
|
gpio_ext->num_data = num_data;
|
|
|
|
ret = of_get_named_gpio(np, "enable-gpio", 0);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"Failed to get GPIO from DT property enable-gpio\n");
|
|
return ret;
|
|
}
|
|
gpio_ext->enable = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netxbig_leds_get_of_pdata(struct device *dev,
|
|
struct netxbig_led_platform_data *pdata)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
struct device_node *gpio_ext_np;
|
|
struct device_node *child;
|
|
struct netxbig_gpio_ext *gpio_ext;
|
|
struct netxbig_led_timer *timers;
|
|
struct netxbig_led *leds, *led;
|
|
int num_timers;
|
|
int num_leds = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
/* GPIO extension */
|
|
gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0);
|
|
if (!gpio_ext_np) {
|
|
dev_err(dev, "Failed to get DT handle gpio-ext\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL);
|
|
if (!gpio_ext)
|
|
return -ENOMEM;
|
|
ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
|
|
if (ret)
|
|
return ret;
|
|
of_node_put(gpio_ext_np);
|
|
pdata->gpio_ext = gpio_ext;
|
|
|
|
/* Timers (optional) */
|
|
ret = of_property_count_u32_elems(np, "timers");
|
|
if (ret > 0) {
|
|
if (ret % 3)
|
|
return -EINVAL;
|
|
num_timers = ret / 3;
|
|
timers = devm_kzalloc(dev, num_timers * sizeof(*timers),
|
|
GFP_KERNEL);
|
|
if (!timers)
|
|
return -ENOMEM;
|
|
for (i = 0; i < num_timers; i++) {
|
|
u32 tmp;
|
|
|
|
of_property_read_u32_index(np, "timers", 3 * i,
|
|
&timers[i].mode);
|
|
if (timers[i].mode >= NETXBIG_LED_MODE_NUM)
|
|
return -EINVAL;
|
|
of_property_read_u32_index(np, "timers",
|
|
3 * i + 1, &tmp);
|
|
timers[i].delay_on = tmp;
|
|
of_property_read_u32_index(np, "timers",
|
|
3 * i + 2, &tmp);
|
|
timers[i].delay_off = tmp;
|
|
}
|
|
pdata->timer = timers;
|
|
pdata->num_timer = num_timers;
|
|
}
|
|
|
|
/* LEDs */
|
|
num_leds = of_get_child_count(np);
|
|
if (!num_leds) {
|
|
dev_err(dev, "No LED subnodes found in DT\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
leds = devm_kzalloc(dev, num_leds * sizeof(*leds), GFP_KERNEL);
|
|
if (!leds)
|
|
return -ENOMEM;
|
|
|
|
led = leds;
|
|
for_each_child_of_node(np, child) {
|
|
const char *string;
|
|
int *mode_val;
|
|
int num_modes;
|
|
|
|
ret = of_property_read_u32(child, "mode-addr",
|
|
&led->mode_addr);
|
|
if (ret)
|
|
goto err_node_put;
|
|
|
|
ret = of_property_read_u32(child, "bright-addr",
|
|
&led->bright_addr);
|
|
if (ret)
|
|
goto err_node_put;
|
|
|
|
ret = of_property_read_u32(child, "max-brightness",
|
|
&led->bright_max);
|
|
if (ret)
|
|
goto err_node_put;
|
|
|
|
mode_val =
|
|
devm_kzalloc(dev,
|
|
NETXBIG_LED_MODE_NUM * sizeof(*mode_val),
|
|
GFP_KERNEL);
|
|
if (!mode_val) {
|
|
ret = -ENOMEM;
|
|
goto err_node_put;
|
|
}
|
|
|
|
for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
|
|
mode_val[i] = NETXBIG_LED_INVALID_MODE;
|
|
|
|
ret = of_property_count_u32_elems(child, "mode-val");
|
|
if (ret < 0 || ret % 2) {
|
|
ret = -EINVAL;
|
|
goto err_node_put;
|
|
}
|
|
num_modes = ret / 2;
|
|
if (num_modes > NETXBIG_LED_MODE_NUM) {
|
|
ret = -EINVAL;
|
|
goto err_node_put;
|
|
}
|
|
|
|
for (i = 0; i < num_modes; i++) {
|
|
int mode;
|
|
int val;
|
|
|
|
of_property_read_u32_index(child,
|
|
"mode-val", 2 * i, &mode);
|
|
of_property_read_u32_index(child,
|
|
"mode-val", 2 * i + 1, &val);
|
|
if (mode >= NETXBIG_LED_MODE_NUM) {
|
|
ret = -EINVAL;
|
|
goto err_node_put;
|
|
}
|
|
mode_val[mode] = val;
|
|
}
|
|
led->mode_val = mode_val;
|
|
|
|
if (!of_property_read_string(child, "label", &string))
|
|
led->name = string;
|
|
else
|
|
led->name = child->name;
|
|
|
|
if (!of_property_read_string(child,
|
|
"linux,default-trigger", &string))
|
|
led->default_trigger = string;
|
|
|
|
led++;
|
|
}
|
|
|
|
pdata->leds = leds;
|
|
pdata->num_leds = num_leds;
|
|
|
|
return 0;
|
|
|
|
err_node_put:
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id of_netxbig_leds_match[] = {
|
|
{ .compatible = "lacie,netxbig-leds", },
|
|
{},
|
|
};
|
|
#else
|
|
static inline int
|
|
netxbig_leds_get_of_pdata(struct device *dev,
|
|
struct netxbig_led_platform_data *pdata)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif /* CONFIG_OF_GPIO */
|
|
|
|
static int netxbig_led_probe(struct platform_device *pdev)
|
|
{
|
|
struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct netxbig_led_data *leds_data;
|
|
int i;
|
|
int ret;
|
|
|
|
if (!pdata) {
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
leds_data = devm_kzalloc(&pdev->dev,
|
|
pdata->num_leds * sizeof(*leds_data),
|
|
GFP_KERNEL);
|
|
if (!leds_data)
|
|
return -ENOMEM;
|
|
|
|
ret = gpio_ext_init(pdev, pdata->gpio_ext);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < pdata->num_leds; i++) {
|
|
ret = create_netxbig_led(pdev, pdata,
|
|
&leds_data[i], &pdata->leds[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver netxbig_led_driver = {
|
|
.probe = netxbig_led_probe,
|
|
.driver = {
|
|
.name = "leds-netxbig",
|
|
.of_match_table = of_match_ptr(of_netxbig_leds_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(netxbig_led_driver);
|
|
|
|
MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
|
|
MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:leds-netxbig");
|