linux/arch/ia64/kernel/pal.S
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

307 lines
7.7 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
/*
* PAL Firmware support
* IA-64 Processor Programmers Reference Vol 2
*
* Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
* Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
* Copyright (C) 1999-2001, 2003 Hewlett-Packard Co
* David Mosberger <davidm@hpl.hp.com>
* Stephane Eranian <eranian@hpl.hp.com>
*
* 05/22/2000 eranian Added support for stacked register calls
* 05/24/2000 eranian Added support for physical mode static calls
*/
#include <asm/asmmacro.h>
#include <asm/processor.h>
#include <asm/export.h>
.data
pal_entry_point:
data8 ia64_pal_default_handler
.text
/*
* Set the PAL entry point address. This could be written in C code, but we
* do it here to keep it all in one module (besides, it's so trivial that it's
* not a big deal).
*
* in0 Address of the PAL entry point (text address, NOT a function
* descriptor).
*/
GLOBAL_ENTRY(ia64_pal_handler_init)
alloc r3=ar.pfs,1,0,0,0
movl r2=pal_entry_point
;;
st8 [r2]=in0
br.ret.sptk.many rp
END(ia64_pal_handler_init)
/*
* Default PAL call handler. This needs to be coded in assembly because it
* uses the static calling convention, i.e., the RSE may not be used and
* calls are done via "br.cond" (not "br.call").
*/
GLOBAL_ENTRY(ia64_pal_default_handler)
mov r8=-1
br.cond.sptk.many rp
END(ia64_pal_default_handler)
/*
* Make a PAL call using the static calling convention.
*
* in0 Index of PAL service
* in1 - in3 Remaining PAL arguments
*/
GLOBAL_ENTRY(ia64_pal_call_static)
.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(4)
alloc loc1 = ar.pfs,4,5,0,0
movl loc2 = pal_entry_point
1: {
mov r28 = in0
mov r29 = in1
mov r8 = ip
}
;;
ld8 loc2 = [loc2] // loc2 <- entry point
adds r8 = 1f-1b,r8
mov loc4=ar.rsc // save RSE configuration
;;
mov ar.rsc=0 // put RSE in enforced lazy, LE mode
mov loc3 = psr
mov loc0 = rp
.body
mov r30 = in2
mov r31 = in3
mov b7 = loc2
rsm psr.i
;;
mov rp = r8
br.cond.sptk.many b7
1: mov psr.l = loc3
mov ar.rsc = loc4 // restore RSE configuration
mov ar.pfs = loc1
mov rp = loc0
;;
srlz.d // seralize restoration of psr.l
br.ret.sptk.many b0
END(ia64_pal_call_static)
EXPORT_SYMBOL(ia64_pal_call_static)
/*
* Make a PAL call using the stacked registers calling convention.
*
* Inputs:
* in0 Index of PAL service
* in2 - in3 Remaining PAL arguments
*/
GLOBAL_ENTRY(ia64_pal_call_stacked)
.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(4)
alloc loc1 = ar.pfs,4,4,4,0
movl loc2 = pal_entry_point
mov r28 = in0 // Index MUST be copied to r28
mov out0 = in0 // AND in0 of PAL function
mov loc0 = rp
.body
;;
ld8 loc2 = [loc2] // loc2 <- entry point
mov out1 = in1
mov out2 = in2
mov out3 = in3
mov loc3 = psr
;;
rsm psr.i
mov b7 = loc2
;;
br.call.sptk.many rp=b7 // now make the call
.ret0: mov psr.l = loc3
mov ar.pfs = loc1
mov rp = loc0
;;
srlz.d // serialize restoration of psr.l
br.ret.sptk.many b0
END(ia64_pal_call_stacked)
EXPORT_SYMBOL(ia64_pal_call_stacked)
/*
* Make a physical mode PAL call using the static registers calling convention.
*
* Inputs:
* in0 Index of PAL service
* in2 - in3 Remaining PAL arguments
*
* PSR_LP, PSR_TB, PSR_ID, PSR_DA are never set by the kernel.
* So we don't need to clear them.
*/
#define PAL_PSR_BITS_TO_CLEAR \
(IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_DB | IA64_PSR_RT |\
IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED | \
IA64_PSR_DFL | IA64_PSR_DFH)
#define PAL_PSR_BITS_TO_SET \
(IA64_PSR_BN)
GLOBAL_ENTRY(ia64_pal_call_phys_static)
.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(4)
alloc loc1 = ar.pfs,4,7,0,0
movl loc2 = pal_entry_point
1: {
mov r28 = in0 // copy procedure index
mov r8 = ip // save ip to compute branch
mov loc0 = rp // save rp
}
.body
;;
ld8 loc2 = [loc2] // loc2 <- entry point
mov r29 = in1 // first argument
mov r30 = in2 // copy arg2
mov r31 = in3 // copy arg3
;;
mov loc3 = psr // save psr
adds r8 = 1f-1b,r8 // calculate return address for call
;;
mov loc4=ar.rsc // save RSE configuration
dep.z loc2=loc2,0,61 // convert pal entry point to physical
tpa r8=r8 // convert rp to physical
;;
mov b7 = loc2 // install target to branch reg
mov ar.rsc=0 // put RSE in enforced lazy, LE mode
movl r16=PAL_PSR_BITS_TO_CLEAR
movl r17=PAL_PSR_BITS_TO_SET
;;
or loc3=loc3,r17 // add in psr the bits to set
;;
andcm r16=loc3,r16 // removes bits to clear from psr
br.call.sptk.many rp=ia64_switch_mode_phys
mov rp = r8 // install return address (physical)
mov loc5 = r19
mov loc6 = r20
br.cond.sptk.many b7
1:
mov ar.rsc=0 // put RSE in enforced lazy, LE mode
mov r16=loc3 // r16= original psr
mov r19=loc5
mov r20=loc6
br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode
mov psr.l = loc3 // restore init PSR
mov ar.pfs = loc1
mov rp = loc0
;;
mov ar.rsc=loc4 // restore RSE configuration
srlz.d // seralize restoration of psr.l
br.ret.sptk.many b0
END(ia64_pal_call_phys_static)
EXPORT_SYMBOL(ia64_pal_call_phys_static)
/*
* Make a PAL call using the stacked registers in physical mode.
*
* Inputs:
* in0 Index of PAL service
* in2 - in3 Remaining PAL arguments
*/
GLOBAL_ENTRY(ia64_pal_call_phys_stacked)
.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(5)
alloc loc1 = ar.pfs,5,7,4,0
movl loc2 = pal_entry_point
1: {
mov r28 = in0 // copy procedure index
mov loc0 = rp // save rp
}
.body
;;
ld8 loc2 = [loc2] // loc2 <- entry point
mov loc3 = psr // save psr
;;
mov loc4=ar.rsc // save RSE configuration
dep.z loc2=loc2,0,61 // convert pal entry point to physical
;;
mov ar.rsc=0 // put RSE in enforced lazy, LE mode
movl r16=PAL_PSR_BITS_TO_CLEAR
movl r17=PAL_PSR_BITS_TO_SET
;;
or loc3=loc3,r17 // add in psr the bits to set
mov b7 = loc2 // install target to branch reg
;;
andcm r16=loc3,r16 // removes bits to clear from psr
br.call.sptk.many rp=ia64_switch_mode_phys
mov out0 = in0 // first argument
mov out1 = in1 // copy arg2
mov out2 = in2 // copy arg3
mov out3 = in3 // copy arg3
mov loc5 = r19
mov loc6 = r20
br.call.sptk.many rp=b7 // now make the call
mov ar.rsc=0 // put RSE in enforced lazy, LE mode
mov r16=loc3 // r16= original psr
mov r19=loc5
mov r20=loc6
br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode
mov psr.l = loc3 // restore init PSR
mov ar.pfs = loc1
mov rp = loc0
;;
mov ar.rsc=loc4 // restore RSE configuration
srlz.d // seralize restoration of psr.l
br.ret.sptk.many b0
END(ia64_pal_call_phys_stacked)
EXPORT_SYMBOL(ia64_pal_call_phys_stacked)
/*
* Save scratch fp scratch regs which aren't saved in pt_regs already
* (fp10-fp15).
*
* NOTE: We need to do this since firmware (SAL and PAL) may use any of the
* scratch regs fp-low partition.
*
* Inputs:
* in0 Address of stack storage for fp regs
*/
GLOBAL_ENTRY(ia64_save_scratch_fpregs)
alloc r3=ar.pfs,1,0,0,0
add r2=16,in0
;;
stf.spill [in0] = f10,32
stf.spill [r2] = f11,32
;;
stf.spill [in0] = f12,32
stf.spill [r2] = f13,32
;;
stf.spill [in0] = f14,32
stf.spill [r2] = f15,32
br.ret.sptk.many rp
END(ia64_save_scratch_fpregs)
EXPORT_SYMBOL(ia64_save_scratch_fpregs)
/*
* Load scratch fp scratch regs (fp10-fp15)
*
* Inputs:
* in0 Address of stack storage for fp regs
*/
GLOBAL_ENTRY(ia64_load_scratch_fpregs)
alloc r3=ar.pfs,1,0,0,0
add r2=16,in0
;;
ldf.fill f10 = [in0],32
ldf.fill f11 = [r2],32
;;
ldf.fill f12 = [in0],32
ldf.fill f13 = [r2],32
;;
ldf.fill f14 = [in0],32
ldf.fill f15 = [r2],32
br.ret.sptk.many rp
END(ia64_load_scratch_fpregs)
EXPORT_SYMBOL(ia64_load_scratch_fpregs)