linux/sound/firewire/Kconfig
Takashi Sakamoto 6d5a2dda9b ALSA: firewire-motu: add support for MOTU 896 mk3 FireWire and Hybrid
Mark of the Unicorn released 896 mk3 FireWire in 2008 as part of the third
generation of its FireWire series. In 2011, 896 mk3 hybrid was released to
support USB protocol.

It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in optical interfaces. The model supports
transmission of PCM frames as well as MIDI messages.

The 896 mk3 FireWire consists of below ICs:

 * Texas Instruments TSB41AB2
 * Xilinx Spartan-3A FPGA, XC3S500E
 * Texas Instruments TMS320C6722
 * Microchip (Atmel) AT91SAM SAM7S256

It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in two pairs of optical interfaces. The model
supports transmission of PCM frames, while has no port for MIDi messages.

The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.

This commit adds support for it. The 896 mk3 FireWire is just tested, but
the 896 mk3 Hybrid is not yet.

$ config-rom-pretty-printer < motu-896mk3fw.img
               ROM header and bus information block
               -----------------------------------------------------------------
1024  04100ce1  bus_info_length 4, crc_length 16, crc 3297
1028  31333934  bus_name "1394"
1032  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
1036  0001f200  company_id 0001f2     |
1040  00093add  device_id 0000604893  | EUI-64 0547556791237341

               root directory
               -----------------------------------------------------------------
1044  0004ef04  directory_length 4, crc 61188
1048  030001f2  vendor
1052  0c0083c0  node capabilities: per IEEE 1394
1056  d1000002  --> unit directory at 1064
1060  8d000005  --> eui-64 leaf at 1080

               unit directory at 1064
               -----------------------------------------------------------------
1064  0003998d  directory_length 3, crc 39309
1068  120001f2  specifier id
1072  13000017  version
1076  17101800  model

               eui-64 leaf at 1080
               -----------------------------------------------------------------
1080  0002cc82  leaf_length 2, crc 52354
1084  0001f200  company_id 0001f2     |
1088  00093add  device_id 0000604893  | EUI-64 0547556791237341

$ config-rom-pretty-printer < motu-896mk3hybrid.img
               ROM header and bus information block
               -----------------------------------------------------------------
1024  04103cbe  bus_info_length 4, crc_length 16, crc 15550
1028  31333934  bus_name "1394"
1032  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
1036  0001f200  company_id 0001f2     |
1040  000ae601  device_id 0000714241  | EUI-64 0547556791346689

               root directory
               -----------------------------------------------------------------
1044  0004ef04  directory_length 4, crc 61188
1048  030001f2  vendor
1052  0c0083c0  node capabilities: per IEEE 1394
1056  d1000002  --> unit directory at 1064
1060  8d000005  --> eui-64 leaf at 1080

               unit directory at 1064
               -----------------------------------------------------------------
1064  000394ac  directory_length 3, crc 38060
1068  120001f2  specifier id
1072  13000037  version
1076  17102800  model

               eui-64 leaf at 1080
               -----------------------------------------------------------------
1080  0002cf69  leaf_length 2, crc 53097
1084  0001f200  company_id 0001f2     |
1088  000ae601  device_id 0000714241  | EUI-64 0547556791346689

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240129022711.254383-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29 09:04:30 +01:00

203 lines
6.1 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
menuconfig SND_FIREWIRE
bool "FireWire sound devices"
depends on FIREWIRE
default y
help
Support for IEEE-1394/FireWire/iLink sound devices.
if SND_FIREWIRE && FIREWIRE
config SND_FIREWIRE_LIB
tristate
select SND_PCM
select SND_RAWMIDI
config SND_DICE
tristate "DICE-based DACs support"
select SND_HWDEP
select SND_FIREWIRE_LIB
help
Say Y here to include support for devices based on the DICE chip family
(DICE-II/TCD2210(Mini)/TCD2220(Jr.)) which TC Applied Technologies (TCAT) produced.
* Allen and Heath Zed R16
* Alesis iO 14/26 FireWire, MasterControl, MultiMix 8/12/16 FireWire
* Avid Mbox 3 Pro
* FlexRadio Systems FLEX-3000, FLEX-5000
* Focusrite Liquid Saffire 56
* Focusrite Saffire Pro 14, Pro 24, Pro 24 DSP, Pro 26, Pro 40(TCD2220)
* Harman Music Group Lexicon I-ONIX FW810S
* Loud Technologies Mackie Onyx Blackbird, Onyx 820i/1220i/1620i/1640i (latter models)
* M-Audio ProFire 610/2626
* Mytek Stereo192-DSD DAC
* Midas Klark Teknik VeniceF series
* PreSonus FireStudio, FireStudio Mobile, FireStudio Project, FireStudio Tube
* PreSonus StudioLive 16.4.2, 16.0.2, 24.4.2, 32.4.2
* Solid State Logic Duende Classic, Duende Mini
* TC Electronic Studio Konnekt 48, Konnekt 24D, Konnekt Live, Impact Twin
* TC Electronic Digital Konnekt x32, Desktop Konnekt 6
* Weiss Engineering ADC2, Vesta, Minerva, AFI1, DAC1, INT202, DAC202
To compile this driver as a module, choose M here: the module
will be called snd-dice.
config SND_OXFW
tristate "Oxford Semiconductor FW970/971 chipset support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based on
Oxford Semiconductor FW970/971 chipset.
* Griffin Firewave
* LaCie Firewire Speakers
* Behringer F-Control Audio 202
* Mackie(Loud) Onyx-i series (former models)
* Mackie(Loud) Onyx 1640i (former model)
* Mackie(Loud) Onyx Satellite
* Mackie(Loud) Tapco Link.Firewire
* Mackie(Loud) d.2 pro/d.4 pro (built-in FireWire card with OXFW971 ASIC)
* Mackie(Loud) U.420/U.420d
* TASCAM FireOne
* Stanton Controllers & Systems 1 Deck/Mixer
* APOGEE duet FireWire
To compile this driver as a module, choose M here: the module
will be called snd-oxfw.
config SND_ISIGHT
tristate "Apple iSight microphone"
select SND_FIREWIRE_LIB
help
Say Y here to include support for the front and rear microphones
of the Apple iSight web camera.
To compile this driver as a module, choose M here: the module
will be called snd-isight.
config SND_FIREWORKS
tristate "Echo Fireworks board module support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on Echo Digital Audio Fireworks board:
* Mackie Onyx 400F/1200F
* Echo AudioFire12/8(until 2009 July)
* Echo AudioFire2/4/Pre8/8(since 2009 July)
* Echo Fireworks 8/HDMI
* Gibson Robot Interface Pack/GoldTop
To compile this driver as a module, choose M here: the module
will be called snd-fireworks.
config SND_BEBOB
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
* Edirol FA-66/FA-101
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
* BridgeCo RDAudio1/Audio5
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
* Mackie d.2 (optional FireWire card with DM1000 ASIC)
* Stanton FinalScratch 2 (ScratchAmp)
* Tascam IF-FW/DM
* Behringer XENIX UFX 1204/1604
* Behringer Digital Mixer X32 series (X-UF Card)
* Behringer FCA610/1616
* Apogee Rosetta 200/400 (X-FireWire card)
* Apogee DA/AD/DD-16X (X-FireWire card)
* Apogee Ensemble
* ESI QuataFire 610
* AcousticReality eARMasterOne
* CME MatrixKFW
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
* Lynx Aurora 8/16 (LT-FW)
* ICON FireXon
* PrismSound Orpheus/ADA-8XR
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
* TerraTec EWS MIC2/EWS MIC8
* TerraTec Aureon 7.1 FireWire
* Yamaha GO44/GO46
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
* M-Audio FireWire410/AudioPhile/Solo
* M-Audio Ozonic/NRV10/ProfireLightBridge
* M-Audio FireWire 1814/ProjectMix IO
* Digidesign Mbox 2 Pro
* ToneWeal FW66
To compile this driver as a module, choose M here: the module
will be called snd-bebob.
config SND_FIREWIRE_DIGI00X
tristate "Digidesign Digi 002/003 family support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for Digidesign Digi 002/003 family.
* Digi 002 Console
* Digi 002 Rack
* Digi 003 Console
* Digi 003 Rack
* Digi 003 Rack+
To compile this driver as a module, choose M here: the module
will be called snd-firewire-digi00x.
config SND_FIREWIRE_TASCAM
tristate "TASCAM FireWire series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for TASCAM.
* FW-1884
* FW-1082
* FW-1804
To compile this driver as a module, choose M here: the module
will be called snd-firewire-tascam.
config SND_FIREWIRE_MOTU
tristate "Mark of the unicorn FireWire series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to enable support for FireWire devices which MOTU produced:
* 828
* 896
* 828mk2
* 896hd
* Traveler
* Ultralite
* 8pre
* 828mk3 (FireWire only)
* 828mk3 (Hybrid)
* 896mk3 (FireWire only)
* 896mk3 (Hybrid)
* Ultralite mk3 (FireWire only)
* Ultralite mk3 (Hybrid)
* Traveler mk3
* Audio Express
* Track 16
* 4pre
To compile this driver as a module, choose M here: the module
will be called snd-firewire-motu.
config SND_FIREFACE
tristate "RME Fireface series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for RME fireface series.
* Fireface 400
* Fireface 800
* Fireface UFX
* Fireface UCX
* Fireface 802
endif # SND_FIREWIRE