linux/drivers/nfc/Kconfig
Robert Dolca a06347c04c NFC: Add Intel Fields Peak NFC solution driver
Fields Peak complies with the ISO/IEC 14443A/B, 15693, 18092,
and JIS X 6319-4. It is an NCI based controller.

RF Protocols supported:
 - NFC Forum Type 1 Tags (Jewel, Topaz)
 - NFC Forum Type 2 Tags (Mifare UL)
 - NFC Forum Type 3 Tags (FeliCa)
 - NFC Forum Type 4A (ISO/IEC 14443 A-4 106kbps to 848kbps)
 - NFC Forum Type 4B (ISO/IEC 14443 B-4 106kbps to 848kbps)
 - NFCIP in passive and active modes (ISO/IEC 18092 106kbps
   to 424kbps)
 - B’ (based on ISO/IEC 14443 B-2)
 - iCLASS (based on ISO/IEC 15693-2)
 - Vicinity cards (ISO/IEC 15693-3)
 - Kovio tags (NFC Forum Type 2)

The device can be enumerated using ACPI using the id INT339A.
The 1st GPIO is the IRQ and the 2nd is the RESET pin.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 20:29:16 +01:00

80 lines
2.3 KiB
Plaintext

#
# Near Field Communication (NFC) devices
#
menu "Near Field Communication (NFC) devices"
depends on NFC
config NFC_PN533
tristate "NXP PN533 USB driver"
depends on USB
help
NXP PN533 USB driver.
This driver provides support for NFC NXP PN533 devices.
Say Y here to compile support for PN533 devices into the
kernel or say M to compile it as module (pn533).
config NFC_WILINK
tristate "Texas Instruments NFC WiLink driver"
depends on TI_ST && NFC_NCI
help
This enables the NFC driver for Texas Instrument's BT/FM/GPS/NFC
combo devices. This makes use of shared transport line discipline
core driver to communicate with the NFC core of the combo chip.
Say Y here to compile support for Texas Instrument's NFC WiLink driver
into the kernel or say M to compile it as module.
config NFC_TRF7970A
tristate "Texas Instruments TRF7970a NFC driver"
depends on SPI && NFC_DIGITAL
help
This option enables the NFC driver for Texas Instruments' TRF7970a
device. Such device supports 5 different protocols: ISO14443A,
ISO14443B, FeLiCa, ISO15693 and ISO18000-3.
Say Y here to compile support for TRF7970a into the kernel or
say M to compile it as a module. The module will be called
trf7970a.ko.
config NFC_MEI_PHY
tristate "MEI bus NFC device support"
depends on INTEL_MEI && NFC_HCI
help
This adds support to use an mei bus nfc device. Select this if you
will use an HCI NFC driver for an NFC chip connected behind an
Intel's Management Engine chip.
If unsure, say N.
config NFC_SIM
tristate "NFC hardware simulator driver"
help
This driver declares two virtual NFC devices supporting NFC-DEP
protocol. An LLCP connection can be established between them and
all packets sent from one device is sent back to the other, acting as
loopback devices.
If unsure, say N.
config NFC_PORT100
tristate "Sony NFC Port-100 Series USB device support"
depends on USB
depends on NFC_DIGITAL
help
This adds support for Sony Port-100 chip based USB devices such as the
RC-S380 dongle.
If unsure, say N.
source "drivers/nfc/fdp/Kconfig"
source "drivers/nfc/pn544/Kconfig"
source "drivers/nfc/microread/Kconfig"
source "drivers/nfc/nfcmrvl/Kconfig"
source "drivers/nfc/st21nfca/Kconfig"
source "drivers/nfc/st-nci/Kconfig"
source "drivers/nfc/nxp-nci/Kconfig"
source "drivers/nfc/s3fwrn5/Kconfig"
endmenu