linux/arch/arm/mach-s5pc100/mach-smdkc100.c
Kyungmin Park 0c31862880 SMDKC100: add SDHCI controllers 0, 1 and 2 support
Add required machine definitions for SDHCI controller 0, 1 and 2. SMDKC100
has 2 SDHCI/MMC ports. Port 1 is directly connected to controller 0. Port
1 can be conntected to controler 1 or 2, depending on jumper setup.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:18 +00:00

191 lines
4.5 KiB
C

/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
*
* Copyright 2009 Samsung Electronics Co.
* Author: Byungho Min <bhmin@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/regs-fb.h>
#include <video/platform_lcd.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-gpio.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/s5pc100.h>
#include <plat/fb.h>
#include <plat/iic.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
};
/* I2C0 */
static struct i2c_board_info i2c_devs0[] __initdata = {
};
/* I2C1 */
static struct i2c_board_info i2c_devs1[] __initdata = {
};
/* LCD power controller */
static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
/* backlight */
gpio_direction_output(S5PC100_GPD(0), power);
if (power) {
/* module reset */
gpio_direction_output(S5PC100_GPH0(6), 1);
mdelay(100);
gpio_direction_output(S5PC100_GPH0(6), 0);
mdelay(10);
gpio_direction_output(S5PC100_GPH0(6), 1);
mdelay(10);
}
}
static struct plat_lcd_data smdkc100_lcd_power_data = {
.set_power = smdkc100_lcd_power_set,
};
static struct platform_device smdkc100_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &smdkc100_lcd_power_data,
};
/* Frame Buffer */
static struct s3c_fb_pd_win smdkc100_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 70,
.pixclock = (8+13+3+800)*(7+5+1+480),
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
},
.max_bpp = 32,
.default_bpp = 16,
};
static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
.win[0] = &smdkc100_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = s5pc100_fb_gpio_setup_24bpp,
};
static struct map_desc smdkc100_iodesc[] = {};
static struct platform_device *smdkc100_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&smdkc100_lcd_powerdev,
};
static void __init smdkc100_map_io(void)
{
s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
static void __init smdkc100_machine_init(void)
{
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_fb_set_platdata(&smdkc100_lcd_pdata);
/* LCD init */
gpio_request(S5PC100_GPD(0), "GPD");
gpio_request(S5PC100_GPH0(6), "GPH0");
smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
.phys_io = S5PC100_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S5PC100_PA_SDRAM + 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END