linux/drivers/scsi/lpfc/lpfc_disc.h
James Smart 858c9f6c19 [SCSI] lpfc: bug fixes
Following the NPIV support, the following changes have been accumulated
 in the testing and qualification of the driver:

 - Fix affinity of ELS ring to slow/deferred event processing
 - Fix Ring attention masks
 - Defer dev_loss_tmo timeout handling to worker thread
 - Consolidate link down error classification for better error checking
 - Remove unused/deprecated nlp_initiator_tmr timer
 - Fix for async scan - move adapter init code back into pci_probe_one
   context. Fix async scan interfaces.
 - Expand validation of ability to create vports
 - Extract VPI resource cnt from firmware
 - Tuning of Login/Reject policies to better deal with overwhelmned targets
 - Misc ELS and discovery fixes
 - Export the npiv_enable attribute to sysfs
 - Mailbox handling fix
 - Add debugfs support
 - A few other small misc fixes:
    - wrong return values, double-frees, bad locking
 - Added adapter failure heartbeat

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 22:38:11 -05:00

191 lines
9.8 KiB
C

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2004-2007 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
#define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */
#define FC_MAX_NS_RSP 65536 /* max size NameServer rsp */
#define FC_MAXLOOP 126 /* max devices supported on a fc loop */
#define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */
/* This is the protocol dependent definition for a Node List Entry.
* This is used by Fibre Channel protocol to support FCP.
*/
/* worker thread events */
enum lpfc_work_type {
LPFC_EVT_ONLINE,
LPFC_EVT_OFFLINE_PREP,
LPFC_EVT_OFFLINE,
LPFC_EVT_WARM_START,
LPFC_EVT_KILL,
LPFC_EVT_ELS_RETRY,
LPFC_EVT_DEV_LOSS_DELAY,
LPFC_EVT_DEV_LOSS,
};
/* structure used to queue event to the discovery tasklet */
struct lpfc_work_evt {
struct list_head evt_listp;
void *evt_arg1;
void *evt_arg2;
enum lpfc_work_type evt;
};
struct lpfc_nodelist {
struct list_head nlp_listp;
struct lpfc_name nlp_portname;
struct lpfc_name nlp_nodename;
uint32_t nlp_flag; /* entry flags */
uint32_t nlp_DID; /* FC D_ID of entry */
uint32_t nlp_last_elscmd; /* Last ELS cmd sent */
uint16_t nlp_type;
#define NLP_FC_NODE 0x1 /* entry is an FC node */
#define NLP_FABRIC 0x4 /* entry rep a Fabric entity */
#define NLP_FCP_TARGET 0x8 /* entry is an FCP target */
#define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */
uint16_t nlp_rpi;
uint16_t nlp_state; /* state transition indicator */
uint16_t nlp_prev_state; /* state transition indicator */
uint16_t nlp_xri; /* output exchange id for RPI */
uint16_t nlp_sid; /* scsi id */
#define NLP_NO_SID 0xffff
uint16_t nlp_maxframe; /* Max RCV frame size */
uint8_t nlp_class_sup; /* Supported Classes */
uint8_t nlp_retry; /* used for ELS retries */
uint8_t nlp_fcp_info; /* class info, bits 0-3 */
#define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */
struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */
struct fc_rport *rport; /* Corresponding FC transport
port structure */
struct lpfc_vport *vport;
struct lpfc_work_evt els_retry_evt;
struct lpfc_work_evt dev_loss_evt;
unsigned long last_ramp_up_time; /* jiffy of last ramp up */
unsigned long last_q_full_time; /* jiffy of last queue full */
struct kref kref;
};
/* Defines for nlp_flag (uint32) */
#define NLP_PLOGI_SND 0x20 /* sent PLOGI request for this entry */
#define NLP_PRLI_SND 0x40 /* sent PRLI request for this entry */
#define NLP_ADISC_SND 0x80 /* sent ADISC request for this entry */
#define NLP_LOGO_SND 0x100 /* sent LOGO request for this entry */
#define NLP_RNID_SND 0x400 /* sent RNID request for this entry */
#define NLP_ELS_SND_MASK 0x7e0 /* sent ELS request for this entry */
#define NLP_DELAY_TMO 0x20000 /* delay timeout is running for node */
#define NLP_NPR_2B_DISC 0x40000 /* node is included in num_disc_nodes */
#define NLP_RCV_PLOGI 0x80000 /* Rcv'ed PLOGI from remote system */
#define NLP_LOGO_ACC 0x100000 /* Process LOGO after ACC completes */
#define NLP_TGT_NO_SCSIID 0x200000 /* good PRLI but no binding for scsid */
#define NLP_ACC_REGLOGIN 0x1000000 /* Issue Reg Login after successful
ACC */
#define NLP_NPR_ADISC 0x2000000 /* Issue ADISC when dq'ed from
NPR list */
#define NLP_RM_DFLT_RPI 0x4000000 /* need to remove leftover dflt RPI */
#define NLP_NODEV_REMOVE 0x8000000 /* Defer removal till discovery ends */
#define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */
/* There are 4 different double linked lists nodelist entries can reside on.
* The Port Login (PLOGI) list and Address Discovery (ADISC) list are used
* when Link Up discovery or Registered State Change Notification (RSCN)
* processing is needed. Each list holds the nodes that require a PLOGI or
* ADISC Extended Link Service (ELS) request. These lists keep track of the
* nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected
* by Link Up) event. The unmapped_list contains all nodes that have
* successfully logged into at the Fibre Channel level. The
* mapped_list will contain all nodes that are mapped FCP targets.
*
* The bind list is a list of undiscovered (potentially non-existent) nodes
* that we have saved binding information on. This information is used when
* nodes transition from the unmapped to the mapped list.
*/
/* Defines for nlp_state */
#define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */
#define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */
#define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */
#define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */
#define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */
#define NLP_STE_UNMAPPED_NODE 0x5 /* PRLI completed from NL_PORT */
#define NLP_STE_MAPPED_NODE 0x6 /* Identified as a FCP Target */
#define NLP_STE_NPR_NODE 0x7 /* NPort disappeared */
#define NLP_STE_MAX_STATE 0x8
#define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */
/* For UNUSED_NODE state, the node has just been allocated.
* For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on
* the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list
* and put on the unmapped list. For ADISC processing, the node is taken off
* the ADISC list and placed on either the mapped or unmapped list (depending
* on its previous state). Once on the unmapped list, a PRLI is issued and the
* state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is
* changed to PRLI_COMPL. If the completion indicates a mapped
* node, the node is taken off the unmapped list. The binding list is checked
* for a valid binding, or a binding is automatically assigned. If binding
* assignment is unsuccessful, the node is left on the unmapped list. If
* binding assignment is successful, the associated binding list entry (if
* any) is removed, and the node is placed on the mapped list.
*/
/*
* For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
* lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
* expire, all effected nodes will receive a DEVICE_RM event.
*/
/*
* For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists
* to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap
* check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to /
* from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
* we will first process the ADISC list. 32 entries are processed initially and
* ADISC is initited for each one. Completions / Events for each node are
* funnelled thru the state machine. As each node finishes ADISC processing, it
* starts ADISC for any nodes waiting for ADISC processing. If no nodes are
* waiting, and the ADISC list count is identically 0, then we are done. For
* Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
* can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
* list. 32 entries are processed initially and PLOGI is initited for each one.
* Completions / Events for each node are funnelled thru the state machine. As
* each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
* for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
* identically 0, then we are done. We have now completed discovery / RSCN
* handling. Upon completion, ALL nodes should be on either the mapped or
* unmapped lists.
*/
/* Defines for Node List Entry Events that could happen */
#define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */
#define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */
#define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */
#define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */
#define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */
#define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */
#define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */
#define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */
#define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */
#define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */
#define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */
#define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */
#define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */
#define NLP_EVT_MAX_EVENT 0xd