linux/drivers/net/wireless/ath/ath9k/dfs_pri_detector.c
Zefir Kurtisi 6ee159e26f ath9k: add DFS pattern detector
This adds a DFS pattern detector to ath9k. It is fed with pulse events
by the radar pulse detector and reports in place whether a pattern
was detected. On detection, the result is reported as radar event to
the DFS management component in the upper layer.

Currently the ETSI DFS domain is supported with detector lines for
the patterns defined by EN-301-893 v1.5.1. Support for FCC and JP
will be added gradually.

To include the pattern detector, ath9k must be built with support
for DFS certified config flag set (CONFIG_ATH9K_DFS_CERTIFIED).

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11 16:23:52 -04:00

391 lines
9.7 KiB
C

/*
* Copyright (c) 2012 Neratec Solutions AG
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/slab.h>
#include "dfs_pattern_detector.h"
#include "dfs_pri_detector.h"
/**
* struct pri_sequence - sequence of pulses matching one PRI
* @head: list_head
* @pri: pulse repetition interval (PRI) in usecs
* @dur: duration of sequence in usecs
* @count: number of pulses in this sequence
* @count_falses: number of not matching pulses in this sequence
* @first_ts: time stamp of first pulse in usecs
* @last_ts: time stamp of last pulse in usecs
* @deadline_ts: deadline when this sequence becomes invalid (first_ts + dur)
*/
struct pri_sequence {
struct list_head head;
u32 pri;
u32 dur;
u32 count;
u32 count_falses;
u64 first_ts;
u64 last_ts;
u64 deadline_ts;
};
/**
* struct pulse_elem - elements in pulse queue
* @ts: time stamp in usecs
*/
struct pulse_elem {
struct list_head head;
u64 ts;
};
/**
* pde_get_multiple() - get number of multiples considering a given tolerance
* @return factor if abs(val - factor*fraction) <= tolerance, 0 otherwise
*/
static u32 pde_get_multiple(u32 val, u32 fraction, u32 tolerance)
{
u32 remainder;
u32 factor;
u32 delta;
if (fraction == 0)
return 0;
delta = (val < fraction) ? (fraction - val) : (val - fraction);
if (delta <= tolerance)
/* val and fraction are within tolerance */
return 1;
factor = val / fraction;
remainder = val % fraction;
if (remainder > tolerance) {
/* no exact match */
if ((fraction - remainder) <= tolerance)
/* remainder is within tolerance */
factor++;
else
factor = 0;
}
return factor;
}
/**
* DOC: Singleton Pulse and Sequence Pools
*
* Instances of pri_sequence and pulse_elem are kept in singleton pools to
* reduce the number of dynamic allocations. They are shared between all
* instances and grow up to the peak number of simultaneously used objects.
*
* Memory is freed after all references to the pools are released.
*/
static u32 singleton_pool_references;
static LIST_HEAD(pulse_pool);
static LIST_HEAD(pseq_pool);
static struct pulse_elem *pulse_queue_get_tail(struct pri_detector *pde)
{
struct list_head *l = &pde->pulses;
if (list_empty(l))
return NULL;
return list_entry(l->prev, struct pulse_elem, head);
}
static bool pulse_queue_dequeue(struct pri_detector *pde)
{
struct pulse_elem *p = pulse_queue_get_tail(pde);
if (p != NULL) {
list_del_init(&p->head);
pde->count--;
/* give it back to pool */
list_add(&p->head, &pulse_pool);
}
return (pde->count > 0);
}
/* remove pulses older than window */
static void pulse_queue_check_window(struct pri_detector *pde)
{
u64 min_valid_ts;
struct pulse_elem *p;
/* there is no delta time with less than 2 pulses */
if (pde->count < 2)
return;
if (pde->last_ts <= pde->window_size)
return;
min_valid_ts = pde->last_ts - pde->window_size;
while ((p = pulse_queue_get_tail(pde)) != NULL) {
if (p->ts >= min_valid_ts)
return;
pulse_queue_dequeue(pde);
}
}
static bool pulse_queue_enqueue(struct pri_detector *pde, u64 ts)
{
struct pulse_elem *p;
if (!list_empty(&pulse_pool)) {
p = list_first_entry(&pulse_pool, struct pulse_elem, head);
list_del(&p->head);
} else {
p = kmalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL) {
pr_err("failed to allocate pulse_elem\n");
return false;
}
}
INIT_LIST_HEAD(&p->head);
p->ts = ts;
list_add(&p->head, &pde->pulses);
pde->count++;
pde->last_ts = ts;
pulse_queue_check_window(pde);
if (pde->count >= pde->max_count)
pulse_queue_dequeue(pde);
return true;
}
static bool pseq_handler_create_sequences(struct pri_detector *pde,
u64 ts, u32 min_count)
{
struct pulse_elem *p;
list_for_each_entry(p, &pde->pulses, head) {
struct pri_sequence ps, *new_ps;
struct pulse_elem *p2;
u32 tmp_false_count;
u64 min_valid_ts;
u32 delta_ts = ts - p->ts;
if (delta_ts < pde->rs->pri_min)
/* ignore too small pri */
continue;
if (delta_ts > pde->rs->pri_max)
/* stop on too large pri (sorted list) */
break;
/* build a new sequence with new potential pri */
ps.count = 2;
ps.count_falses = 0;
ps.first_ts = p->ts;
ps.last_ts = ts;
ps.pri = ts - p->ts;
ps.dur = ps.pri * (pde->rs->ppb - 1)
+ 2 * pde->rs->max_pri_tolerance;
p2 = p;
tmp_false_count = 0;
min_valid_ts = ts - ps.dur;
/* check which past pulses are candidates for new sequence */
list_for_each_entry_continue(p2, &pde->pulses, head) {
u32 factor;
if (p2->ts < min_valid_ts)
/* stop on crossing window border */
break;
/* check if pulse match (multi)PRI */
factor = pde_get_multiple(ps.last_ts - p2->ts, ps.pri,
pde->rs->max_pri_tolerance);
if (factor > 0) {
ps.count++;
ps.first_ts = p2->ts;
/*
* on match, add the intermediate falses
* and reset counter
*/
ps.count_falses += tmp_false_count;
tmp_false_count = 0;
} else {
/* this is a potential false one */
tmp_false_count++;
}
}
if (ps.count < min_count)
/* did not reach minimum count, drop sequence */
continue;
/* this is a valid one, add it */
ps.deadline_ts = ps.first_ts + ps.dur;
if (!list_empty(&pseq_pool)) {
new_ps = list_first_entry(&pseq_pool,
struct pri_sequence, head);
list_del(&new_ps->head);
} else {
new_ps = kmalloc(sizeof(*new_ps), GFP_KERNEL);
if (new_ps == NULL)
return false;
}
memcpy(new_ps, &ps, sizeof(ps));
INIT_LIST_HEAD(&new_ps->head);
list_add(&new_ps->head, &pde->sequences);
}
return true;
}
/* check new ts and add to all matching existing sequences */
static u32
pseq_handler_add_to_existing_seqs(struct pri_detector *pde, u64 ts)
{
u32 max_count = 0;
struct pri_sequence *ps, *ps2;
list_for_each_entry_safe(ps, ps2, &pde->sequences, head) {
u32 delta_ts;
u32 factor;
/* first ensure that sequence is within window */
if (ts > ps->deadline_ts) {
list_del_init(&ps->head);
list_add(&ps->head, &pseq_pool);
continue;
}
delta_ts = ts - ps->last_ts;
factor = pde_get_multiple(delta_ts, ps->pri,
pde->rs->max_pri_tolerance);
if (factor > 0) {
ps->last_ts = ts;
ps->count++;
if (max_count < ps->count)
max_count = ps->count;
} else {
ps->count_falses++;
}
}
return max_count;
}
static struct pri_sequence *
pseq_handler_check_detection(struct pri_detector *pde)
{
struct pri_sequence *ps;
if (list_empty(&pde->sequences))
return NULL;
list_for_each_entry(ps, &pde->sequences, head) {
/*
* we assume to have enough matching confidence if we
* 1) have enough pulses
* 2) have more matching than false pulses
*/
if ((ps->count >= pde->rs->ppb_thresh) &&
(ps->count * pde->rs->num_pri >= ps->count_falses))
return ps;
}
return NULL;
}
/* free pulse queue and sequences list and give objects back to pools */
static void pri_detector_reset(struct pri_detector *pde, u64 ts)
{
struct pri_sequence *ps, *ps0;
struct pulse_elem *p, *p0;
list_for_each_entry_safe(ps, ps0, &pde->sequences, head) {
list_del_init(&ps->head);
list_add(&ps->head, &pseq_pool);
}
list_for_each_entry_safe(p, p0, &pde->pulses, head) {
list_del_init(&p->head);
list_add(&p->head, &pulse_pool);
}
pde->count = 0;
pde->last_ts = ts;
}
static void pri_detector_exit(struct pri_detector *de)
{
pri_detector_reset(de, 0);
singleton_pool_references--;
if (singleton_pool_references == 0) {
/* free singleton pools with no references left */
struct pri_sequence *ps, *ps0;
struct pulse_elem *p, *p0;
list_for_each_entry_safe(p, p0, &pulse_pool, head) {
list_del(&p->head);
kfree(p);
}
list_for_each_entry_safe(ps, ps0, &pseq_pool, head) {
list_del(&ps->head);
kfree(ps);
}
}
kfree(de);
}
static bool pri_detector_add_pulse(struct pri_detector *de,
struct pulse_event *event)
{
u32 max_updated_seq;
struct pri_sequence *ps;
u64 ts = event->ts;
const struct radar_detector_specs *rs = de->rs;
/* ignore pulses not within width range */
if ((rs->width_min > event->width) || (rs->width_max < event->width))
return false;
if ((ts - de->last_ts) < rs->max_pri_tolerance)
/* if delta to last pulse is too short, don't use this pulse */
return false;
de->last_ts = ts;
max_updated_seq = pseq_handler_add_to_existing_seqs(de, ts);
if (!pseq_handler_create_sequences(de, ts, max_updated_seq)) {
pr_err("failed to create pulse sequences\n");
pri_detector_reset(de, ts);
return false;
}
ps = pseq_handler_check_detection(de);
if (ps != NULL) {
pr_info("DFS: radar found: pri=%d, count=%d, count_false=%d\n",
ps->pri, ps->count, ps->count_falses);
pri_detector_reset(de, ts);
return true;
}
pulse_queue_enqueue(de, ts);
return false;
}
struct pri_detector *
pri_detector_init(const struct radar_detector_specs *rs)
{
struct pri_detector *de;
de = kzalloc(sizeof(*de), GFP_KERNEL);
if (de == NULL)
return NULL;
de->exit = pri_detector_exit;
de->add_pulse = pri_detector_add_pulse;
de->reset = pri_detector_reset;
INIT_LIST_HEAD(&de->sequences);
INIT_LIST_HEAD(&de->pulses);
de->window_size = rs->pri_max * rs->ppb * rs->num_pri;
de->max_count = rs->ppb * 2;
de->rs = rs;
singleton_pool_references++;
return de;
}