linux/arch/arm/include/asm/entry-macro-vic2.S
Ben Dooks 5b39be4637 ARM: Add common entry code for system with two VICs
Add a common entry-macro-vic2.S for systems where there are two VICs
so that the machine or platform directories just need to setup the
correct information before including <asm/entry-macro-vic2.S> into
their own entry-macro.S file.

Since this code is from the S3C64XX project, we update the S3C64XX
machine entry code to use this new header.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:14 +09:00

58 lines
1.5 KiB
ArmAsm

/* arch/arm/include/asm/entry-macro-vic2.S
*
* Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Low-level IRQ helper macros for a device with two VICs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/* This should be included from <mach/entry-macro.S> with the necessary
* defines for virtual addresses and IRQ bases for the two vics.
*
* The code needs the following defined:
* IRQ_VIC0_BASE IRQ number of VIC0's first IRQ
* IRQ_VIC1_BASE IRQ number of VIC1's first IRQ
* VA_VIC0 Virtual address of VIC0
* VA_VIC1 Virtual address of VIC1
*
* Note, code assumes VIC0's virtual address is an ARM immediate constant
* away from VIC1.
*/
#include <asm/hardware/vic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check the vic0
mov \irqnr, #IRQ_VIC0_BASE + 31
ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
teq \irqstat, #0
@ otherwise try vic1
addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm