linux/drivers/net/wireless/rt2x00/rt2x00pci.c
Gabor Juhos 69a2bac898 rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCs
The rt2800pci driver supports the built-in wireless
MAC of the Ralink RT3x5x SoCs. However building the
driver for these SoCs leads to the following error:

    LD      init/built-in.o
  drivers/built-in.o: In function `rt2800pci_rxdone_tasklet':
  <...>/drivers/net/wireless/rt2x00/rt2800pci.c:1012: undefined reference to `rt2x00pci_rxdone'
  drivers/built-in.o:(.rodata+0x4780): undefined reference to `rt2x00pci_initialize'
  drivers/built-in.o:(.rodata+0x4784): undefined reference to `rt2x00pci_uninitialize'
  drivers/built-in.o:(.rodata+0x47bc): undefined reference to `rt2x00pci_flush_queue'
  drivers/built-in.o:(.rodata+0x4818): undefined reference to `rt2x00pci_regbusy_read'
  make[5]: *** [vmlinux] Error 1

The missing functions are provided by the rt2x00pci
module. This module is only selected by the rt2800pci
driver if PCI support is enabled in the kernel, because
some parts of the rt2x00pci code depends on PCI support.

PCI support is not available on the RT3x5x SoCs because
those have no PCI host controller at all.

Move the non PCI specific code from rt2x00pci into a
separate module. This makes it possible to use that
code even if PCI support is disabled. The affected
functions are used by all of the rt2x00 PCI drivers
so select the new module for those drivers.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03 14:50:06 -04:00

227 lines
5.1 KiB
C

/*
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00pci
Abstract: rt2x00 generic pci device routines.
*/
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00pci.h"
/*
* PCI driver handlers.
*/
static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev)
{
kfree(rt2x00dev->rf);
rt2x00dev->rf = NULL;
kfree(rt2x00dev->eeprom);
rt2x00dev->eeprom = NULL;
if (rt2x00dev->csr.base) {
iounmap(rt2x00dev->csr.base);
rt2x00dev->csr.base = NULL;
}
}
static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev)
{
struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
rt2x00dev->csr.base = pci_ioremap_bar(pci_dev, 0);
if (!rt2x00dev->csr.base)
goto exit;
rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
if (!rt2x00dev->eeprom)
goto exit;
rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
if (!rt2x00dev->rf)
goto exit;
return 0;
exit:
ERROR_PROBE("Failed to allocate registers.\n");
rt2x00pci_free_reg(rt2x00dev);
return -ENOMEM;
}
int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
{
struct ieee80211_hw *hw;
struct rt2x00_dev *rt2x00dev;
int retval;
u16 chip;
retval = pci_enable_device(pci_dev);
if (retval) {
ERROR_PROBE("Enable device failed.\n");
return retval;
}
retval = pci_request_regions(pci_dev, pci_name(pci_dev));
if (retval) {
ERROR_PROBE("PCI request regions failed.\n");
goto exit_disable_device;
}
pci_set_master(pci_dev);
if (pci_set_mwi(pci_dev))
ERROR_PROBE("MWI not available.\n");
if (dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32))) {
ERROR_PROBE("PCI DMA not supported.\n");
retval = -EIO;
goto exit_release_regions;
}
hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
if (!hw) {
ERROR_PROBE("Failed to allocate hardware.\n");
retval = -ENOMEM;
goto exit_release_regions;
}
pci_set_drvdata(pci_dev, hw);
rt2x00dev = hw->priv;
rt2x00dev->dev = &pci_dev->dev;
rt2x00dev->ops = ops;
rt2x00dev->hw = hw;
rt2x00dev->irq = pci_dev->irq;
rt2x00dev->name = pci_name(pci_dev);
if (pci_is_pcie(pci_dev))
rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
else
rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
retval = rt2x00pci_alloc_reg(rt2x00dev);
if (retval)
goto exit_free_device;
/*
* Because rt3290 chip use different efuse offset to read efuse data.
* So before read efuse it need to indicate it is the
* rt3290 or not.
*/
pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
rt2x00dev->chip.rt = chip;
retval = rt2x00lib_probe_dev(rt2x00dev);
if (retval)
goto exit_free_reg;
return 0;
exit_free_reg:
rt2x00pci_free_reg(rt2x00dev);
exit_free_device:
ieee80211_free_hw(hw);
exit_release_regions:
pci_release_regions(pci_dev);
exit_disable_device:
pci_disable_device(pci_dev);
pci_set_drvdata(pci_dev, NULL);
return retval;
}
EXPORT_SYMBOL_GPL(rt2x00pci_probe);
void rt2x00pci_remove(struct pci_dev *pci_dev)
{
struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
struct rt2x00_dev *rt2x00dev = hw->priv;
/*
* Free all allocated data.
*/
rt2x00lib_remove_dev(rt2x00dev);
rt2x00pci_free_reg(rt2x00dev);
ieee80211_free_hw(hw);
/*
* Free the PCI device data.
*/
pci_set_drvdata(pci_dev, NULL);
pci_disable_device(pci_dev);
pci_release_regions(pci_dev);
}
EXPORT_SYMBOL_GPL(rt2x00pci_remove);
#ifdef CONFIG_PM
int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state)
{
struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
struct rt2x00_dev *rt2x00dev = hw->priv;
int retval;
retval = rt2x00lib_suspend(rt2x00dev, state);
if (retval)
return retval;
pci_save_state(pci_dev);
pci_disable_device(pci_dev);
return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
}
EXPORT_SYMBOL_GPL(rt2x00pci_suspend);
int rt2x00pci_resume(struct pci_dev *pci_dev)
{
struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
struct rt2x00_dev *rt2x00dev = hw->priv;
if (pci_set_power_state(pci_dev, PCI_D0) ||
pci_enable_device(pci_dev)) {
ERROR(rt2x00dev, "Failed to resume device.\n");
return -EIO;
}
pci_restore_state(pci_dev);
return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00pci_resume);
#endif /* CONFIG_PM */
/*
* rt2x00pci module information.
*/
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("rt2x00 pci library");
MODULE_LICENSE("GPL");