linux/kernel/Makefile
Linus Torvalds ae045e2455 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...
2014-08-06 09:38:14 -07:00

208 lines
7.3 KiB
Makefile

#
# Makefile for the linux kernel.
#
obj-y = fork.o exec_domain.o panic.o \
cpu.o exit.o softirq.o resource.o \
sysctl.o sysctl_binary.o capability.o ptrace.o user.o \
signal.o sys.o kmod.o workqueue.o pid.o task_work.o \
extable.o params.o \
kthread.o sys_ni.o nsproxy.o \
notifier.o ksysfs.o cred.o reboot.o \
async.o range.o groups.o smpboot.o
ifdef CONFIG_FUNCTION_TRACER
# Do not trace debug files and internal ftrace files
CFLAGS_REMOVE_cgroup-debug.o = -pg
CFLAGS_REMOVE_irq_work.o = -pg
endif
# cond_syscall is currently not LTO compatible
CFLAGS_sys_ni.o = $(DISABLE_LTO)
obj-y += sched/
obj-y += locking/
obj-y += power/
obj-y += printk/
obj-y += irq/
obj-y += rcu/
obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o
obj-$(CONFIG_FREEZER) += freezer.o
obj-$(CONFIG_PROFILING) += profile.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += time/
obj-$(CONFIG_FUTEX) += futex.o
ifeq ($(CONFIG_COMPAT),y)
obj-$(CONFIG_FUTEX) += futex_compat.o
endif
obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
obj-$(CONFIG_SMP) += smp.o
ifneq ($(CONFIG_SMP),y)
obj-y += up.o
endif
obj-$(CONFIG_UID16) += uid16.o
obj-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += system_keyring.o system_certificates.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_MODULE_SIG) += module_signing.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_BACKTRACE_SELF_TEST) += backtracetest.o
obj-$(CONFIG_COMPAT) += compat.o
obj-$(CONFIG_CGROUPS) += cgroup.o
obj-$(CONFIG_CGROUP_FREEZER) += cgroup_freezer.o
obj-$(CONFIG_CPUSETS) += cpuset.o
obj-$(CONFIG_UTS_NS) += utsname.o
obj-$(CONFIG_USER_NS) += user_namespace.o
obj-$(CONFIG_PID_NS) += pid_namespace.o
obj-$(CONFIG_IKCONFIG) += configs.o
obj-$(CONFIG_RESOURCE_COUNTERS) += res_counter.o
obj-$(CONFIG_SMP) += stop_machine.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
obj-$(CONFIG_AUDIT_WATCH) += audit_watch.o
obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
obj-$(CONFIG_GCOV_KERNEL) += gcov/
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_KGDB) += debug/
obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RELAY) += relay.o
obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o
obj-$(CONFIG_TRACEPOINTS) += tracepoint.o
obj-$(CONFIG_LATENCYTOP) += latencytop.o
obj-$(CONFIG_BINFMT_ELF) += elfcore.o
obj-$(CONFIG_COMPAT_BINFMT_ELF) += elfcore.o
obj-$(CONFIG_BINFMT_ELF_FDPIC) += elfcore.o
obj-$(CONFIG_FUNCTION_TRACER) += trace/
obj-$(CONFIG_TRACING) += trace/
obj-$(CONFIG_TRACE_CLOCK) += trace/
obj-$(CONFIG_RING_BUFFER) += trace/
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_IRQ_WORK) += irq_work.o
obj-$(CONFIG_CPU_PM) += cpu_pm.o
obj-$(CONFIG_NET) += bpf/
obj-$(CONFIG_PERF_EVENTS) += events/
obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
obj-$(CONFIG_PADATA) += padata.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o
obj-$(CONFIG_TORTURE_TEST) += torture.o
$(obj)/configs.o: $(obj)/config_data.h
# config_data.h contains the same information as ikconfig.h but gzipped.
# Info from config_data can be extracted from /proc/config*
targets += config_data.gz
$(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE
$(call if_changed,gzip)
filechk_ikconfiggz = (echo "static const char kernel_config_data[] __used = MAGIC_START"; cat $< | scripts/bin2c; echo "MAGIC_END;")
targets += config_data.h
$(obj)/config_data.h: $(obj)/config_data.gz FORCE
$(call filechk,ikconfiggz)
###############################################################################
#
# Roll all the X.509 certificates that we can find together and pull them into
# the kernel so that they get loaded into the system trusted keyring during
# boot.
#
# We look in the source root and the build root for all files whose name ends
# in ".x509". Unfortunately, this will generate duplicate filenames, so we
# have make canonicalise the pathnames and then sort them to discard the
# duplicates.
#
###############################################################################
ifeq ($(CONFIG_SYSTEM_TRUSTED_KEYRING),y)
X509_CERTIFICATES-y := $(wildcard *.x509) $(wildcard $(srctree)/*.x509)
X509_CERTIFICATES-$(CONFIG_MODULE_SIG) += $(objtree)/signing_key.x509
X509_CERTIFICATES-raw := $(sort $(foreach CERT,$(X509_CERTIFICATES-y), \
$(or $(realpath $(CERT)),$(CERT))))
X509_CERTIFICATES := $(subst $(realpath $(objtree))/,,$(X509_CERTIFICATES-raw))
ifeq ($(X509_CERTIFICATES),)
$(warning *** No X.509 certificates found ***)
endif
ifneq ($(wildcard $(obj)/.x509.list),)
ifneq ($(shell cat $(obj)/.x509.list),$(X509_CERTIFICATES))
$(info X.509 certificate list changed)
$(shell rm $(obj)/.x509.list)
endif
endif
kernel/system_certificates.o: $(obj)/x509_certificate_list
quiet_cmd_x509certs = CERTS $@
cmd_x509certs = cat $(X509_CERTIFICATES) /dev/null >$@ $(foreach X509,$(X509_CERTIFICATES),; echo " - Including cert $(X509)")
targets += $(obj)/x509_certificate_list
$(obj)/x509_certificate_list: $(X509_CERTIFICATES) $(obj)/.x509.list
$(call if_changed,x509certs)
targets += $(obj)/.x509.list
$(obj)/.x509.list:
@echo $(X509_CERTIFICATES) >$@
endif
clean-files := x509_certificate_list .x509.list
ifeq ($(CONFIG_MODULE_SIG),y)
###############################################################################
#
# If module signing is requested, say by allyesconfig, but a key has not been
# supplied, then one will need to be generated to make sure the build does not
# fail and that the kernel may be used afterwards.
#
###############################################################################
ifndef CONFIG_MODULE_SIG_HASH
$(error Could not determine digest type to use from kernel config)
endif
signing_key.priv signing_key.x509: x509.genkey
@echo "###"
@echo "### Now generating an X.509 key pair to be used for signing modules."
@echo "###"
@echo "### If this takes a long time, you might wish to run rngd in the"
@echo "### background to keep the supply of entropy topped up. It"
@echo "### needs to be run as root, and uses a hardware random"
@echo "### number generator if one is available."
@echo "###"
openssl req -new -nodes -utf8 -$(CONFIG_MODULE_SIG_HASH) -days 36500 \
-batch -x509 -config x509.genkey \
-outform DER -out signing_key.x509 \
-keyout signing_key.priv 2>&1
@echo "###"
@echo "### Key pair generated."
@echo "###"
x509.genkey:
@echo Generating X.509 key generation config
@echo >x509.genkey "[ req ]"
@echo >>x509.genkey "default_bits = 4096"
@echo >>x509.genkey "distinguished_name = req_distinguished_name"
@echo >>x509.genkey "prompt = no"
@echo >>x509.genkey "string_mask = utf8only"
@echo >>x509.genkey "x509_extensions = myexts"
@echo >>x509.genkey
@echo >>x509.genkey "[ req_distinguished_name ]"
@echo >>x509.genkey "O = Magrathea"
@echo >>x509.genkey "CN = Glacier signing key"
@echo >>x509.genkey "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>x509.genkey
@echo >>x509.genkey "[ myexts ]"
@echo >>x509.genkey "basicConstraints=critical,CA:FALSE"
@echo >>x509.genkey "keyUsage=digitalSignature"
@echo >>x509.genkey "subjectKeyIdentifier=hash"
@echo >>x509.genkey "authorityKeyIdentifier=keyid"
endif