linux/drivers/thermal/ti-soc-thermal/Kconfig
Keerthy 173a312712 thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL
Currently when CPU_THERMAL is not defined the thermal sensors
are not even exposed consequently no cooling is possible. CPU_THERMAL
eventually depends on CPUFREQ. CPPUFREQ is not the only cooling
for CPU.

The thermal shutdown for critical temperatures is another
cooling solution which will currently not get enabled if CPU_THERMAL
is not defined. Remove this dependency so as to have the last level
of thermal protection working even without CPUFREQ defined.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18 17:43:56 -08:00

73 lines
2.2 KiB
Plaintext

config TI_SOC_THERMAL
tristate "Texas Instruments SoCs temperature sensor driver"
help
If you say yes here you get support for the Texas Instruments
OMAP4460+ on die bandgap temperature sensor support. The register
set is part of system control module.
This includes alert interrupts generation and also the TSHUT
support.
config TI_THERMAL
bool "Texas Instruments SoCs thermal framework support"
depends on TI_SOC_THERMAL
help
If you say yes here you want to get support for generic thermal
framework for the Texas Instruments on die bandgap temperature sensor.
This includes trip points definitions, extrapolation rules and
CPU cooling device bindings.
config OMAP3_THERMAL
bool "Texas Instruments OMAP3 thermal support"
depends on TI_SOC_THERMAL
depends on ARCH_OMAP3 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
OMAP3 SoC family. The current chips supported are:
- OMAP3430
OMAP3 chips normally don't need thermal management, and sensors in
this generation are not accurate, nor they are very close to
the important hotspots.
Say 'N' here.
config OMAP4_THERMAL
bool "Texas Instruments OMAP4 thermal support"
depends on TI_SOC_THERMAL
depends on ARCH_OMAP4 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
OMAP4 SoC family. The current chip supported are:
- OMAP4430
- OMAP4460
- OMAP4470
This includes alert interrupts generation and also the TSHUT
support.
config OMAP5_THERMAL
bool "Texas Instruments OMAP5 thermal support"
depends on TI_SOC_THERMAL
depends on SOC_OMAP5 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
OMAP5 SoC family. The current chip supported are:
- OMAP5430
This includes alert interrupts generation and also the TSHUT
support.
config DRA752_THERMAL
bool "Texas Instruments DRA752 thermal support"
depends on TI_SOC_THERMAL
depends on SOC_DRA7XX || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
DRA752 SoC family. The current chip supported are:
- DRA752
This includes alert interrupts generation and also the TSHUT
support.