linux/arch/sparc/lib/NGmemcpy.S
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

511 lines
13 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
/* NGmemcpy.S: Niagara optimized memcpy.
*
* Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#ifdef __KERNEL__
#include <linux/linkage.h>
#include <asm/asi.h>
#include <asm/thread_info.h>
#define GLOBAL_SPARE %g7
#define RESTORE_ASI(TMP) \
ldub [%g6 + TI_CURRENT_DS], TMP; \
wr TMP, 0x0, %asi;
#else
#define GLOBAL_SPARE %g5
#define RESTORE_ASI(TMP) \
wr %g0, ASI_PNF, %asi
#endif
#ifdef __sparc_v9__
#define SAVE_AMOUNT 128
#else
#define SAVE_AMOUNT 64
#endif
#ifndef STORE_ASI
#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P
#endif
#ifndef EX_LD
#define EX_LD(x,y) x
#endif
#ifndef EX_ST
#define EX_ST(x,y) x
#endif
#ifndef LOAD
#ifndef MEMCPY_DEBUG
#define LOAD(type,addr,dest) type [addr], dest
#else
#define LOAD(type,addr,dest) type##a [addr] 0x80, dest
#endif
#endif
#ifndef LOAD_TWIN
#define LOAD_TWIN(addr_reg,dest0,dest1) \
ldda [addr_reg] ASI_BLK_INIT_QUAD_LDD_P, dest0
#endif
#ifndef STORE
#define STORE(type,src,addr) type src, [addr]
#endif
#ifndef STORE_INIT
#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA
#define STORE_INIT(src,addr) stxa src, [addr] %asi
#else
#define STORE_INIT(src,addr) stx src, [addr + 0x00]
#endif
#endif
#ifndef FUNC_NAME
#define FUNC_NAME NGmemcpy
#endif
#ifndef PREAMBLE
#define PREAMBLE
#endif
#ifndef XCC
#define XCC xcc
#endif
.register %g2,#scratch
.register %g3,#scratch
.text
#ifndef EX_RETVAL
#define EX_RETVAL(x) x
__restore_asi:
ret
wr %g0, ASI_AIUS, %asi
restore
ENTRY(NG_ret_i2_plus_i4_plus_1)
ba,pt %xcc, __restore_asi
add %i2, %i5, %i0
ENDPROC(NG_ret_i2_plus_i4_plus_1)
ENTRY(NG_ret_i2_plus_g1)
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1)
ENTRY(NG_ret_i2_plus_g1_minus_8)
sub %g1, 8, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_minus_8)
ENTRY(NG_ret_i2_plus_g1_minus_16)
sub %g1, 16, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_minus_16)
ENTRY(NG_ret_i2_plus_g1_minus_24)
sub %g1, 24, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_minus_24)
ENTRY(NG_ret_i2_plus_g1_minus_32)
sub %g1, 32, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_minus_32)
ENTRY(NG_ret_i2_plus_g1_minus_40)
sub %g1, 40, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_minus_40)
ENTRY(NG_ret_i2_plus_g1_minus_48)
sub %g1, 48, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_minus_48)
ENTRY(NG_ret_i2_plus_g1_minus_56)
sub %g1, 56, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_minus_56)
ENTRY(NG_ret_i2_plus_i4)
ba,pt %xcc, __restore_asi
add %i2, %i4, %i0
ENDPROC(NG_ret_i2_plus_i4)
ENTRY(NG_ret_i2_plus_i4_minus_8)
sub %i4, 8, %i4
ba,pt %xcc, __restore_asi
add %i2, %i4, %i0
ENDPROC(NG_ret_i2_plus_i4_minus_8)
ENTRY(NG_ret_i2_plus_8)
ba,pt %xcc, __restore_asi
add %i2, 8, %i0
ENDPROC(NG_ret_i2_plus_8)
ENTRY(NG_ret_i2_plus_4)
ba,pt %xcc, __restore_asi
add %i2, 4, %i0
ENDPROC(NG_ret_i2_plus_4)
ENTRY(NG_ret_i2_plus_1)
ba,pt %xcc, __restore_asi
add %i2, 1, %i0
ENDPROC(NG_ret_i2_plus_1)
ENTRY(NG_ret_i2_plus_g1_plus_1)
add %g1, 1, %g1
ba,pt %xcc, __restore_asi
add %i2, %g1, %i0
ENDPROC(NG_ret_i2_plus_g1_plus_1)
ENTRY(NG_ret_i2)
ba,pt %xcc, __restore_asi
mov %i2, %i0
ENDPROC(NG_ret_i2)
ENTRY(NG_ret_i2_and_7_plus_i4)
and %i2, 7, %i2
ba,pt %xcc, __restore_asi
add %i2, %i4, %i0
ENDPROC(NG_ret_i2_and_7_plus_i4)
#endif
.align 64
.globl FUNC_NAME
.type FUNC_NAME,#function
FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */
PREAMBLE
save %sp, -SAVE_AMOUNT, %sp
srlx %i2, 31, %g2
cmp %g2, 0
tne %xcc, 5
mov %i0, %o0
cmp %i2, 0
be,pn %XCC, 85f
or %o0, %i1, %i3
cmp %i2, 16
blu,a,pn %XCC, 80f
or %i3, %i2, %i3
/* 2 blocks (128 bytes) is the minimum we can do the block
* copy with. We need to ensure that we'll iterate at least
* once in the block copy loop. At worst we'll need to align
* the destination to a 64-byte boundary which can chew up
* to (64 - 1) bytes from the length before we perform the
* block copy loop.
*/
cmp %i2, (2 * 64)
blu,pt %XCC, 70f
andcc %i3, 0x7, %g0
/* %o0: dst
* %i1: src
* %i2: len (known to be >= 128)
*
* The block copy loops will use %i4/%i5,%g2/%g3 as
* temporaries while copying the data.
*/
LOAD(prefetch, %i1, #one_read)
wr %g0, STORE_ASI, %asi
/* Align destination on 64-byte boundary. */
andcc %o0, (64 - 1), %i4
be,pt %XCC, 2f
sub %i4, 64, %i4
sub %g0, %i4, %i4 ! bytes to align dst
sub %i2, %i4, %i2
1: subcc %i4, 1, %i4
EX_LD(LOAD(ldub, %i1, %g1), NG_ret_i2_plus_i4_plus_1)
EX_ST(STORE(stb, %g1, %o0), NG_ret_i2_plus_i4_plus_1)
add %i1, 1, %i1
bne,pt %XCC, 1b
add %o0, 1, %o0
/* If the source is on a 16-byte boundary we can do
* the direct block copy loop. If it is 8-byte aligned
* we can do the 16-byte loads offset by -8 bytes and the
* init stores offset by one register.
*
* If the source is not even 8-byte aligned, we need to do
* shifting and masking (basically integer faligndata).
*
* The careful bit with init stores is that if we store
* to any part of the cache line we have to store the whole
* cacheline else we can end up with corrupt L2 cache line
* contents. Since the loop works on 64-bytes of 64-byte
* aligned store data at a time, this is easy to ensure.
*/
2:
andcc %i1, (16 - 1), %i4
andn %i2, (64 - 1), %g1 ! block copy loop iterator
be,pt %XCC, 50f
sub %i2, %g1, %i2 ! final sub-block copy bytes
cmp %i4, 8
be,pt %XCC, 10f
sub %i1, %i4, %i1
/* Neither 8-byte nor 16-byte aligned, shift and mask. */
and %i4, 0x7, GLOBAL_SPARE
sll GLOBAL_SPARE, 3, GLOBAL_SPARE
mov 64, %i5
EX_LD(LOAD_TWIN(%i1, %g2, %g3), NG_ret_i2_plus_g1)
sub %i5, GLOBAL_SPARE, %i5
mov 16, %o4
mov 32, %o5
mov 48, %o7
mov 64, %i3
bg,pn %XCC, 9f
nop
#define MIX_THREE_WORDS(WORD1, WORD2, WORD3, PRE_SHIFT, POST_SHIFT, TMP) \
sllx WORD1, POST_SHIFT, WORD1; \
srlx WORD2, PRE_SHIFT, TMP; \
sllx WORD2, POST_SHIFT, WORD2; \
or WORD1, TMP, WORD1; \
srlx WORD3, PRE_SHIFT, TMP; \
or WORD2, TMP, WORD2;
8: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3), NG_ret_i2_plus_g1)
MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1)
LOAD(prefetch, %i1 + %i3, #one_read)
EX_ST(STORE_INIT(%g2, %o0 + 0x00), NG_ret_i2_plus_g1)
EX_ST(STORE_INIT(%g3, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8)
EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3), NG_ret_i2_plus_g1_minus_16)
MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o2, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16)
EX_ST(STORE_INIT(%o3, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24)
EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1_minus_32)
MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%g2, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32)
EX_ST(STORE_INIT(%g3, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40)
EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3), NG_ret_i2_plus_g1_minus_48)
add %i1, 64, %i1
MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o2, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48)
EX_ST(STORE_INIT(%o3, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56)
subcc %g1, 64, %g1
bne,pt %XCC, 8b
add %o0, 64, %o0
ba,pt %XCC, 60f
add %i1, %i4, %i1
9: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3), NG_ret_i2_plus_g1)
MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1)
LOAD(prefetch, %i1 + %i3, #one_read)
EX_ST(STORE_INIT(%g3, %o0 + 0x00), NG_ret_i2_plus_g1)
EX_ST(STORE_INIT(%o2, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8)
EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3), NG_ret_i2_plus_g1_minus_16)
MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o3, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16)
EX_ST(STORE_INIT(%g2, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24)
EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1_minus_32)
MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%g3, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32)
EX_ST(STORE_INIT(%o2, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40)
EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3), NG_ret_i2_plus_g1_minus_48)
add %i1, 64, %i1
MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o3, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48)
EX_ST(STORE_INIT(%g2, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56)
subcc %g1, 64, %g1
bne,pt %XCC, 9b
add %o0, 64, %o0
ba,pt %XCC, 60f
add %i1, %i4, %i1
10: /* Destination is 64-byte aligned, source was only 8-byte
* aligned but it has been subtracted by 8 and we perform
* one twin load ahead, then add 8 back into source when
* we finish the loop.
*/
EX_LD(LOAD_TWIN(%i1, %o4, %o5), NG_ret_i2_plus_g1)
mov 16, %o7
mov 32, %g2
mov 48, %g3
mov 64, %o1
1: EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1)
LOAD(prefetch, %i1 + %o1, #one_read)
EX_ST(STORE_INIT(%o5, %o0 + 0x00), NG_ret_i2_plus_g1) ! initializes cache line
EX_ST(STORE_INIT(%o2, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8)
EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5), NG_ret_i2_plus_g1_minus_16)
EX_ST(STORE_INIT(%o3, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16)
EX_ST(STORE_INIT(%o4, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24)
EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3), NG_ret_i2_plus_g1_minus_32)
EX_ST(STORE_INIT(%o5, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32)
EX_ST(STORE_INIT(%o2, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40)
EX_LD(LOAD_TWIN(%i1 + %o1, %o4, %o5), NG_ret_i2_plus_g1_minus_48)
add %i1, 64, %i1
EX_ST(STORE_INIT(%o3, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48)
EX_ST(STORE_INIT(%o4, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56)
subcc %g1, 64, %g1
bne,pt %XCC, 1b
add %o0, 64, %o0
ba,pt %XCC, 60f
add %i1, 0x8, %i1
50: /* Destination is 64-byte aligned, and source is 16-byte
* aligned.
*/
mov 16, %o7
mov 32, %g2
mov 48, %g3
mov 64, %o1
1: EX_LD(LOAD_TWIN(%i1 + %g0, %o4, %o5), NG_ret_i2_plus_g1)
EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1)
LOAD(prefetch, %i1 + %o1, #one_read)
EX_ST(STORE_INIT(%o4, %o0 + 0x00), NG_ret_i2_plus_g1) ! initializes cache line
EX_ST(STORE_INIT(%o5, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8)
EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5), NG_ret_i2_plus_g1_minus_16)
EX_ST(STORE_INIT(%o2, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16)
EX_ST(STORE_INIT(%o3, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24)
EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3), NG_ret_i2_plus_g1_minus_32)
add %i1, 64, %i1
EX_ST(STORE_INIT(%o4, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32)
EX_ST(STORE_INIT(%o5, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40)
EX_ST(STORE_INIT(%o2, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48)
EX_ST(STORE_INIT(%o3, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56)
subcc %g1, 64, %g1
bne,pt %XCC, 1b
add %o0, 64, %o0
/* fall through */
60:
membar #Sync
/* %i2 contains any final bytes still needed to be copied
* over. If anything is left, we copy it one byte at a time.
*/
RESTORE_ASI(%i3)
brz,pt %i2, 85f
sub %o0, %i1, %i3
ba,a,pt %XCC, 90f
nop
.align 64
70: /* 16 < len <= 64 */
bne,pn %XCC, 75f
sub %o0, %i1, %i3
72:
andn %i2, 0xf, %i4
and %i2, 0xf, %i2
1: subcc %i4, 0x10, %i4
EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_i4)
add %i1, 0x08, %i1
EX_LD(LOAD(ldx, %i1, %g1), NG_ret_i2_plus_i4)
sub %i1, 0x08, %i1
EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_i4)
add %i1, 0x8, %i1
EX_ST(STORE(stx, %g1, %i1 + %i3), NG_ret_i2_plus_i4_minus_8)
bgu,pt %XCC, 1b
add %i1, 0x8, %i1
73: andcc %i2, 0x8, %g0
be,pt %XCC, 1f
nop
sub %i2, 0x8, %i2
EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_8)
EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_8)
add %i1, 0x8, %i1
1: andcc %i2, 0x4, %g0
be,pt %XCC, 1f
nop
sub %i2, 0x4, %i2
EX_LD(LOAD(lduw, %i1, %i5), NG_ret_i2_plus_4)
EX_ST(STORE(stw, %i5, %i1 + %i3), NG_ret_i2_plus_4)
add %i1, 0x4, %i1
1: cmp %i2, 0
be,pt %XCC, 85f
nop
ba,pt %xcc, 90f
nop
75:
andcc %o0, 0x7, %g1
sub %g1, 0x8, %g1
be,pn %icc, 2f
sub %g0, %g1, %g1
sub %i2, %g1, %i2
1: subcc %g1, 1, %g1
EX_LD(LOAD(ldub, %i1, %i5), NG_ret_i2_plus_g1_plus_1)
EX_ST(STORE(stb, %i5, %i1 + %i3), NG_ret_i2_plus_g1_plus_1)
bgu,pt %icc, 1b
add %i1, 1, %i1
2: add %i1, %i3, %o0
andcc %i1, 0x7, %g1
bne,pt %icc, 8f
sll %g1, 3, %g1
cmp %i2, 16
bgeu,pt %icc, 72b
nop
ba,a,pt %xcc, 73b
8: mov 64, %i3
andn %i1, 0x7, %i1
EX_LD(LOAD(ldx, %i1, %g2), NG_ret_i2)
sub %i3, %g1, %i3
andn %i2, 0x7, %i4
sllx %g2, %g1, %g2
1: add %i1, 0x8, %i1
EX_LD(LOAD(ldx, %i1, %g3), NG_ret_i2_and_7_plus_i4)
subcc %i4, 0x8, %i4
srlx %g3, %i3, %i5
or %i5, %g2, %i5
EX_ST(STORE(stx, %i5, %o0), NG_ret_i2_and_7_plus_i4)
add %o0, 0x8, %o0
bgu,pt %icc, 1b
sllx %g3, %g1, %g2
srl %g1, 3, %g1
andcc %i2, 0x7, %i2
be,pn %icc, 85f
add %i1, %g1, %i1
ba,pt %xcc, 90f
sub %o0, %i1, %i3
.align 64
80: /* 0 < len <= 16 */
andcc %i3, 0x3, %g0
bne,pn %XCC, 90f
sub %o0, %i1, %i3
1:
subcc %i2, 4, %i2
EX_LD(LOAD(lduw, %i1, %g1), NG_ret_i2_plus_4)
EX_ST(STORE(stw, %g1, %i1 + %i3), NG_ret_i2_plus_4)
bgu,pt %XCC, 1b
add %i1, 4, %i1
85: ret
restore EX_RETVAL(%i0), %g0, %o0
.align 32
90:
subcc %i2, 1, %i2
EX_LD(LOAD(ldub, %i1, %g1), NG_ret_i2_plus_1)
EX_ST(STORE(stb, %g1, %i1 + %i3), NG_ret_i2_plus_1)
bgu,pt %XCC, 90b
add %i1, 1, %i1
ret
restore EX_RETVAL(%i0), %g0, %o0
.size FUNC_NAME, .-FUNC_NAME