linux/arch/blackfin/mach-bf518/Kconfig
Mike Frysinger 65cd3b5362 Blackfin: bf51x: fix alternative portmux options
The BF51x's alternative portmux Kconfig options were copy & pasted from
the BF52x, but never tweaked to reflect it.  So drop the old options as
they were never used (and were simply wrong), and add the BF51x specific
pieces to the Kconfig and header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:32 -04:00

320 lines
6.3 KiB
Plaintext

config BF51x
def_bool y
depends on (BF512 || BF514 || BF516 || BF518)
if (BF51x)
source "arch/blackfin/mach-bf518/boards/Kconfig"
menu "BF518 Specific Configuration"
comment "Alternative Multiplexing Scheme"
choice
prompt "PWM Channel Pins"
default BF518_PWM_ALL_PORTF
help
Select pins used for the PWM channels:
PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL
See the Hardware Reference Manual for more details.
config BF518_PWM_ALL_PORTF
bool "PF1 - PF6"
help
PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL}
config BF518_PWM_PORTF_PORTG
bool "PF11 - PF14 / PG1 - PG2"
help
PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL}
PG{1,2} <-> PWM_{CH,CL}
endchoice
choice
prompt "PWM Sync Pin"
default BF518_PWM_SYNC_PF7
help
Select the pin used for PWM_SYNC.
See the Hardware Reference Manual for more details.
config BF518_PWM_SYNC_PF7
bool "PF7"
config BF518_PWM_SYNC_PF15
bool "PF15"
endchoice
choice
prompt "PWM Trip B Pin"
default BF518_PWM_TRIPB_PG10
help
Select the pin used for PWM_TRIPB.
See the Hardware Reference Manual for more details.
config BF518_PWM_TRIPB_PG10
bool "PG10"
config BF518_PWM_TRIPB_PG14
bool "PG14"
endchoice
choice
prompt "PPI / Timer Pins"
default BF518_PPI_TMR_PG5
help
Select pins used for PPI/Timer:
PPICLK PPIFS1 PPIFS2
TMRCLK TMR0 TMR1
See the Hardware Reference Manual for more details.
config BF518_PPI_TMR_PG5
bool "PG5 - PG7"
help
PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
config BF518_PPI_TMR_PG12
bool "PG12 - PG14"
help
PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
endchoice
comment "Hysteresis/Schmitt Trigger Control"
config BFIN_HYSTERESIS_CONTROL
bool "Enable Hysteresis Control"
help
The ADSP-BF51x allows to control input hysteresis for Port F,
Port G and Port H and other processor signal inputs.
The Schmitt trigger enables can be set only for pin groups.
Saying Y will overwrite the default reset or boot loader
initialization.
menu "PORT F"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTF_0_7
bool "Enable Hysteresis on PORTF {0...7}"
config GPIO_HYST_PORTF_8_9
bool "Enable Hysteresis on PORTF {8, 9}"
config GPIO_HYST_PORTF_10
bool "Enable Hysteresis on PORTF 10"
config GPIO_HYST_PORTF_11
bool "Enable Hysteresis on PORTF 11"
config GPIO_HYST_PORTF_12_13
bool "Enable Hysteresis on PORTF {12, 13}"
config GPIO_HYST_PORTF_14_15
bool "Enable Hysteresis on PORTF {14, 15}"
endmenu
menu "PORT G"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTG_0
bool "Enable Hysteresis on PORTG 0"
config GPIO_HYST_PORTG_1_4
bool "Enable Hysteresis on PORTG {1...4}"
config GPIO_HYST_PORTG_5_6
bool "Enable Hysteresis on PORTG {5, 6}"
config GPIO_HYST_PORTG_7_8
bool "Enable Hysteresis on PORTG {7, 8}"
config GPIO_HYST_PORTG_9
bool "Enable Hysteresis on PORTG 9"
config GPIO_HYST_PORTG_10
bool "Enable Hysteresis on PORTG 10"
config GPIO_HYST_PORTG_11_13
bool "Enable Hysteresis on PORTG {11...13}"
config GPIO_HYST_PORTG_14_15
bool "Enable Hysteresis on PORTG {14, 15}"
endmenu
menu "PORT H"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTH_0_7
bool "Enable Hysteresis on PORTH {0...7}"
endmenu
menu "None-GPIO"
depends on BFIN_HYSTERESIS_CONTROL
config NONEGPIO_HYST_NMI_RST_BMODE
bool "Enable Hysteresis on {NMI, RESET, BMODE}"
config NONEGPIO_HYST_JTAG
bool "Enable Hysteresis on JTAG"
endmenu
comment "Interrupt Priority Assignment"
menu "Priority"
config IRQ_PLL_WAKEUP
int "IRQ_PLL_WAKEUP"
default 7
config IRQ_DMA0_ERROR
int "IRQ_DMA0_ERROR"
default 7
config IRQ_DMAR0_BLK
int "IRQ_DMAR0_BLK"
default 7
config IRQ_DMAR1_BLK
int "IRQ_DMAR1_BLK"
default 7
config IRQ_DMAR0_OVR
int "IRQ_DMAR0_OVR"
default 7
config IRQ_DMAR1_OVR
int "IRQ_DMAR1_OVR"
default 7
config IRQ_PPI_ERROR
int "IRQ_PPI_ERROR"
default 7
config IRQ_MAC_ERROR
int "IRQ_MAC_ERROR"
default 7
config IRQ_SPORT0_ERROR
int "IRQ_SPORT0_ERROR"
default 7
config IRQ_SPORT1_ERROR
int "IRQ_SPORT1_ERROR"
default 7
config IRQ_PTP_ERROR
int "IRQ_PTP_ERROR"
default 7
config IRQ_UART0_ERROR
int "IRQ_UART0_ERROR"
default 7
config IRQ_UART1_ERROR
int "IRQ_UART1_ERROR"
default 7
config IRQ_RTC
int "IRQ_RTC"
default 8
config IRQ_PPI
int "IRQ_PPI"
default 8
config IRQ_SPORT0_RX
int "IRQ_SPORT0_RX"
default 9
config IRQ_SPORT0_TX
int "IRQ_SPORT0_TX"
default 9
config IRQ_SPORT1_RX
int "IRQ_SPORT1_RX"
default 9
config IRQ_SPORT1_TX
int "IRQ_SPORT1_TX"
default 9
config IRQ_TWI
int "IRQ_TWI"
default 10
config IRQ_SPI0
int "IRQ_SPI"
default 10
config IRQ_UART0_RX
int "IRQ_UART0_RX"
default 10
config IRQ_UART0_TX
int "IRQ_UART0_TX"
default 10
config IRQ_UART1_RX
int "IRQ_UART1_RX"
default 10
config IRQ_UART1_TX
int "IRQ_UART1_TX"
default 10
config IRQ_OPTSEC
int "IRQ_OPTSEC"
default 11
config IRQ_CNT
int "IRQ_CNT"
default 11
config IRQ_MAC_RX
int "IRQ_MAC_RX"
default 11
config IRQ_PORTH_INTA
int "IRQ_PORTH_INTA"
default 11
config IRQ_MAC_TX
int "IRQ_MAC_TX/NFC"
default 11
config IRQ_PORTH_INTB
int "IRQ_PORTH_INTB"
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "IRQ_TIMER1"
default 12
config IRQ_TIMER2
int "IRQ_TIMER2"
default 12
config IRQ_TIMER3
int "IRQ_TIMER3"
default 12
config IRQ_TIMER4
int "IRQ_TIMER4"
default 12
config IRQ_TIMER5
int "IRQ_TIMER5"
default 12
config IRQ_TIMER6
int "IRQ_TIMER6"
default 12
config IRQ_TIMER7
int "IRQ_TIMER7"
default 12
config IRQ_PORTG_INTA
int "IRQ_PORTG_INTA"
default 12
config IRQ_PORTG_INTB
int "IRQ_PORTG_INTB"
default 12
config IRQ_MEM_DMA0
int "IRQ_MEM_DMA0"
default 13
config IRQ_MEM_DMA1
int "IRQ_MEM_DMA1"
default 13
config IRQ_WATCH
int "IRQ_WATCH"
default 13
config IRQ_PORTF_INTA
int "IRQ_PORTF_INTA"
default 13
config IRQ_PORTF_INTB
int "IRQ_PORTF_INTB"
default 13
config IRQ_SPI0_ERROR
int "IRQ_SPI0_ERROR"
default 7
config IRQ_SPI1_ERROR
int "IRQ_SPI1_ERROR"
default 7
config IRQ_RSI_INT0
int "IRQ_RSI_INT0"
default 7
config IRQ_RSI_INT1
int "IRQ_RSI_INT1"
default 7
config IRQ_PWM_TRIP
int "IRQ_PWM_TRIP"
default 10
config IRQ_PWM_SYNC
int "IRQ_PWM_SYNC"
default 10
config IRQ_PTP_STAT
int "IRQ_PTP_STAT"
default 10
help
Enter the priority numbers between 7-13 ONLY. Others are Reserved.
This applies to all the above. It is not recommended to assign the
highest priority number 7 to UART or any other device.
endmenu
endmenu
endif