linux/drivers/iommu/amd_iommu_init.c
Linus Torvalds 6eae81a5e2 IOMMU Updates for Linux v4.2
This time with bigger changes than usual:
 
 	* A new IOMMU driver for the ARM SMMUv3. This IOMMU is pretty
 	  different from SMMUv1 and v2 in that it is configured through
 	  in-memory structures and not through the MMIO register region.
 	  The ARM SMMUv3 also supports IO demand paging for PCI devices
 	  with PRI/PASID capabilities, but this is not implemented in
 	  the driver yet.
 
 	* Lots of cleanups and device-tree support for the Exynos IOMMU
 	  driver. This is part of the effort to bring Exynos DRM support
 	  upstream.
 
 	* Introduction of default domains into the IOMMU core code. The
 	  rationale behind this is to move functionalily out of the
 	  IOMMU drivers to common code to get to a unified behavior
 	  between different drivers.
 	  The patches here introduce a default domain for iommu-groups
 	  (isolation groups). A device will now always be attached to a
 	  domain, either the default domain or another domain handled by
 	  the device driver. The IOMMU drivers have to be modified to
 	  make use of that feature. So long the AMD IOMMU driver is
 	  converted, with others to follow.
 
 	* Patches for the Intel VT-d drvier to fix DMAR faults that
 	  happen when a kdump kernel boots. When the kdump kernel boots
 	  it re-initializes the IOMMU hardware, which destroys all
 	  mappings from the crashed kernel. As this happens before
 	  the endpoint devices are re-initialized, any in-flight DMA
 	  causes a DMAR fault. These faults cause PCI master aborts,
 	  which some devices can't handle properly and go into an
 	  undefined state, so that the device driver in the kdump kernel
 	  fails to initialize them and the dump fails.
 	  This is now fixed by copying over the mapping structures (only
 	  context tables and interrupt remapping tables) from the old
 	  kernel and keep the old mappings in place until the device
 	  driver of the new kernel takes over. This emulates the the
 	  behavior without an IOMMU to the best degree possible.
 
 	* A couple of other small fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJViSIWAAoJECvwRC2XARrjl+cP/2FXS7SWDq91VFiIZfXfPt8H
 C5Ef3OGWCnMzn4MKE1ExkyDhC+AH6pF1s4zi3XfT6b8iOA+DUpa51rxJjixszt31
 tQwmvB7hWu4mznGxSN7EA0Pm0l/v3tBAY5BvG598af0aNZFFJ6po+31MyQA5X67+
 6xpqLbH/hm4IZhFBOEzZwxuWWsNxlJwwzKqeAjGyqeUhdruRYZiPHWQ17sDjwLM/
 QcVvWBb7meOtKv1OCtpzC4sglSk3scbAfEHMEBuDt8cI6OD7/t2VzPXDWWZuXGqK
 nRAxCT7NrXvyOnv0xwdn0j5p1FUGipVxvhsGWX7sJsh3UHWm8Q+5rRKFFVI9pm50
 QcMjiIMazK5VwcAkDnLoDgSz4Zz6TfHXEOqSJ2vjTPt2VDP/J9zdM2iwHx2ujicI
 mIkrtmsBprvAPx6e9jcqiS5L/Xy1y1xewXuGxa5F2XOjqdoXkPqaupjlyrWzrChA
 MC8w67FdzjHDPCfIqfIWZpJQj4f1OFQGd3HS5HpkBACxIwCg85gRw4DEMfD/sirO
 BL2VM0RO/bB5+4R0AY7UA2VszQvNMqedj1bA4vAbrnXqOh8BI/0GgeoWiBMXhyX1
 qvT1jl+cxuCm5tgBOMUGYoRyF+//bH+l78jLsTYaWRtuVzFlkAX6idNvYYK0dmNt
 tLII2IIZBk87P3pF4d6A
 =Zicw
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This time with bigger changes than usual:

   - A new IOMMU driver for the ARM SMMUv3.

     This IOMMU is pretty different from SMMUv1 and v2 in that it is
     configured through in-memory structures and not through the MMIO
     register region.  The ARM SMMUv3 also supports IO demand paging for
     PCI devices with PRI/PASID capabilities, but this is not
     implemented in the driver yet.

   - Lots of cleanups and device-tree support for the Exynos IOMMU
     driver.  This is part of the effort to bring Exynos DRM support
     upstream.

   - Introduction of default domains into the IOMMU core code.

     The rationale behind this is to move functionalily out of the IOMMU
     drivers to common code to get to a unified behavior between
     different drivers.  The patches here introduce a default domain for
     iommu-groups (isolation groups).

     A device will now always be attached to a domain, either the
     default domain or another domain handled by the device driver.  The
     IOMMU drivers have to be modified to make use of that feature.  So
     long the AMD IOMMU driver is converted, with others to follow.

   - Patches for the Intel VT-d drvier to fix DMAR faults that happen
     when a kdump kernel boots.

     When the kdump kernel boots it re-initializes the IOMMU hardware,
     which destroys all mappings from the crashed kernel.  As this
     happens before the endpoint devices are re-initialized, any
     in-flight DMA causes a DMAR fault.  These faults cause PCI master
     aborts, which some devices can't handle properly and go into an
     undefined state, so that the device driver in the kdump kernel
     fails to initialize them and the dump fails.

     This is now fixed by copying over the mapping structures (only
     context tables and interrupt remapping tables) from the old kernel
     and keep the old mappings in place until the device driver of the
     new kernel takes over.  This emulates the the behavior without an
     IOMMU to the best degree possible.

   - A couple of other small fixes and cleanups"

* tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (69 commits)
  iommu/amd: Handle large pages correctly in free_pagetable
  iommu/vt-d: Don't disable IR when it was previously enabled
  iommu/vt-d: Make sure copied over IR entries are not reused
  iommu/vt-d: Copy IR table from old kernel when in kdump mode
  iommu/vt-d: Set IRTA in intel_setup_irq_remapping
  iommu/vt-d: Disable IRQ remapping in intel_prepare_irq_remapping
  iommu/vt-d: Move QI initializationt to intel_setup_irq_remapping
  iommu/vt-d: Move EIM detection to intel_prepare_irq_remapping
  iommu/vt-d: Enable Translation only if it was previously disabled
  iommu/vt-d: Don't disable translation prior to OS handover
  iommu/vt-d: Don't copy translation tables if RTT bit needs to be changed
  iommu/vt-d: Don't do early domain assignment if kdump kernel
  iommu/vt-d: Allocate si_domain in init_dmars()
  iommu/vt-d: Mark copied context entries
  iommu/vt-d: Do not re-use domain-ids from the old kernel
  iommu/vt-d: Copy translation tables from old kernel
  iommu/vt-d: Detect pre enabled translation
  iommu/vt-d: Make root entry visible for hardware right after allocation
  iommu/vt-d: Init QI before root entry is allocated
  iommu/vt-d: Cleanup log messages
  ...
2015-06-23 18:27:19 -07:00

2396 lines
58 KiB
C

/*
* Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
* Author: Joerg Roedel <jroedel@suse.de>
* Leo Duran <leo.duran@amd.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/msi.h>
#include <linux/amd-iommu.h>
#include <linux/export.h>
#include <linux/iommu.h>
#include <asm/pci-direct.h>
#include <asm/iommu.h>
#include <asm/gart.h>
#include <asm/x86_init.h>
#include <asm/iommu_table.h>
#include <asm/io_apic.h>
#include <asm/irq_remapping.h>
#include "amd_iommu_proto.h"
#include "amd_iommu_types.h"
#include "irq_remapping.h"
/*
* definitions for the ACPI scanning code
*/
#define IVRS_HEADER_LENGTH 48
#define ACPI_IVHD_TYPE 0x10
#define ACPI_IVMD_TYPE_ALL 0x20
#define ACPI_IVMD_TYPE 0x21
#define ACPI_IVMD_TYPE_RANGE 0x22
#define IVHD_DEV_ALL 0x01
#define IVHD_DEV_SELECT 0x02
#define IVHD_DEV_SELECT_RANGE_START 0x03
#define IVHD_DEV_RANGE_END 0x04
#define IVHD_DEV_ALIAS 0x42
#define IVHD_DEV_ALIAS_RANGE 0x43
#define IVHD_DEV_EXT_SELECT 0x46
#define IVHD_DEV_EXT_SELECT_RANGE 0x47
#define IVHD_DEV_SPECIAL 0x48
#define IVHD_SPECIAL_IOAPIC 1
#define IVHD_SPECIAL_HPET 2
#define IVHD_FLAG_HT_TUN_EN_MASK 0x01
#define IVHD_FLAG_PASSPW_EN_MASK 0x02
#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04
#define IVHD_FLAG_ISOC_EN_MASK 0x08
#define IVMD_FLAG_EXCL_RANGE 0x08
#define IVMD_FLAG_UNITY_MAP 0x01
#define ACPI_DEVFLAG_INITPASS 0x01
#define ACPI_DEVFLAG_EXTINT 0x02
#define ACPI_DEVFLAG_NMI 0x04
#define ACPI_DEVFLAG_SYSMGT1 0x10
#define ACPI_DEVFLAG_SYSMGT2 0x20
#define ACPI_DEVFLAG_LINT0 0x40
#define ACPI_DEVFLAG_LINT1 0x80
#define ACPI_DEVFLAG_ATSDIS 0x10000000
/*
* ACPI table definitions
*
* These data structures are laid over the table to parse the important values
* out of it.
*/
/*
* structure describing one IOMMU in the ACPI table. Typically followed by one
* or more ivhd_entrys.
*/
struct ivhd_header {
u8 type;
u8 flags;
u16 length;
u16 devid;
u16 cap_ptr;
u64 mmio_phys;
u16 pci_seg;
u16 info;
u32 efr;
} __attribute__((packed));
/*
* A device entry describing which devices a specific IOMMU translates and
* which requestor ids they use.
*/
struct ivhd_entry {
u8 type;
u16 devid;
u8 flags;
u32 ext;
} __attribute__((packed));
/*
* An AMD IOMMU memory definition structure. It defines things like exclusion
* ranges for devices and regions that should be unity mapped.
*/
struct ivmd_header {
u8 type;
u8 flags;
u16 length;
u16 devid;
u16 aux;
u64 resv;
u64 range_start;
u64 range_length;
} __attribute__((packed));
bool amd_iommu_dump;
bool amd_iommu_irq_remap __read_mostly;
static bool amd_iommu_detected;
static bool __initdata amd_iommu_disabled;
u16 amd_iommu_last_bdf; /* largest PCI device id we have
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
u32 amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
/* Array to assign indices to IOMMUs*/
struct amd_iommu *amd_iommus[MAX_IOMMUS];
int amd_iommus_present;
/* IOMMUs have a non-present cache? */
bool amd_iommu_np_cache __read_mostly;
bool amd_iommu_iotlb_sup __read_mostly = true;
u32 amd_iommu_max_pasid __read_mostly = ~0;
bool amd_iommu_v2_present __read_mostly;
bool amd_iommu_pc_present __read_mostly;
bool amd_iommu_force_isolation __read_mostly;
/*
* List of protection domains - used during resume
*/
LIST_HEAD(amd_iommu_pd_list);
spinlock_t amd_iommu_pd_lock;
/*
* Pointer to the device table which is shared by all AMD IOMMUs
* it is indexed by the PCI device id or the HT unit id and contains
* information about the domain the device belongs to as well as the
* page table root pointer.
*/
struct dev_table_entry *amd_iommu_dev_table;
/*
* The alias table is a driver specific data structure which contains the
* mappings of the PCI device ids to the actual requestor ids on the IOMMU.
* More than one device can share the same requestor id.
*/
u16 *amd_iommu_alias_table;
/*
* The rlookup table is used to find the IOMMU which is responsible
* for a specific device. It is also indexed by the PCI device id.
*/
struct amd_iommu **amd_iommu_rlookup_table;
/*
* This table is used to find the irq remapping table for a given device id
* quickly.
*/
struct irq_remap_table **irq_lookup_table;
/*
* AMD IOMMU allows up to 2^16 different protection domains. This is a bitmap
* to know which ones are already in use.
*/
unsigned long *amd_iommu_pd_alloc_bitmap;
static u32 dev_table_size; /* size of the device table */
static u32 alias_table_size; /* size of the alias table */
static u32 rlookup_table_size; /* size if the rlookup table */
enum iommu_init_state {
IOMMU_START_STATE,
IOMMU_IVRS_DETECTED,
IOMMU_ACPI_FINISHED,
IOMMU_ENABLED,
IOMMU_PCI_INIT,
IOMMU_INTERRUPTS_EN,
IOMMU_DMA_OPS,
IOMMU_INITIALIZED,
IOMMU_NOT_FOUND,
IOMMU_INIT_ERROR,
};
/* Early ioapic and hpet maps from kernel command line */
#define EARLY_MAP_SIZE 4
static struct devid_map __initdata early_ioapic_map[EARLY_MAP_SIZE];
static struct devid_map __initdata early_hpet_map[EARLY_MAP_SIZE];
static int __initdata early_ioapic_map_size;
static int __initdata early_hpet_map_size;
static bool __initdata cmdline_maps;
static enum iommu_init_state init_state = IOMMU_START_STATE;
static int amd_iommu_enable_interrupts(void);
static int __init iommu_go_to_state(enum iommu_init_state state);
static void init_device_table_dma(void);
static inline void update_last_devid(u16 devid)
{
if (devid > amd_iommu_last_bdf)
amd_iommu_last_bdf = devid;
}
static inline unsigned long tbl_size(int entry_size)
{
unsigned shift = PAGE_SHIFT +
get_order(((int)amd_iommu_last_bdf + 1) * entry_size);
return 1UL << shift;
}
/* Access to l1 and l2 indexed register spaces */
static u32 iommu_read_l1(struct amd_iommu *iommu, u16 l1, u8 address)
{
u32 val;
pci_write_config_dword(iommu->dev, 0xf8, (address | l1 << 16));
pci_read_config_dword(iommu->dev, 0xfc, &val);
return val;
}
static void iommu_write_l1(struct amd_iommu *iommu, u16 l1, u8 address, u32 val)
{
pci_write_config_dword(iommu->dev, 0xf8, (address | l1 << 16 | 1 << 31));
pci_write_config_dword(iommu->dev, 0xfc, val);
pci_write_config_dword(iommu->dev, 0xf8, (address | l1 << 16));
}
static u32 iommu_read_l2(struct amd_iommu *iommu, u8 address)
{
u32 val;
pci_write_config_dword(iommu->dev, 0xf0, address);
pci_read_config_dword(iommu->dev, 0xf4, &val);
return val;
}
static void iommu_write_l2(struct amd_iommu *iommu, u8 address, u32 val)
{
pci_write_config_dword(iommu->dev, 0xf0, (address | 1 << 8));
pci_write_config_dword(iommu->dev, 0xf4, val);
}
/****************************************************************************
*
* AMD IOMMU MMIO register space handling functions
*
* These functions are used to program the IOMMU device registers in
* MMIO space required for that driver.
*
****************************************************************************/
/*
* This function set the exclusion range in the IOMMU. DMA accesses to the
* exclusion range are passed through untranslated
*/
static void iommu_set_exclusion_range(struct amd_iommu *iommu)
{
u64 start = iommu->exclusion_start & PAGE_MASK;
u64 limit = (start + iommu->exclusion_length) & PAGE_MASK;
u64 entry;
if (!iommu->exclusion_start)
return;
entry = start | MMIO_EXCL_ENABLE_MASK;
memcpy_toio(iommu->mmio_base + MMIO_EXCL_BASE_OFFSET,
&entry, sizeof(entry));
entry = limit;
memcpy_toio(iommu->mmio_base + MMIO_EXCL_LIMIT_OFFSET,
&entry, sizeof(entry));
}
/* Programs the physical address of the device table into the IOMMU hardware */
static void iommu_set_device_table(struct amd_iommu *iommu)
{
u64 entry;
BUG_ON(iommu->mmio_base == NULL);
entry = virt_to_phys(amd_iommu_dev_table);
entry |= (dev_table_size >> 12) - 1;
memcpy_toio(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET,
&entry, sizeof(entry));
}
/* Generic functions to enable/disable certain features of the IOMMU. */
static void iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
{
u32 ctrl;
ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
ctrl |= (1 << bit);
writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
{
u32 ctrl;
ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
ctrl &= ~(1 << bit);
writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
static void iommu_set_inv_tlb_timeout(struct amd_iommu *iommu, int timeout)
{
u32 ctrl;
ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
ctrl &= ~CTRL_INV_TO_MASK;
ctrl |= (timeout << CONTROL_INV_TIMEOUT) & CTRL_INV_TO_MASK;
writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
/* Function to enable the hardware */
static void iommu_enable(struct amd_iommu *iommu)
{
iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
}
static void iommu_disable(struct amd_iommu *iommu)
{
/* Disable command buffer */
iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
/* Disable event logging and event interrupts */
iommu_feature_disable(iommu, CONTROL_EVT_INT_EN);
iommu_feature_disable(iommu, CONTROL_EVT_LOG_EN);
/* Disable IOMMU hardware itself */
iommu_feature_disable(iommu, CONTROL_IOMMU_EN);
}
/*
* mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in
* the system has one.
*/
static u8 __iomem * __init iommu_map_mmio_space(u64 address, u64 end)
{
if (!request_mem_region(address, end, "amd_iommu")) {
pr_err("AMD-Vi: Can not reserve memory region %llx-%llx for mmio\n",
address, end);
pr_err("AMD-Vi: This is a BIOS bug. Please contact your hardware vendor\n");
return NULL;
}
return (u8 __iomem *)ioremap_nocache(address, end);
}
static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
{
if (iommu->mmio_base)
iounmap(iommu->mmio_base);
release_mem_region(iommu->mmio_phys, iommu->mmio_phys_end);
}
/****************************************************************************
*
* The functions below belong to the first pass of AMD IOMMU ACPI table
* parsing. In this pass we try to find out the highest device id this
* code has to handle. Upon this information the size of the shared data
* structures is determined later.
*
****************************************************************************/
/*
* This function calculates the length of a given IVHD entry
*/
static inline int ivhd_entry_length(u8 *ivhd)
{
return 0x04 << (*ivhd >> 6);
}
/*
* This function reads the last device id the IOMMU has to handle from the PCI
* capability header for this IOMMU
*/
static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr)
{
u32 cap;
cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
update_last_devid(PCI_DEVID(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
return 0;
}
/*
* After reading the highest device id from the IOMMU PCI capability header
* this function looks if there is a higher device id defined in the ACPI table
*/
static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
{
u8 *p = (void *)h, *end = (void *)h;
struct ivhd_entry *dev;
p += sizeof(*h);
end += h->length;
find_last_devid_on_pci(PCI_BUS_NUM(h->devid),
PCI_SLOT(h->devid),
PCI_FUNC(h->devid),
h->cap_ptr);
while (p < end) {
dev = (struct ivhd_entry *)p;
switch (dev->type) {
case IVHD_DEV_SELECT:
case IVHD_DEV_RANGE_END:
case IVHD_DEV_ALIAS:
case IVHD_DEV_EXT_SELECT:
/* all the above subfield types refer to device ids */
update_last_devid(dev->devid);
break;
default:
break;
}
p += ivhd_entry_length(p);
}
WARN_ON(p != end);
return 0;
}
/*
* Iterate over all IVHD entries in the ACPI table and find the highest device
* id which we need to handle. This is the first of three functions which parse
* the ACPI table. So we check the checksum here.
*/
static int __init find_last_devid_acpi(struct acpi_table_header *table)
{
int i;
u8 checksum = 0, *p = (u8 *)table, *end = (u8 *)table;
struct ivhd_header *h;
/*
* Validate checksum here so we don't need to do it when
* we actually parse the table
*/
for (i = 0; i < table->length; ++i)
checksum += p[i];
if (checksum != 0)
/* ACPI table corrupt */
return -ENODEV;
p += IVRS_HEADER_LENGTH;
end += table->length;
while (p < end) {
h = (struct ivhd_header *)p;
switch (h->type) {
case ACPI_IVHD_TYPE:
find_last_devid_from_ivhd(h);
break;
default:
break;
}
p += h->length;
}
WARN_ON(p != end);
return 0;
}
/****************************************************************************
*
* The following functions belong to the code path which parses the ACPI table
* the second time. In this ACPI parsing iteration we allocate IOMMU specific
* data structures, initialize the device/alias/rlookup table and also
* basically initialize the hardware.
*
****************************************************************************/
/*
* Allocates the command buffer. This buffer is per AMD IOMMU. We can
* write commands to that buffer later and the IOMMU will execute them
* asynchronously
*/
static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
{
u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(CMD_BUFFER_SIZE));
if (cmd_buf == NULL)
return NULL;
iommu->cmd_buf_size = CMD_BUFFER_SIZE | CMD_BUFFER_UNINITIALIZED;
return cmd_buf;
}
/*
* This function resets the command buffer if the IOMMU stopped fetching
* commands from it.
*/
void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu)
{
iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
}
/*
* This function writes the command buffer address to the hardware and
* enables it.
*/
static void iommu_enable_command_buffer(struct amd_iommu *iommu)
{
u64 entry;
BUG_ON(iommu->cmd_buf == NULL);
entry = (u64)virt_to_phys(iommu->cmd_buf);
entry |= MMIO_CMD_SIZE_512;
memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
&entry, sizeof(entry));
amd_iommu_reset_cmd_buffer(iommu);
iommu->cmd_buf_size &= ~(CMD_BUFFER_UNINITIALIZED);
}
static void __init free_command_buffer(struct amd_iommu *iommu)
{
free_pages((unsigned long)iommu->cmd_buf,
get_order(iommu->cmd_buf_size & ~(CMD_BUFFER_UNINITIALIZED)));
}
/* allocates the memory where the IOMMU will log its events to */
static u8 * __init alloc_event_buffer(struct amd_iommu *iommu)
{
iommu->evt_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(EVT_BUFFER_SIZE));
if (iommu->evt_buf == NULL)
return NULL;
iommu->evt_buf_size = EVT_BUFFER_SIZE;
return iommu->evt_buf;
}
static void iommu_enable_event_buffer(struct amd_iommu *iommu)
{
u64 entry;
BUG_ON(iommu->evt_buf == NULL);
entry = (u64)virt_to_phys(iommu->evt_buf) | EVT_LEN_MASK;
memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET,
&entry, sizeof(entry));
/* set head and tail to zero manually */
writel(0x00, iommu->mmio_base + MMIO_EVT_HEAD_OFFSET);
writel(0x00, iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
}
static void __init free_event_buffer(struct amd_iommu *iommu)
{
free_pages((unsigned long)iommu->evt_buf, get_order(EVT_BUFFER_SIZE));
}
/* allocates the memory where the IOMMU will log its events to */
static u8 * __init alloc_ppr_log(struct amd_iommu *iommu)
{
iommu->ppr_log = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(PPR_LOG_SIZE));
if (iommu->ppr_log == NULL)
return NULL;
return iommu->ppr_log;
}
static void iommu_enable_ppr_log(struct amd_iommu *iommu)
{
u64 entry;
if (iommu->ppr_log == NULL)
return;
entry = (u64)virt_to_phys(iommu->ppr_log) | PPR_LOG_SIZE_512;
memcpy_toio(iommu->mmio_base + MMIO_PPR_LOG_OFFSET,
&entry, sizeof(entry));
/* set head and tail to zero manually */
writel(0x00, iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
writel(0x00, iommu->mmio_base + MMIO_PPR_TAIL_OFFSET);
iommu_feature_enable(iommu, CONTROL_PPFLOG_EN);
iommu_feature_enable(iommu, CONTROL_PPR_EN);
}
static void __init free_ppr_log(struct amd_iommu *iommu)
{
if (iommu->ppr_log == NULL)
return;
free_pages((unsigned long)iommu->ppr_log, get_order(PPR_LOG_SIZE));
}
static void iommu_enable_gt(struct amd_iommu *iommu)
{
if (!iommu_feature(iommu, FEATURE_GT))
return;
iommu_feature_enable(iommu, CONTROL_GT_EN);
}
/* sets a specific bit in the device table entry. */
static void set_dev_entry_bit(u16 devid, u8 bit)
{
int i = (bit >> 6) & 0x03;
int _bit = bit & 0x3f;
amd_iommu_dev_table[devid].data[i] |= (1UL << _bit);
}
static int get_dev_entry_bit(u16 devid, u8 bit)
{
int i = (bit >> 6) & 0x03;
int _bit = bit & 0x3f;
return (amd_iommu_dev_table[devid].data[i] & (1UL << _bit)) >> _bit;
}
void amd_iommu_apply_erratum_63(u16 devid)
{
int sysmgt;
sysmgt = get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1) |
(get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2) << 1);
if (sysmgt == 0x01)
set_dev_entry_bit(devid, DEV_ENTRY_IW);
}
/* Writes the specific IOMMU for a device into the rlookup table */
static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
{
amd_iommu_rlookup_table[devid] = iommu;
}
/*
* This function takes the device specific flags read from the ACPI
* table and sets up the device table entry with that information
*/
static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu,
u16 devid, u32 flags, u32 ext_flags)
{
if (flags & ACPI_DEVFLAG_INITPASS)
set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS);
if (flags & ACPI_DEVFLAG_EXTINT)
set_dev_entry_bit(devid, DEV_ENTRY_EINT_PASS);
if (flags & ACPI_DEVFLAG_NMI)
set_dev_entry_bit(devid, DEV_ENTRY_NMI_PASS);
if (flags & ACPI_DEVFLAG_SYSMGT1)
set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1);
if (flags & ACPI_DEVFLAG_SYSMGT2)
set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2);
if (flags & ACPI_DEVFLAG_LINT0)
set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS);
if (flags & ACPI_DEVFLAG_LINT1)
set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
amd_iommu_apply_erratum_63(devid);
set_iommu_for_device(iommu, devid);
}
static int __init add_special_device(u8 type, u8 id, u16 *devid, bool cmd_line)
{
struct devid_map *entry;
struct list_head *list;
if (type == IVHD_SPECIAL_IOAPIC)
list = &ioapic_map;
else if (type == IVHD_SPECIAL_HPET)
list = &hpet_map;
else
return -EINVAL;
list_for_each_entry(entry, list, list) {
if (!(entry->id == id && entry->cmd_line))
continue;
pr_info("AMD-Vi: Command-line override present for %s id %d - ignoring\n",
type == IVHD_SPECIAL_IOAPIC ? "IOAPIC" : "HPET", id);
*devid = entry->devid;
return 0;
}
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry)
return -ENOMEM;
entry->id = id;
entry->devid = *devid;
entry->cmd_line = cmd_line;
list_add_tail(&entry->list, list);
return 0;
}
static int __init add_early_maps(void)
{
int i, ret;
for (i = 0; i < early_ioapic_map_size; ++i) {
ret = add_special_device(IVHD_SPECIAL_IOAPIC,
early_ioapic_map[i].id,
&early_ioapic_map[i].devid,
early_ioapic_map[i].cmd_line);
if (ret)
return ret;
}
for (i = 0; i < early_hpet_map_size; ++i) {
ret = add_special_device(IVHD_SPECIAL_HPET,
early_hpet_map[i].id,
&early_hpet_map[i].devid,
early_hpet_map[i].cmd_line);
if (ret)
return ret;
}
return 0;
}
/*
* Reads the device exclusion range from ACPI and initializes the IOMMU with
* it
*/
static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
{
struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
if (!(m->flags & IVMD_FLAG_EXCL_RANGE))
return;
if (iommu) {
/*
* We only can configure exclusion ranges per IOMMU, not
* per device. But we can enable the exclusion range per
* device. This is done here
*/
set_dev_entry_bit(devid, DEV_ENTRY_EX);
iommu->exclusion_start = m->range_start;
iommu->exclusion_length = m->range_length;
}
}
/*
* Takes a pointer to an AMD IOMMU entry in the ACPI table and
* initializes the hardware and our data structures with it.
*/
static int __init init_iommu_from_acpi(struct amd_iommu *iommu,
struct ivhd_header *h)
{
u8 *p = (u8 *)h;
u8 *end = p, flags = 0;
u16 devid = 0, devid_start = 0, devid_to = 0;
u32 dev_i, ext_flags = 0;
bool alias = false;
struct ivhd_entry *e;
int ret;
ret = add_early_maps();
if (ret)
return ret;
/*
* First save the recommended feature enable bits from ACPI
*/
iommu->acpi_flags = h->flags;
/*
* Done. Now parse the device entries
*/
p += sizeof(struct ivhd_header);
end += h->length;
while (p < end) {
e = (struct ivhd_entry *)p;
switch (e->type) {
case IVHD_DEV_ALL:
DUMP_printk(" DEV_ALL\t\t\t first devid: %02x:%02x.%x"
" last device %02x:%02x.%x flags: %02x\n",
PCI_BUS_NUM(iommu->first_device),
PCI_SLOT(iommu->first_device),
PCI_FUNC(iommu->first_device),
PCI_BUS_NUM(iommu->last_device),
PCI_SLOT(iommu->last_device),
PCI_FUNC(iommu->last_device),
e->flags);
for (dev_i = iommu->first_device;
dev_i <= iommu->last_device; ++dev_i)
set_dev_entry_from_acpi(iommu, dev_i,
e->flags, 0);
break;
case IVHD_DEV_SELECT:
DUMP_printk(" DEV_SELECT\t\t\t devid: %02x:%02x.%x "
"flags: %02x\n",
PCI_BUS_NUM(e->devid),
PCI_SLOT(e->devid),
PCI_FUNC(e->devid),
e->flags);
devid = e->devid;
set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
break;
case IVHD_DEV_SELECT_RANGE_START:
DUMP_printk(" DEV_SELECT_RANGE_START\t "
"devid: %02x:%02x.%x flags: %02x\n",
PCI_BUS_NUM(e->devid),
PCI_SLOT(e->devid),
PCI_FUNC(e->devid),
e->flags);
devid_start = e->devid;
flags = e->flags;
ext_flags = 0;
alias = false;
break;
case IVHD_DEV_ALIAS:
DUMP_printk(" DEV_ALIAS\t\t\t devid: %02x:%02x.%x "
"flags: %02x devid_to: %02x:%02x.%x\n",
PCI_BUS_NUM(e->devid),
PCI_SLOT(e->devid),
PCI_FUNC(e->devid),
e->flags,
PCI_BUS_NUM(e->ext >> 8),
PCI_SLOT(e->ext >> 8),
PCI_FUNC(e->ext >> 8));
devid = e->devid;
devid_to = e->ext >> 8;
set_dev_entry_from_acpi(iommu, devid , e->flags, 0);
set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
amd_iommu_alias_table[devid] = devid_to;
break;
case IVHD_DEV_ALIAS_RANGE:
DUMP_printk(" DEV_ALIAS_RANGE\t\t "
"devid: %02x:%02x.%x flags: %02x "
"devid_to: %02x:%02x.%x\n",
PCI_BUS_NUM(e->devid),
PCI_SLOT(e->devid),
PCI_FUNC(e->devid),
e->flags,
PCI_BUS_NUM(e->ext >> 8),
PCI_SLOT(e->ext >> 8),
PCI_FUNC(e->ext >> 8));
devid_start = e->devid;
flags = e->flags;
devid_to = e->ext >> 8;
ext_flags = 0;
alias = true;
break;
case IVHD_DEV_EXT_SELECT:
DUMP_printk(" DEV_EXT_SELECT\t\t devid: %02x:%02x.%x "
"flags: %02x ext: %08x\n",
PCI_BUS_NUM(e->devid),
PCI_SLOT(e->devid),
PCI_FUNC(e->devid),
e->flags, e->ext);
devid = e->devid;
set_dev_entry_from_acpi(iommu, devid, e->flags,
e->ext);
break;
case IVHD_DEV_EXT_SELECT_RANGE:
DUMP_printk(" DEV_EXT_SELECT_RANGE\t devid: "
"%02x:%02x.%x flags: %02x ext: %08x\n",
PCI_BUS_NUM(e->devid),
PCI_SLOT(e->devid),
PCI_FUNC(e->devid),
e->flags, e->ext);
devid_start = e->devid;
flags = e->flags;
ext_flags = e->ext;
alias = false;
break;
case IVHD_DEV_RANGE_END:
DUMP_printk(" DEV_RANGE_END\t\t devid: %02x:%02x.%x\n",
PCI_BUS_NUM(e->devid),
PCI_SLOT(e->devid),
PCI_FUNC(e->devid));
devid = e->devid;
for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
if (alias) {
amd_iommu_alias_table[dev_i] = devid_to;
set_dev_entry_from_acpi(iommu,
devid_to, flags, ext_flags);
}
set_dev_entry_from_acpi(iommu, dev_i,
flags, ext_flags);
}
break;
case IVHD_DEV_SPECIAL: {
u8 handle, type;
const char *var;
u16 devid;
int ret;
handle = e->ext & 0xff;
devid = (e->ext >> 8) & 0xffff;
type = (e->ext >> 24) & 0xff;
if (type == IVHD_SPECIAL_IOAPIC)
var = "IOAPIC";
else if (type == IVHD_SPECIAL_HPET)
var = "HPET";
else
var = "UNKNOWN";
DUMP_printk(" DEV_SPECIAL(%s[%d])\t\tdevid: %02x:%02x.%x\n",
var, (int)handle,
PCI_BUS_NUM(devid),
PCI_SLOT(devid),
PCI_FUNC(devid));
ret = add_special_device(type, handle, &devid, false);
if (ret)
return ret;
/*
* add_special_device might update the devid in case a
* command-line override is present. So call
* set_dev_entry_from_acpi after add_special_device.
*/
set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
break;
}
default:
break;
}
p += ivhd_entry_length(p);
}
return 0;
}
/* Initializes the device->iommu mapping for the driver */
static int __init init_iommu_devices(struct amd_iommu *iommu)
{
u32 i;
for (i = iommu->first_device; i <= iommu->last_device; ++i)
set_iommu_for_device(iommu, i);
return 0;
}
static void __init free_iommu_one(struct amd_iommu *iommu)
{
free_command_buffer(iommu);
free_event_buffer(iommu);
free_ppr_log(iommu);
iommu_unmap_mmio_space(iommu);
}
static void __init free_iommu_all(void)
{
struct amd_iommu *iommu, *next;
for_each_iommu_safe(iommu, next) {
list_del(&iommu->list);
free_iommu_one(iommu);
kfree(iommu);
}
}
/*
* Family15h Model 10h-1fh erratum 746 (IOMMU Logging May Stall Translations)
* Workaround:
* BIOS should disable L2B micellaneous clock gating by setting
* L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b
*/
static void amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
{
u32 value;
if ((boot_cpu_data.x86 != 0x15) ||
(boot_cpu_data.x86_model < 0x10) ||
(boot_cpu_data.x86_model > 0x1f))
return;
pci_write_config_dword(iommu->dev, 0xf0, 0x90);
pci_read_config_dword(iommu->dev, 0xf4, &value);
if (value & BIT(2))
return;
/* Select NB indirect register 0x90 and enable writing */
pci_write_config_dword(iommu->dev, 0xf0, 0x90 | (1 << 8));
pci_write_config_dword(iommu->dev, 0xf4, value | 0x4);
pr_info("AMD-Vi: Applying erratum 746 workaround for IOMMU at %s\n",
dev_name(&iommu->dev->dev));
/* Clear the enable writing bit */
pci_write_config_dword(iommu->dev, 0xf0, 0x90);
}
/*
* This function clues the initialization function for one IOMMU
* together and also allocates the command buffer and programs the
* hardware. It does NOT enable the IOMMU. This is done afterwards.
*/
static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
{
int ret;
spin_lock_init(&iommu->lock);
/* Add IOMMU to internal data structures */
list_add_tail(&iommu->list, &amd_iommu_list);
iommu->index = amd_iommus_present++;
if (unlikely(iommu->index >= MAX_IOMMUS)) {
WARN(1, "AMD-Vi: System has more IOMMUs than supported by this driver\n");
return -ENOSYS;
}
/* Index is fine - add IOMMU to the array */
amd_iommus[iommu->index] = iommu;
/*
* Copy data from ACPI table entry to the iommu struct
*/
iommu->devid = h->devid;
iommu->cap_ptr = h->cap_ptr;
iommu->pci_seg = h->pci_seg;
iommu->mmio_phys = h->mmio_phys;
/* Check if IVHD EFR contains proper max banks/counters */
if ((h->efr != 0) &&
((h->efr & (0xF << 13)) != 0) &&
((h->efr & (0x3F << 17)) != 0)) {
iommu->mmio_phys_end = MMIO_REG_END_OFFSET;
} else {
iommu->mmio_phys_end = MMIO_CNTR_CONF_OFFSET;
}
iommu->mmio_base = iommu_map_mmio_space(iommu->mmio_phys,
iommu->mmio_phys_end);
if (!iommu->mmio_base)
return -ENOMEM;
iommu->cmd_buf = alloc_command_buffer(iommu);
if (!iommu->cmd_buf)
return -ENOMEM;
iommu->evt_buf = alloc_event_buffer(iommu);
if (!iommu->evt_buf)
return -ENOMEM;
iommu->int_enabled = false;
ret = init_iommu_from_acpi(iommu, h);
if (ret)
return ret;
ret = amd_iommu_create_irq_domain(iommu);
if (ret)
return ret;
/*
* Make sure IOMMU is not considered to translate itself. The IVRS
* table tells us so, but this is a lie!
*/
amd_iommu_rlookup_table[iommu->devid] = NULL;
init_iommu_devices(iommu);
return 0;
}
/*
* Iterates over all IOMMU entries in the ACPI table, allocates the
* IOMMU structure and initializes it with init_iommu_one()
*/
static int __init init_iommu_all(struct acpi_table_header *table)
{
u8 *p = (u8 *)table, *end = (u8 *)table;
struct ivhd_header *h;
struct amd_iommu *iommu;
int ret;
end += table->length;
p += IVRS_HEADER_LENGTH;
while (p < end) {
h = (struct ivhd_header *)p;
switch (*p) {
case ACPI_IVHD_TYPE:
DUMP_printk("device: %02x:%02x.%01x cap: %04x "
"seg: %d flags: %01x info %04x\n",
PCI_BUS_NUM(h->devid), PCI_SLOT(h->devid),
PCI_FUNC(h->devid), h->cap_ptr,
h->pci_seg, h->flags, h->info);
DUMP_printk(" mmio-addr: %016llx\n",
h->mmio_phys);
iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
if (iommu == NULL)
return -ENOMEM;
ret = init_iommu_one(iommu, h);
if (ret)
return ret;
break;
default:
break;
}
p += h->length;
}
WARN_ON(p != end);
return 0;
}
static void init_iommu_perf_ctr(struct amd_iommu *iommu)
{
u64 val = 0xabcd, val2 = 0;
if (!iommu_feature(iommu, FEATURE_PC))
return;
amd_iommu_pc_present = true;
/* Check if the performance counters can be written to */
if ((0 != amd_iommu_pc_get_set_reg_val(0, 0, 0, 0, &val, true)) ||
(0 != amd_iommu_pc_get_set_reg_val(0, 0, 0, 0, &val2, false)) ||
(val != val2)) {
pr_err("AMD-Vi: Unable to write to IOMMU perf counter.\n");
amd_iommu_pc_present = false;
return;
}
pr_info("AMD-Vi: IOMMU performance counters supported\n");
val = readl(iommu->mmio_base + MMIO_CNTR_CONF_OFFSET);
iommu->max_banks = (u8) ((val >> 12) & 0x3f);
iommu->max_counters = (u8) ((val >> 7) & 0xf);
}
static ssize_t amd_iommu_show_cap(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct amd_iommu *iommu = dev_get_drvdata(dev);
return sprintf(buf, "%x\n", iommu->cap);
}
static DEVICE_ATTR(cap, S_IRUGO, amd_iommu_show_cap, NULL);
static ssize_t amd_iommu_show_features(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct amd_iommu *iommu = dev_get_drvdata(dev);
return sprintf(buf, "%llx\n", iommu->features);
}
static DEVICE_ATTR(features, S_IRUGO, amd_iommu_show_features, NULL);
static struct attribute *amd_iommu_attrs[] = {
&dev_attr_cap.attr,
&dev_attr_features.attr,
NULL,
};
static struct attribute_group amd_iommu_group = {
.name = "amd-iommu",
.attrs = amd_iommu_attrs,
};
static const struct attribute_group *amd_iommu_groups[] = {
&amd_iommu_group,
NULL,
};
static int iommu_init_pci(struct amd_iommu *iommu)
{
int cap_ptr = iommu->cap_ptr;
u32 range, misc, low, high;
iommu->dev = pci_get_bus_and_slot(PCI_BUS_NUM(iommu->devid),
iommu->devid & 0xff);
if (!iommu->dev)
return -ENODEV;
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
&iommu->cap);
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
&range);
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET,
&misc);
iommu->first_device = PCI_DEVID(MMIO_GET_BUS(range),
MMIO_GET_FD(range));
iommu->last_device = PCI_DEVID(MMIO_GET_BUS(range),
MMIO_GET_LD(range));
if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
amd_iommu_iotlb_sup = false;
/* read extended feature bits */
low = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
iommu->features = ((u64)high << 32) | low;
if (iommu_feature(iommu, FEATURE_GT)) {
int glxval;
u32 max_pasid;
u64 pasmax;
pasmax = iommu->features & FEATURE_PASID_MASK;
pasmax >>= FEATURE_PASID_SHIFT;
max_pasid = (1 << (pasmax + 1)) - 1;
amd_iommu_max_pasid = min(amd_iommu_max_pasid, max_pasid);
BUG_ON(amd_iommu_max_pasid & ~PASID_MASK);
glxval = iommu->features & FEATURE_GLXVAL_MASK;
glxval >>= FEATURE_GLXVAL_SHIFT;
if (amd_iommu_max_glx_val == -1)
amd_iommu_max_glx_val = glxval;
else
amd_iommu_max_glx_val = min(amd_iommu_max_glx_val, glxval);
}
if (iommu_feature(iommu, FEATURE_GT) &&
iommu_feature(iommu, FEATURE_PPR)) {
iommu->is_iommu_v2 = true;
amd_iommu_v2_present = true;
}
if (iommu_feature(iommu, FEATURE_PPR)) {
iommu->ppr_log = alloc_ppr_log(iommu);
if (!iommu->ppr_log)
return -ENOMEM;
}
if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
amd_iommu_np_cache = true;
init_iommu_perf_ctr(iommu);
if (is_rd890_iommu(iommu->dev)) {
int i, j;
iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
PCI_DEVFN(0, 0));
/*
* Some rd890 systems may not be fully reconfigured by the
* BIOS, so it's necessary for us to store this information so
* it can be reprogrammed on resume
*/
pci_read_config_dword(iommu->dev, iommu->cap_ptr + 4,
&iommu->stored_addr_lo);
pci_read_config_dword(iommu->dev, iommu->cap_ptr + 8,
&iommu->stored_addr_hi);
/* Low bit locks writes to configuration space */
iommu->stored_addr_lo &= ~1;
for (i = 0; i < 6; i++)
for (j = 0; j < 0x12; j++)
iommu->stored_l1[i][j] = iommu_read_l1(iommu, i, j);
for (i = 0; i < 0x83; i++)
iommu->stored_l2[i] = iommu_read_l2(iommu, i);
}
amd_iommu_erratum_746_workaround(iommu);
iommu->iommu_dev = iommu_device_create(&iommu->dev->dev, iommu,
amd_iommu_groups, "ivhd%d",
iommu->index);
return pci_enable_device(iommu->dev);
}
static void print_iommu_info(void)
{
static const char * const feat_str[] = {
"PreF", "PPR", "X2APIC", "NX", "GT", "[5]",
"IA", "GA", "HE", "PC"
};
struct amd_iommu *iommu;
for_each_iommu(iommu) {
int i;
pr_info("AMD-Vi: Found IOMMU at %s cap 0x%hx\n",
dev_name(&iommu->dev->dev), iommu->cap_ptr);
if (iommu->cap & (1 << IOMMU_CAP_EFR)) {
pr_info("AMD-Vi: Extended features: ");
for (i = 0; i < ARRAY_SIZE(feat_str); ++i) {
if (iommu_feature(iommu, (1ULL << i)))
pr_cont(" %s", feat_str[i]);
}
pr_cont("\n");
}
}
if (irq_remapping_enabled)
pr_info("AMD-Vi: Interrupt remapping enabled\n");
}
static int __init amd_iommu_init_pci(void)
{
struct amd_iommu *iommu;
int ret = 0;
for_each_iommu(iommu) {
ret = iommu_init_pci(iommu);
if (ret)
break;
}
init_device_table_dma();
for_each_iommu(iommu)
iommu_flush_all_caches(iommu);
ret = amd_iommu_init_api();
if (!ret)
print_iommu_info();
return ret;
}
/****************************************************************************
*
* The following functions initialize the MSI interrupts for all IOMMUs
* in the system. It's a bit challenging because there could be multiple
* IOMMUs per PCI BDF but we can call pci_enable_msi(x) only once per
* pci_dev.
*
****************************************************************************/
static int iommu_setup_msi(struct amd_iommu *iommu)
{
int r;
r = pci_enable_msi(iommu->dev);
if (r)
return r;
r = request_threaded_irq(iommu->dev->irq,
amd_iommu_int_handler,
amd_iommu_int_thread,
0, "AMD-Vi",
iommu);
if (r) {
pci_disable_msi(iommu->dev);
return r;
}
iommu->int_enabled = true;
return 0;
}
static int iommu_init_msi(struct amd_iommu *iommu)
{
int ret;
if (iommu->int_enabled)
goto enable_faults;
if (iommu->dev->msi_cap)
ret = iommu_setup_msi(iommu);
else
ret = -ENODEV;
if (ret)
return ret;
enable_faults:
iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
if (iommu->ppr_log != NULL)
iommu_feature_enable(iommu, CONTROL_PPFINT_EN);
return 0;
}
/****************************************************************************
*
* The next functions belong to the third pass of parsing the ACPI
* table. In this last pass the memory mapping requirements are
* gathered (like exclusion and unity mapping ranges).
*
****************************************************************************/
static void __init free_unity_maps(void)
{
struct unity_map_entry *entry, *next;
list_for_each_entry_safe(entry, next, &amd_iommu_unity_map, list) {
list_del(&entry->list);
kfree(entry);
}
}
/* called when we find an exclusion range definition in ACPI */
static int __init init_exclusion_range(struct ivmd_header *m)
{
int i;
switch (m->type) {
case ACPI_IVMD_TYPE:
set_device_exclusion_range(m->devid, m);
break;
case ACPI_IVMD_TYPE_ALL:
for (i = 0; i <= amd_iommu_last_bdf; ++i)
set_device_exclusion_range(i, m);
break;
case ACPI_IVMD_TYPE_RANGE:
for (i = m->devid; i <= m->aux; ++i)
set_device_exclusion_range(i, m);
break;
default:
break;
}
return 0;
}
/* called for unity map ACPI definition */
static int __init init_unity_map_range(struct ivmd_header *m)
{
struct unity_map_entry *e = NULL;
char *s;
e = kzalloc(sizeof(*e), GFP_KERNEL);
if (e == NULL)
return -ENOMEM;
switch (m->type) {
default:
kfree(e);
return 0;
case ACPI_IVMD_TYPE:
s = "IVMD_TYPEi\t\t\t";
e->devid_start = e->devid_end = m->devid;
break;
case ACPI_IVMD_TYPE_ALL:
s = "IVMD_TYPE_ALL\t\t";
e->devid_start = 0;
e->devid_end = amd_iommu_last_bdf;
break;
case ACPI_IVMD_TYPE_RANGE:
s = "IVMD_TYPE_RANGE\t\t";
e->devid_start = m->devid;
e->devid_end = m->aux;
break;
}
e->address_start = PAGE_ALIGN(m->range_start);
e->address_end = e->address_start + PAGE_ALIGN(m->range_length);
e->prot = m->flags >> 1;
DUMP_printk("%s devid_start: %02x:%02x.%x devid_end: %02x:%02x.%x"
" range_start: %016llx range_end: %016llx flags: %x\n", s,
PCI_BUS_NUM(e->devid_start), PCI_SLOT(e->devid_start),
PCI_FUNC(e->devid_start), PCI_BUS_NUM(e->devid_end),
PCI_SLOT(e->devid_end), PCI_FUNC(e->devid_end),
e->address_start, e->address_end, m->flags);
list_add_tail(&e->list, &amd_iommu_unity_map);
return 0;
}
/* iterates over all memory definitions we find in the ACPI table */
static int __init init_memory_definitions(struct acpi_table_header *table)
{
u8 *p = (u8 *)table, *end = (u8 *)table;
struct ivmd_header *m;
end += table->length;
p += IVRS_HEADER_LENGTH;
while (p < end) {
m = (struct ivmd_header *)p;
if (m->flags & IVMD_FLAG_EXCL_RANGE)
init_exclusion_range(m);
else if (m->flags & IVMD_FLAG_UNITY_MAP)
init_unity_map_range(m);
p += m->length;
}
return 0;
}
/*
* Init the device table to not allow DMA access for devices and
* suppress all page faults
*/
static void init_device_table_dma(void)
{
u32 devid;
for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
set_dev_entry_bit(devid, DEV_ENTRY_VALID);
set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
}
}
static void __init uninit_device_table_dma(void)
{
u32 devid;
for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
amd_iommu_dev_table[devid].data[0] = 0ULL;
amd_iommu_dev_table[devid].data[1] = 0ULL;
}
}
static void init_device_table(void)
{
u32 devid;
if (!amd_iommu_irq_remap)
return;
for (devid = 0; devid <= amd_iommu_last_bdf; ++devid)
set_dev_entry_bit(devid, DEV_ENTRY_IRQ_TBL_EN);
}
static void iommu_init_flags(struct amd_iommu *iommu)
{
iommu->acpi_flags & IVHD_FLAG_HT_TUN_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
iommu->acpi_flags & IVHD_FLAG_PASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
iommu->acpi_flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
iommu->acpi_flags & IVHD_FLAG_ISOC_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
iommu_feature_disable(iommu, CONTROL_ISOC_EN);
/*
* make IOMMU memory accesses cache coherent
*/
iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
/* Set IOTLB invalidation timeout to 1s */
iommu_set_inv_tlb_timeout(iommu, CTRL_INV_TO_1S);
}
static void iommu_apply_resume_quirks(struct amd_iommu *iommu)
{
int i, j;
u32 ioc_feature_control;
struct pci_dev *pdev = iommu->root_pdev;
/* RD890 BIOSes may not have completely reconfigured the iommu */
if (!is_rd890_iommu(iommu->dev) || !pdev)
return;
/*
* First, we need to ensure that the iommu is enabled. This is
* controlled by a register in the northbridge
*/
/* Select Northbridge indirect register 0x75 and enable writing */
pci_write_config_dword(pdev, 0x60, 0x75 | (1 << 7));
pci_read_config_dword(pdev, 0x64, &ioc_feature_control);
/* Enable the iommu */
if (!(ioc_feature_control & 0x1))
pci_write_config_dword(pdev, 0x64, ioc_feature_control | 1);
/* Restore the iommu BAR */
pci_write_config_dword(iommu->dev, iommu->cap_ptr + 4,
iommu->stored_addr_lo);
pci_write_config_dword(iommu->dev, iommu->cap_ptr + 8,
iommu->stored_addr_hi);
/* Restore the l1 indirect regs for each of the 6 l1s */
for (i = 0; i < 6; i++)
for (j = 0; j < 0x12; j++)
iommu_write_l1(iommu, i, j, iommu->stored_l1[i][j]);
/* Restore the l2 indirect regs */
for (i = 0; i < 0x83; i++)
iommu_write_l2(iommu, i, iommu->stored_l2[i]);
/* Lock PCI setup registers */
pci_write_config_dword(iommu->dev, iommu->cap_ptr + 4,
iommu->stored_addr_lo | 1);
}
/*
* This function finally enables all IOMMUs found in the system after
* they have been initialized
*/
static void early_enable_iommus(void)
{
struct amd_iommu *iommu;
for_each_iommu(iommu) {
iommu_disable(iommu);
iommu_init_flags(iommu);
iommu_set_device_table(iommu);
iommu_enable_command_buffer(iommu);
iommu_enable_event_buffer(iommu);
iommu_set_exclusion_range(iommu);
iommu_enable(iommu);
iommu_flush_all_caches(iommu);
}
}
static void enable_iommus_v2(void)
{
struct amd_iommu *iommu;
for_each_iommu(iommu) {
iommu_enable_ppr_log(iommu);
iommu_enable_gt(iommu);
}
}
static void enable_iommus(void)
{
early_enable_iommus();
enable_iommus_v2();
}
static void disable_iommus(void)
{
struct amd_iommu *iommu;
for_each_iommu(iommu)
iommu_disable(iommu);
}
/*
* Suspend/Resume support
* disable suspend until real resume implemented
*/
static void amd_iommu_resume(void)
{
struct amd_iommu *iommu;
for_each_iommu(iommu)
iommu_apply_resume_quirks(iommu);
/* re-load the hardware */
enable_iommus();
amd_iommu_enable_interrupts();
}
static int amd_iommu_suspend(void)
{
/* disable IOMMUs to go out of the way for BIOS */
disable_iommus();
return 0;
}
static struct syscore_ops amd_iommu_syscore_ops = {
.suspend = amd_iommu_suspend,
.resume = amd_iommu_resume,
};
static void __init free_on_init_error(void)
{
free_pages((unsigned long)irq_lookup_table,
get_order(rlookup_table_size));
if (amd_iommu_irq_cache) {
kmem_cache_destroy(amd_iommu_irq_cache);
amd_iommu_irq_cache = NULL;
}
free_pages((unsigned long)amd_iommu_rlookup_table,
get_order(rlookup_table_size));
free_pages((unsigned long)amd_iommu_alias_table,
get_order(alias_table_size));
free_pages((unsigned long)amd_iommu_dev_table,
get_order(dev_table_size));
free_iommu_all();
#ifdef CONFIG_GART_IOMMU
/*
* We failed to initialize the AMD IOMMU - try fallback to GART
* if possible.
*/
gart_iommu_init();
#endif
}
/* SB IOAPIC is always on this device in AMD systems */
#define IOAPIC_SB_DEVID ((0x00 << 8) | PCI_DEVFN(0x14, 0))
static bool __init check_ioapic_information(void)
{
const char *fw_bug = FW_BUG;
bool ret, has_sb_ioapic;
int idx;
has_sb_ioapic = false;
ret = false;
/*
* If we have map overrides on the kernel command line the
* messages in this function might not describe firmware bugs
* anymore - so be careful
*/
if (cmdline_maps)
fw_bug = "";
for (idx = 0; idx < nr_ioapics; idx++) {
int devid, id = mpc_ioapic_id(idx);
devid = get_ioapic_devid(id);
if (devid < 0) {
pr_err("%sAMD-Vi: IOAPIC[%d] not in IVRS table\n",
fw_bug, id);
ret = false;
} else if (devid == IOAPIC_SB_DEVID) {
has_sb_ioapic = true;
ret = true;
}
}
if (!has_sb_ioapic) {
/*
* We expect the SB IOAPIC to be listed in the IVRS
* table. The system timer is connected to the SB IOAPIC
* and if we don't have it in the list the system will
* panic at boot time. This situation usually happens
* when the BIOS is buggy and provides us the wrong
* device id for the IOAPIC in the system.
*/
pr_err("%sAMD-Vi: No southbridge IOAPIC found\n", fw_bug);
}
if (!ret)
pr_err("AMD-Vi: Disabling interrupt remapping\n");
return ret;
}
static void __init free_dma_resources(void)
{
free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
get_order(MAX_DOMAIN_ID/8));
free_unity_maps();
}
/*
* This is the hardware init function for AMD IOMMU in the system.
* This function is called either from amd_iommu_init or from the interrupt
* remapping setup code.
*
* This function basically parses the ACPI table for AMD IOMMU (IVRS)
* three times:
*
* 1 pass) Find the highest PCI device id the driver has to handle.
* Upon this information the size of the data structures is
* determined that needs to be allocated.
*
* 2 pass) Initialize the data structures just allocated with the
* information in the ACPI table about available AMD IOMMUs
* in the system. It also maps the PCI devices in the
* system to specific IOMMUs
*
* 3 pass) After the basic data structures are allocated and
* initialized we update them with information about memory
* remapping requirements parsed out of the ACPI table in
* this last pass.
*
* After everything is set up the IOMMUs are enabled and the necessary
* hotplug and suspend notifiers are registered.
*/
static int __init early_amd_iommu_init(void)
{
struct acpi_table_header *ivrs_base;
acpi_size ivrs_size;
acpi_status status;
int i, ret = 0;
if (!amd_iommu_detected)
return -ENODEV;
status = acpi_get_table_with_size("IVRS", 0, &ivrs_base, &ivrs_size);
if (status == AE_NOT_FOUND)
return -ENODEV;
else if (ACPI_FAILURE(status)) {
const char *err = acpi_format_exception(status);
pr_err("AMD-Vi: IVRS table error: %s\n", err);
return -EINVAL;
}
/*
* First parse ACPI tables to find the largest Bus/Dev/Func
* we need to handle. Upon this information the shared data
* structures for the IOMMUs in the system will be allocated
*/
ret = find_last_devid_acpi(ivrs_base);
if (ret)
goto out;
dev_table_size = tbl_size(DEV_TABLE_ENTRY_SIZE);
alias_table_size = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
/* Device table - directly used by all IOMMUs */
ret = -ENOMEM;
amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(dev_table_size));
if (amd_iommu_dev_table == NULL)
goto out;
/*
* Alias table - map PCI Bus/Dev/Func to Bus/Dev/Func the
* IOMMU see for that device
*/
amd_iommu_alias_table = (void *)__get_free_pages(GFP_KERNEL,
get_order(alias_table_size));
if (amd_iommu_alias_table == NULL)
goto out;
/* IOMMU rlookup table - find the IOMMU for a specific device */
amd_iommu_rlookup_table = (void *)__get_free_pages(
GFP_KERNEL | __GFP_ZERO,
get_order(rlookup_table_size));
if (amd_iommu_rlookup_table == NULL)
goto out;
amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
GFP_KERNEL | __GFP_ZERO,
get_order(MAX_DOMAIN_ID/8));
if (amd_iommu_pd_alloc_bitmap == NULL)
goto out;
/*
* let all alias entries point to itself
*/
for (i = 0; i <= amd_iommu_last_bdf; ++i)
amd_iommu_alias_table[i] = i;
/*
* never allocate domain 0 because its used as the non-allocated and
* error value placeholder
*/
amd_iommu_pd_alloc_bitmap[0] = 1;
spin_lock_init(&amd_iommu_pd_lock);
/*
* now the data structures are allocated and basically initialized
* start the real acpi table scan
*/
ret = init_iommu_all(ivrs_base);
if (ret)
goto out;
if (amd_iommu_irq_remap)
amd_iommu_irq_remap = check_ioapic_information();
if (amd_iommu_irq_remap) {
/*
* Interrupt remapping enabled, create kmem_cache for the
* remapping tables.
*/
ret = -ENOMEM;
amd_iommu_irq_cache = kmem_cache_create("irq_remap_cache",
MAX_IRQS_PER_TABLE * sizeof(u32),
IRQ_TABLE_ALIGNMENT,
0, NULL);
if (!amd_iommu_irq_cache)
goto out;
irq_lookup_table = (void *)__get_free_pages(
GFP_KERNEL | __GFP_ZERO,
get_order(rlookup_table_size));
if (!irq_lookup_table)
goto out;
}
ret = init_memory_definitions(ivrs_base);
if (ret)
goto out;
/* init the device table */
init_device_table();
out:
/* Don't leak any ACPI memory */
early_acpi_os_unmap_memory((char __iomem *)ivrs_base, ivrs_size);
ivrs_base = NULL;
return ret;
}
static int amd_iommu_enable_interrupts(void)
{
struct amd_iommu *iommu;
int ret = 0;
for_each_iommu(iommu) {
ret = iommu_init_msi(iommu);
if (ret)
goto out;
}
out:
return ret;
}
static bool detect_ivrs(void)
{
struct acpi_table_header *ivrs_base;
acpi_size ivrs_size;
acpi_status status;
status = acpi_get_table_with_size("IVRS", 0, &ivrs_base, &ivrs_size);
if (status == AE_NOT_FOUND)
return false;
else if (ACPI_FAILURE(status)) {
const char *err = acpi_format_exception(status);
pr_err("AMD-Vi: IVRS table error: %s\n", err);
return false;
}
early_acpi_os_unmap_memory((char __iomem *)ivrs_base, ivrs_size);
/* Make sure ACS will be enabled during PCI probe */
pci_request_acs();
return true;
}
static int amd_iommu_init_dma(void)
{
if (iommu_pass_through)
return amd_iommu_init_passthrough();
else
return amd_iommu_init_dma_ops();
}
/****************************************************************************
*
* AMD IOMMU Initialization State Machine
*
****************************************************************************/
static int __init state_next(void)
{
int ret = 0;
switch (init_state) {
case IOMMU_START_STATE:
if (!detect_ivrs()) {
init_state = IOMMU_NOT_FOUND;
ret = -ENODEV;
} else {
init_state = IOMMU_IVRS_DETECTED;
}
break;
case IOMMU_IVRS_DETECTED:
ret = early_amd_iommu_init();
init_state = ret ? IOMMU_INIT_ERROR : IOMMU_ACPI_FINISHED;
break;
case IOMMU_ACPI_FINISHED:
early_enable_iommus();
register_syscore_ops(&amd_iommu_syscore_ops);
x86_platform.iommu_shutdown = disable_iommus;
init_state = IOMMU_ENABLED;
break;
case IOMMU_ENABLED:
ret = amd_iommu_init_pci();
init_state = ret ? IOMMU_INIT_ERROR : IOMMU_PCI_INIT;
enable_iommus_v2();
break;
case IOMMU_PCI_INIT:
ret = amd_iommu_enable_interrupts();
init_state = ret ? IOMMU_INIT_ERROR : IOMMU_INTERRUPTS_EN;
break;
case IOMMU_INTERRUPTS_EN:
ret = amd_iommu_init_dma();
init_state = ret ? IOMMU_INIT_ERROR : IOMMU_DMA_OPS;
break;
case IOMMU_DMA_OPS:
init_state = IOMMU_INITIALIZED;
break;
case IOMMU_INITIALIZED:
/* Nothing to do */
break;
case IOMMU_NOT_FOUND:
case IOMMU_INIT_ERROR:
/* Error states => do nothing */
ret = -EINVAL;
break;
default:
/* Unknown state */
BUG();
}
return ret;
}
static int __init iommu_go_to_state(enum iommu_init_state state)
{
int ret = 0;
while (init_state != state) {
ret = state_next();
if (init_state == IOMMU_NOT_FOUND ||
init_state == IOMMU_INIT_ERROR)
break;
}
return ret;
}
#ifdef CONFIG_IRQ_REMAP
int __init amd_iommu_prepare(void)
{
int ret;
amd_iommu_irq_remap = true;
ret = iommu_go_to_state(IOMMU_ACPI_FINISHED);
if (ret)
return ret;
return amd_iommu_irq_remap ? 0 : -ENODEV;
}
int __init amd_iommu_enable(void)
{
int ret;
ret = iommu_go_to_state(IOMMU_ENABLED);
if (ret)
return ret;
irq_remapping_enabled = 1;
return 0;
}
void amd_iommu_disable(void)
{
amd_iommu_suspend();
}
int amd_iommu_reenable(int mode)
{
amd_iommu_resume();
return 0;
}
int __init amd_iommu_enable_faulting(void)
{
/* We enable MSI later when PCI is initialized */
return 0;
}
#endif
/*
* This is the core init function for AMD IOMMU hardware in the system.
* This function is called from the generic x86 DMA layer initialization
* code.
*/
static int __init amd_iommu_init(void)
{
int ret;
ret = iommu_go_to_state(IOMMU_INITIALIZED);
if (ret) {
free_dma_resources();
if (!irq_remapping_enabled) {
disable_iommus();
free_on_init_error();
} else {
struct amd_iommu *iommu;
uninit_device_table_dma();
for_each_iommu(iommu)
iommu_flush_all_caches(iommu);
}
}
return ret;
}
/****************************************************************************
*
* Early detect code. This code runs at IOMMU detection time in the DMA
* layer. It just looks if there is an IVRS ACPI table to detect AMD
* IOMMUs
*
****************************************************************************/
int __init amd_iommu_detect(void)
{
int ret;
if (no_iommu || (iommu_detected && !gart_iommu_aperture))
return -ENODEV;
if (amd_iommu_disabled)
return -ENODEV;
ret = iommu_go_to_state(IOMMU_IVRS_DETECTED);
if (ret)
return ret;
amd_iommu_detected = true;
iommu_detected = 1;
x86_init.iommu.iommu_init = amd_iommu_init;
return 0;
}
/****************************************************************************
*
* Parsing functions for the AMD IOMMU specific kernel command line
* options.
*
****************************************************************************/
static int __init parse_amd_iommu_dump(char *str)
{
amd_iommu_dump = true;
return 1;
}
static int __init parse_amd_iommu_options(char *str)
{
for (; *str; ++str) {
if (strncmp(str, "fullflush", 9) == 0)
amd_iommu_unmap_flush = true;
if (strncmp(str, "off", 3) == 0)
amd_iommu_disabled = true;
if (strncmp(str, "force_isolation", 15) == 0)
amd_iommu_force_isolation = true;
}
return 1;
}
static int __init parse_ivrs_ioapic(char *str)
{
unsigned int bus, dev, fn;
int ret, id, i;
u16 devid;
ret = sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn);
if (ret != 4) {
pr_err("AMD-Vi: Invalid command line: ivrs_ioapic%s\n", str);
return 1;
}
if (early_ioapic_map_size == EARLY_MAP_SIZE) {
pr_err("AMD-Vi: Early IOAPIC map overflow - ignoring ivrs_ioapic%s\n",
str);
return 1;
}
devid = ((bus & 0xff) << 8) | ((dev & 0x1f) << 3) | (fn & 0x7);
cmdline_maps = true;
i = early_ioapic_map_size++;
early_ioapic_map[i].id = id;
early_ioapic_map[i].devid = devid;
early_ioapic_map[i].cmd_line = true;
return 1;
}
static int __init parse_ivrs_hpet(char *str)
{
unsigned int bus, dev, fn;
int ret, id, i;
u16 devid;
ret = sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn);
if (ret != 4) {
pr_err("AMD-Vi: Invalid command line: ivrs_hpet%s\n", str);
return 1;
}
if (early_hpet_map_size == EARLY_MAP_SIZE) {
pr_err("AMD-Vi: Early HPET map overflow - ignoring ivrs_hpet%s\n",
str);
return 1;
}
devid = ((bus & 0xff) << 8) | ((dev & 0x1f) << 3) | (fn & 0x7);
cmdline_maps = true;
i = early_hpet_map_size++;
early_hpet_map[i].id = id;
early_hpet_map[i].devid = devid;
early_hpet_map[i].cmd_line = true;
return 1;
}
__setup("amd_iommu_dump", parse_amd_iommu_dump);
__setup("amd_iommu=", parse_amd_iommu_options);
__setup("ivrs_ioapic", parse_ivrs_ioapic);
__setup("ivrs_hpet", parse_ivrs_hpet);
IOMMU_INIT_FINISH(amd_iommu_detect,
gart_iommu_hole_init,
NULL,
NULL);
bool amd_iommu_v2_supported(void)
{
return amd_iommu_v2_present;
}
EXPORT_SYMBOL(amd_iommu_v2_supported);
/****************************************************************************
*
* IOMMU EFR Performance Counter support functionality. This code allows
* access to the IOMMU PC functionality.
*
****************************************************************************/
u8 amd_iommu_pc_get_max_banks(u16 devid)
{
struct amd_iommu *iommu;
u8 ret = 0;
/* locate the iommu governing the devid */
iommu = amd_iommu_rlookup_table[devid];
if (iommu)
ret = iommu->max_banks;
return ret;
}
EXPORT_SYMBOL(amd_iommu_pc_get_max_banks);
bool amd_iommu_pc_supported(void)
{
return amd_iommu_pc_present;
}
EXPORT_SYMBOL(amd_iommu_pc_supported);
u8 amd_iommu_pc_get_max_counters(u16 devid)
{
struct amd_iommu *iommu;
u8 ret = 0;
/* locate the iommu governing the devid */
iommu = amd_iommu_rlookup_table[devid];
if (iommu)
ret = iommu->max_counters;
return ret;
}
EXPORT_SYMBOL(amd_iommu_pc_get_max_counters);
int amd_iommu_pc_get_set_reg_val(u16 devid, u8 bank, u8 cntr, u8 fxn,
u64 *value, bool is_write)
{
struct amd_iommu *iommu;
u32 offset;
u32 max_offset_lim;
/* Make sure the IOMMU PC resource is available */
if (!amd_iommu_pc_present)
return -ENODEV;
/* Locate the iommu associated with the device ID */
iommu = amd_iommu_rlookup_table[devid];
/* Check for valid iommu and pc register indexing */
if (WARN_ON((iommu == NULL) || (fxn > 0x28) || (fxn & 7)))
return -ENODEV;
offset = (u32)(((0x40|bank) << 12) | (cntr << 8) | fxn);
/* Limit the offset to the hw defined mmio region aperture */
max_offset_lim = (u32)(((0x40|iommu->max_banks) << 12) |
(iommu->max_counters << 8) | 0x28);
if ((offset < MMIO_CNTR_REG_OFFSET) ||
(offset > max_offset_lim))
return -EINVAL;
if (is_write) {
writel((u32)*value, iommu->mmio_base + offset);
writel((*value >> 32), iommu->mmio_base + offset + 4);
} else {
*value = readl(iommu->mmio_base + offset + 4);
*value <<= 32;
*value = readl(iommu->mmio_base + offset);
}
return 0;
}
EXPORT_SYMBOL(amd_iommu_pc_get_set_reg_val);