linux/drivers/pinctrl/Kconfig
Mateusz Krawczuk 608a26a7bc pinctrl: Add s5pv210 support to pinctrl-exynos
This patch implements pinctrl support and adds device tree bindings
for s5pv210.

Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28 15:56:06 +02:00

298 lines
6.1 KiB
Plaintext

#
# PINCTRL infrastructure and drivers
#
config PINCTRL
bool
if PINCTRL
menu "Pin controllers"
depends on PINCTRL
config PINMUX
bool "Support pin multiplexing controllers"
config PINCONF
bool "Support pin configuration controllers"
config GENERIC_PINCONF
bool
select PINCONF
config DEBUG_PINCTRL
bool "Debug PINCTRL calls"
depends on DEBUG_KERNEL
help
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
config PINCTRL_ABX500
bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
depends on AB8500_CORE
select GENERIC_PINCONF
help
Select this to enable the ABx500 family IC GPIO driver
config PINCTRL_AB8500
bool "AB8500 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
config PINCTRL_AB8540
bool "AB8540 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
config PINCTRL_AB9540
bool "AB9540 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
config PINCTRL_AB8505
bool "AB8505 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
depends on ARCH_AT91
select PINMUX
select PINCONF
help
Say Y here to enable the at91 pinctrl driver
config PINCTRL_BAYTRAIL
bool "Intel Baytrail GPIO pin control"
depends on GPIOLIB && ACPI && X86
select IRQ_DOMAIN
help
driver for memory mapped GPIO functionality on Intel Baytrail
platforms. Supports 3 banks with 102, 28 and 44 gpios.
Most pins are usually muxed to some other functionality by firmware,
so only a small amount is available for gpio use.
Requires ACPI device enumeration code to set up a platform device.
config PINCTRL_BCM2835
bool
select PINMUX
select PINCONF
config PINCTRL_IMX
bool
select PINMUX
select PINCONF
config PINCTRL_IMX35
bool "IMX35 pinctrl driver"
depends on OF
depends on SOC_IMX35
select PINCTRL_IMX
help
Say Y here to enable the imx35 pinctrl driver
config PINCTRL_IMX51
bool "IMX51 pinctrl driver"
depends on OF
depends on SOC_IMX51
select PINCTRL_IMX
help
Say Y here to enable the imx51 pinctrl driver
config PINCTRL_IMX53
bool "IMX53 pinctrl driver"
depends on OF
depends on SOC_IMX53
select PINCTRL_IMX
help
Say Y here to enable the imx53 pinctrl driver
config PINCTRL_IMX6Q
bool "IMX6Q/DL pinctrl driver"
depends on OF
depends on SOC_IMX6Q
select PINCTRL_IMX
help
Say Y here to enable the imx6q/dl pinctrl driver
config PINCTRL_IMX6SL
bool "IMX6SL pinctrl driver"
depends on OF
depends on SOC_IMX6SL
select PINCTRL_IMX
help
Say Y here to enable the imx6sl pinctrl driver
config PINCTRL_VF610
bool "Freescale Vybrid VF610 pinctrl driver"
depends on OF
depends on SOC_VF610
select PINCTRL_IMX
help
Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
config PINCTRL_LANTIQ
bool
depends on LANTIQ
select PINMUX
select PINCONF
config PINCTRL_FALCON
bool
depends on SOC_FALCON
depends on PINCTRL_LANTIQ
config PINCTRL_MXS
bool
select PINMUX
select PINCONF
config PINCTRL_IMX23
bool
select PINCTRL_MXS
config PINCTRL_IMX28
bool
select PINCTRL_MXS
config PINCTRL_NOMADIK
bool "Nomadik pin controller driver"
depends on ARCH_U8500 || ARCH_NOMADIK
select PINMUX
select PINCONF
config PINCTRL_STN8815
bool "STN8815 pin controller driver"
depends on PINCTRL_NOMADIK && ARCH_NOMADIK
config PINCTRL_DB8500
bool "DB8500 pin controller driver"
depends on PINCTRL_NOMADIK && ARCH_U8500
config PINCTRL_DB8540
bool "DB8540 pin controller driver"
depends on PINCTRL_NOMADIK && ARCH_U8500
config PINCTRL_ROCKCHIP
bool
select PINMUX
select GENERIC_PINCONF
select GENERIC_IRQ_CHIP
config PINCTRL_SINGLE
tristate "One-register-per-pin type device tree based pinctrl driver"
depends on OF
select PINMUX
select PINCONF
select GENERIC_PINCONF
help
This selects the device tree based generic pinctrl driver.
config PINCTRL_SIRF
bool "CSR SiRFprimaII/SiRFmarco pin controller driver"
depends on ARCH_SIRF
select PINMUX
config PINCTRL_SUNXI
bool
select PINMUX
select GENERIC_PINCONF
config PINCTRL_ST
bool
depends on OF
select PINMUX
select PINCONF
config PINCTRL_TEGRA
bool
select PINMUX
select PINCONF
config PINCTRL_TEGRA20
bool
select PINCTRL_TEGRA
config PINCTRL_TEGRA30
bool
select PINCTRL_TEGRA
config PINCTRL_TEGRA114
bool
select PINCTRL_TEGRA
config PINCTRL_TZ1090
bool "Toumaz Xenif TZ1090 pin control driver"
depends on SOC_TZ1090
select PINMUX
select GENERIC_PINCONF
config PINCTRL_TZ1090_PDC
bool "Toumaz Xenif TZ1090 PDC pin control driver"
depends on SOC_TZ1090
select PINMUX
select PINCONF
config PINCTRL_U300
bool "U300 pin controller driver"
depends on ARCH_U300
select PINMUX
select GENERIC_PINCONF
config PINCTRL_COH901
bool "ST-Ericsson U300 COH 901 335/571 GPIO"
depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
help
Say yes here to support GPIO interface on ST-Ericsson U300.
The names of the two IP block variants supported are
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
ports of 8 GPIO pins each.
config PINCTRL_SAMSUNG
bool
select PINMUX
select PINCONF
config PINCTRL_EXYNOS
bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210)
select PINCTRL_SAMSUNG
config PINCTRL_EXYNOS5440
bool "Samsung EXYNOS5440 SoC pinctrl driver"
depends on SOC_EXYNOS5440
select PINMUX
select PINCONF
config PINCTRL_PALMAS
bool "Pinctrl driver for the PALMAS Series MFD devices"
depends on OF && MFD_PALMAS
select PINMUX
select GENERIC_PINCONF
help
Palmas device supports the configuration of pins for different
functionality. This driver supports the pinmux, push-pull and
open drain configuration for the Palmas series devices like
TPS65913, TPS80036 etc.
config PINCTRL_S3C24XX
bool "Samsung S3C24XX SoC pinctrl driver"
depends on ARCH_S3C24XX
select PINCTRL_SAMSUNG
config PINCTRL_S3C64XX
bool "Samsung S3C64XX SoC pinctrl driver"
depends on ARCH_S3C64XX
select PINCTRL_SAMSUNG
source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
source "drivers/pinctrl/vt8500/Kconfig"
config PINCTRL_XWAY
bool
depends on SOC_TYPE_XWAY
depends on PINCTRL_LANTIQ
endmenu
endif