linux/drivers/net/phy/rockchip.c
David Wu baf6ee8140 net: phy: Add rockchip PHY driver support
Support integrated ethernet PHY currently.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:28:58 -07:00

234 lines
5.2 KiB
C

/**
* drivers/net/phy/rockchip.c
*
* Driver for ROCKCHIP Ethernet PHYs
*
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
*
* David Wu <david.wu@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/ethtool.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#define INTERNAL_EPHY_ID 0x1234d400
#define MII_INTERNAL_CTRL_STATUS 17
#define SMI_ADDR_TSTCNTL 20
#define SMI_ADDR_TSTREAD1 21
#define SMI_ADDR_TSTREAD2 22
#define SMI_ADDR_TSTWRITE 23
#define MII_SPECIAL_CONTROL_STATUS 31
#define MII_AUTO_MDIX_EN BIT(7)
#define MII_MDIX_EN BIT(6)
#define MII_SPEED_10 BIT(2)
#define MII_SPEED_100 BIT(3)
#define TSTCNTL_RD (BIT(15) | BIT(10))
#define TSTCNTL_WR (BIT(14) | BIT(10))
#define TSTMODE_ENABLE 0x400
#define TSTMODE_DISABLE 0x0
#define WR_ADDR_A7CFG 0x18
static int rockchip_init_tstmode(struct phy_device *phydev)
{
int ret;
/* Enable access to Analog and DSP register banks */
ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
if (ret)
return ret;
ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
if (ret)
return ret;
return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
}
static int rockchip_close_tstmode(struct phy_device *phydev)
{
/* Back to basic register bank */
return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
}
static int rockchip_integrated_phy_analog_init(struct phy_device *phydev)
{
int ret;
ret = rockchip_init_tstmode(phydev);
if (ret)
return ret;
/*
* Adjust tx amplitude to make sginal better,
* the default value is 0x8.
*/
ret = phy_write(phydev, SMI_ADDR_TSTWRITE, 0xB);
if (ret)
return ret;
ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTCNTL_WR | WR_ADDR_A7CFG);
if (ret)
return ret;
return rockchip_close_tstmode(phydev);
}
static int rockchip_integrated_phy_config_init(struct phy_device *phydev)
{
int val, ret;
/*
* The auto MIDX has linked problem on some board,
* workround to disable auto MDIX.
*/
val = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
if (val < 0)
return val;
val &= ~MII_AUTO_MDIX_EN;
ret = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
if (ret)
return ret;
return rockchip_integrated_phy_analog_init(phydev);
}
static void rockchip_link_change_notify(struct phy_device *phydev)
{
int speed = SPEED_10;
if (phydev->autoneg == AUTONEG_ENABLE) {
int reg = phy_read(phydev, MII_SPECIAL_CONTROL_STATUS);
if (reg < 0) {
phydev_err(phydev, "phy_read err: %d.\n", reg);
return;
}
if (reg & MII_SPEED_100)
speed = SPEED_100;
else if (reg & MII_SPEED_10)
speed = SPEED_10;
} else {
int bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0) {
phydev_err(phydev, "phy_read err: %d.\n", bmcr);
return;
}
if (bmcr & BMCR_SPEED100)
speed = SPEED_100;
else
speed = SPEED_10;
}
/*
* If mode switch happens from 10BT to 100BT, all DSP/AFE
* registers are set to default values. So any AFE/DSP
* registers have to be re-initialized in this case.
*/
if ((phydev->speed == SPEED_10) && (speed == SPEED_100)) {
int ret = rockchip_integrated_phy_analog_init(phydev);
if (ret)
phydev_err(phydev, "rockchip_integrated_phy_analog_init err: %d.\n",
ret);
}
}
static int rockchip_set_polarity(struct phy_device *phydev, int polarity)
{
int reg, err, val;
/* get the current settings */
reg = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
if (reg < 0)
return reg;
reg &= ~MII_AUTO_MDIX_EN;
val = reg;
switch (polarity) {
case ETH_TP_MDI:
val &= ~MII_MDIX_EN;
break;
case ETH_TP_MDI_X:
val |= MII_MDIX_EN;
break;
case ETH_TP_MDI_AUTO:
case ETH_TP_MDI_INVALID:
default:
return 0;
}
if (val != reg) {
/* Set the new polarity value in the register */
err = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
if (err)
return err;
}
return 0;
}
static int rockchip_config_aneg(struct phy_device *phydev)
{
int err;
err = rockchip_set_polarity(phydev, phydev->mdix);
if (err < 0)
return err;
return genphy_config_aneg(phydev);
}
static int rockchip_phy_resume(struct phy_device *phydev)
{
genphy_resume(phydev);
return rockchip_integrated_phy_config_init(phydev);
}
static struct phy_driver rockchip_phy_driver[] = {
{
.phy_id = INTERNAL_EPHY_ID,
.phy_id_mask = 0xfffffff0,
.name = "Rockchip integrated EPHY",
.features = PHY_BASIC_FEATURES,
.flags = 0,
.link_change_notify = rockchip_link_change_notify,
.soft_reset = genphy_soft_reset,
.config_init = rockchip_integrated_phy_config_init,
.config_aneg = rockchip_config_aneg,
.read_status = genphy_read_status,
.suspend = genphy_suspend,
.resume = rockchip_phy_resume,
},
};
module_phy_driver(rockchip_phy_driver);
static struct mdio_device_id __maybe_unused rockchip_phy_tbl[] = {
{ INTERNAL_EPHY_ID, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, rockchip_phy_tbl);
MODULE_AUTHOR("David Wu <david.wu@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip Ethernet PHY driver");
MODULE_LICENSE("GPL v2");