linux/arch/m68k/coldfire/m54xx.c
Arnd Bergmann 63aadb7766 m68k: coldfire: use clkdev_lookup on most coldfire
Coldfire is now the only target that implements the clk_get()/clk_put()
helpers itself rather than using the common implementation.

Most coldfire variants only have two distinct clocks and use the clk
code purely for lookup. Change those over to use clkdev_lookup instead
but leave the custom clk interface for those two clocks.

Also leave the four SoCs that have gated clocks.

Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00

101 lines
2.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/***************************************************************************/
/*
* m54xx.c -- platform support for ColdFire 54xx based boards
*
* Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
*/
/***************************************************************************/
#include <linux/clkdev.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/clk.h>
#include <linux/memblock.h>
#include <asm/pgalloc.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/m54xxsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfclk.h>
#include <asm/m54xxgpt.h>
#ifdef CONFIG_MMU
#include <asm/mmu_context.h>
#endif
/***************************************************************************/
DEFINE_CLK(pll, "pll.0", MCF_CLK);
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
static struct clk_lookup m54xx_clk_lookup[] = {
CLKDEV_INIT(NULL, "pll.0", &clk_pll),
CLKDEV_INIT(NULL, "sys.0", &clk_sys),
CLKDEV_INIT("mcfslt.0", NULL, &clk_sys),
CLKDEV_INIT("mcfslt.1", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.2", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.3", NULL, &clk_sys),
CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
};
/***************************************************************************/
static void __init m54xx_uarts_init(void)
{
/* enable io pins */
__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC0);
__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
MCFGPIO_PAR_PSC1);
__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
MCF_PAR_PSC_CTS_CTS, MCFGPIO_PAR_PSC2);
__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC3);
}
/***************************************************************************/
static void __init m54xx_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u32 r;
/* set the fec/i2c/irq pin assignment register for i2c */
r = readl(MCF_PAR_FECI2CIRQ);
r |= MCF_PAR_FECI2CIRQ_SDA | MCF_PAR_FECI2CIRQ_SCL;
writel(r, MCF_PAR_FECI2CIRQ);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void mcf54xx_reset(void)
{
/* disable interrupts and enable the watchdog */
asm("movew #0x2700, %sr\n");
__raw_writel(0, MCF_GPT_GMS0);
__raw_writel(MCF_GPT_GCIR_CNT(1), MCF_GPT_GCIR0);
__raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
MCF_GPT_GMS0);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_reset = mcf54xx_reset;
mach_sched_init = hw_timer_init;
m54xx_uarts_init();
m54xx_i2c_init();
clkdev_add_table(m54xx_clk_lookup, ARRAY_SIZE(m54xx_clk_lookup));
}
/***************************************************************************/