linux/arch/arm/boot/dts/kirkwood-laplug.dts
Olof Johansson 61e810d364 mvebu DT changes for v3.16
- kirkwood
     - rework nsa3x0 board to add nsa320
     - large cleanup to facilitate use in barebox
     - guruplug phy updates
     - audio updates for t5325
 
  - mvebu
     - use clocks vice clock-frequency for uart nodes
 
     - armada 375/380/385
        - add watchdog node
        - add coherency fabric
        - add smp support
        - add sdhci
        - add ahci
        - add thermal sensor
 
     - armada 370/XP
        - and pmsu
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTa6c8AAoJEP45WPkGe8ZnwB8P/0jFC/tWujz/ndmri/lx8+pi
 rRzyuHg2MCG81lAsJD2dvCh1IWqSg4YM3JWGjiqTNDVn526iVnp9FuJ8SmLiursL
 KG0P1CX+uFqXY181DZBi1OFy3bIz2T/brrA48r6tAVoO3IiZ9v5UnaNz/QokCM+Z
 Yrx1d8sSi5i5/1IqycPOS6TpZ9WcKXAgJFPv7FnvPtKnOxWir7lMW609zCdc54yg
 vx/UQiBIMqgsgNYnwHIe4CjRcjgrg6f4i1Y10XHFK++w3vo9B4lZM67FKfv/Lslq
 z7zWC74v5/lA+SBW5Wb9fWqRxdMEcg8AtA1gQ4qc5phMrVSUZwFRp701goCLhf8j
 t9Hmf5fcVoVLGDTpbcoCuXYCD512VwP5/rv3OtrJ8hGiCajt7JegiRd66TgM6YhQ
 awf2Ss3xEWsmDjSijKN4/zJfn9zzCFwRjdsjBrpXDmi8XH73Obt2Hug/koa1rr86
 wFynL2KWkAmetPXFutOkU17zeOPZ4fs/oloCxpRO2jC8gaWLImO0jiCyMFZYEI4K
 bhIQjhD/rGPPnc4QyQ6Zln9f055tSlH/k5jycp2sGvqmbefTGawvLozi11wu1TXa
 aUeT3dRzXiK4qFn54YkgHwRM6Kp/pZMRXeeW9N27at+/CE9TIE1ZfR4jrTiXf7XS
 70CTD4ElIKbA7fI5gXnS
 =qPr0
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dt

Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper:

mvebu DT changes for v3.16

 - kirkwood
    - rework nsa3x0 board to add nsa320
    - large cleanup to facilitate use in barebox
    - guruplug phy updates
    - audio updates for t5325

 - mvebu
    - use clocks vice clock-frequency for uart nodes

    - armada 375/380/385
       - add watchdog node
       - add coherency fabric
       - add smp support
       - add sdhci
       - add ahci
       - add thermal sensor

    - armada 370/XP
       - and pmsu

* tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits)
  ARM: Kirkwood: t5325: Use simple card to instantiate audio
  ARM: Kirkwood: DT: Add missing #sound-dai-cells property
  ARM: Kirkwood: Add node for audio codec
  ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
  ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
  ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
  ARM: dts: kirkwood: set default pinctrl for I2C0
  ARM: dts: kirkwood: set default pinctrl for NAND
  ARM: dts: kirkwood: set default pinctrl for SPI0
  ARM: dts: kirkwood: set default pinctrl for UART0/1
  ARM: dts: kirkwood: set default pinctrl for GBE1
  ARM: dts: kirkwood: consolidate common pinctrl settings
  ARM: dts: kirkwood: add pinctrl node to common SoC include
  ARM: dts: kirkwood: rename pin-controller nodes
  ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
  ARM: dts: kirkwood: add stdout-path property to all boards
  ARM: dts: kirkwood: add node labels
  ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC
  ARM: mvebu: Enable the thermal sensor in Armada 375 SoC
  ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-19 21:55:03 -07:00

172 lines
3.2 KiB
Plaintext

/*
* Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "kirkwood.dtsi"
#include "kirkwood-6192.dtsi"
/ {
model = "LaCie LaPlug";
compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>; /* 128 MB */
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
mbus {
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
serial@12000 {
status = "okay";
};
i2c@11000 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c04";
pagesize = <16>;
reg = <0x50>;
};
};
pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
};
};
gpio_keys {
compatible = "gpio-keys";
button@1{
label = "Power push button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
};
gpio-leds {
compatible = "gpio-leds";
red-fail {
label = "laplug_v2:red:power";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
blue-power {
label = "laplug_v2:blue:power";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power_back1: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power Back 1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
usb_power_back2: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "USB Power Back 2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
usb_power_front: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "USB Power Front";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
/* Total size : 512MB */
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>; /* 1MB */
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x1000000>; /* 16MB */
};
partition@1100000 {
label = "rootfs";
reg = <0x1100000 0x1EF00000>; /* 495MB */
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};