linux/arch/arm/mach-omap2/Makefile
Paul Walmsley 63c8523841 OMAP2/3/4: create omap_hwmod layer
OMAP SoCs can be considered a collection of hardware IP blocks
connected by various interconnects.  The bus topology and device
integration data is somewhat more complex than platform_device can
encode.  This patch creates code and structures to manage information
about OMAP on-chip devices ("hardware modules") and their integration
to the rest of the chip.  Hardware module data is intended to be
generated dynamically from the TI hardware database for the OMAP4
chips and beyond, easing Linux support for new chip variants.

This code currently:

- resets and configures all hardware modules upon startup, reducing bootloader
  dependencies;

- provides hooks for Linux driver model code to enable, idle, and shutdown
  hardware modules (forthcoming patch);

- waits for hardware modules to leave idle once their clocks
  are enabled and OCP_SYSCONFIG bits are set appropriately.

- provides a means to pass arbitrary IP block configuration data (e.g.,
  FIFO size) to the device driver (via the dev_attr void pointer)

In the future this code is intended to:

- estimate interconnect bandwidth and latency characteristics to
  ensure constraints are satisfied during DVFS

- provide *GRPSEL bit data to the powerdomain code

- handle pin/ball muxing for devices

- generate IO mapping information dynamically

- supply device firewall configuration data

- provide hardware module data to other on-chip coprocessor software

- allow the removal of the "disable unused clocks" code in the OMAP2/3
  clock code

This patch represents a collaborative effort involving many people from TI,
Nokia, and the Linux-OMAP community.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Eric Thomas <ethomas@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 20:14:03 +03:00

89 lines
2.6 KiB
Makefile

#
# Makefile for the linux kernel.
#
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o
prcm-common = prcm.o powerdomain.o
clock-common = clock.o clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2) += cm.o
obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
iommu-y += iommu2.o
iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o
obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
mmc-twl4030.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
obj-y += usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
obj-y += $(smc91x-m) $(smc91x-y)