linux/arch/arm/mach-davinci/board-dm644x-evm.c
Linus Torvalds cbda94e039 ARM: SoC: driver changes
These changes are mostly for ARM specific device drivers that either
 don't have an upstream maintainer, or that had the maintainer ask
 us to pick up the changes to avoid conflicts. A large chunk of this
 are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from
 that, reset controllers for STi as well as a large rework of the
 Marvell Orion/EBU watchdog driver are notable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/1+GCrR//JCVInAQJmfg/9GyqHatDjjUPUBjUQRIEtKgGdmQwdbDqF
 x+OrS/q5B5zYbpIWkbkt1IUYJfU+89Z5ev9jxI4rV824Nu9Y92mHPDnv+N/ptkIh
 q2OVP3bQDpWs3aEVV2B1HBNcWrNUuwco9BJu05eegEePii/cto0/wKwWIgUmrmjy
 xOLthsnp2YmeplGs7ctC6Dz8XbmELebpawejTGylARXei/SwmzB/YYDgJbYjRL2I
 WSCVa8Vo+MZaGC/yxdKVTtvsKVQenxGoMO3ojikJeRdvuVRJds48Cw+UBdzWYNeJ
 3Ssvbdx6Xltf9jy/7H0btOUgxPetZuUV+2XpbWfGu0Zr9FcGDv3q9hrxA+UYKnkY
 GIGU0otSsmpHnX5Ms3E2xnHiV/fihxA3qohqts5kYRBDr5uc+IpW6SbDymQliCGG
 OO4XmIVM3pmsqAqP3Zuseemt9CeSW2yC0XlfXkzjO74yY39c+WLBbtGI40Z5W6i0
 mM1C8RD3QSNijYCEC8eqz06BQfRImsPs+jllsnJTZaHfbOsib718uvandjfG26lN
 616YMcqq0Sp51HIQ4qW7f2dQr7vOyNqbukdkrwF5JgkY/nVki5kdciRg/yeipRy6
 Ey80a+OTq0GQljM0F2dcH/A1eHH9KsuI1L6NdSMJsl0h6guIBORPTwTw3qJ13OkR
 wpJyM+Gm+Fk=
 =u/FI
 -----END PGP SIGNATURE-----

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...
2014-04-05 15:37:40 -07:00

826 lines
20 KiB
C

/*
* TI DaVinci EVM board support
*
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/platform_data/at24.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/phy.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
#include <linux/v4l2-dv-timings.h>
#include <linux/export.h>
#include <media/tvp514x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
static struct mtd_partition davinci_evm_norflash_partitions[] = {
/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
{
.name = "bootloader",
.offset = 0,
.size = 5 * SZ_64K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next 1 sectors */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_64K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data davinci_evm_norflash_data = {
.width = 2,
.parts = davinci_evm_norflash_partitions,
.nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
};
/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
* limits addresses to 16M, so using addresses past 16M will wrap */
static struct resource davinci_evm_norflash_resource = {
.start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
.end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device davinci_evm_norflash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &davinci_evm_norflash_data,
},
.num_resources = 1,
.resource = &davinci_evm_norflash_resource,
};
/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
* It may used instead of the (default) NOR chip to boot, using TI's
* tools to install the secondary boot loader (UBL) and U-Boot.
*/
static struct mtd_partition davinci_evm_nandflash_partition[] = {
/* Bootloader layout depends on whose u-boot is installed, but we
* can hide all the details.
* - block 0 for u-boot environment ... in mainline u-boot
* - block 1 for UBL (plus up to four backup copies in blocks 2..5)
* - blocks 6...? for u-boot
* - blocks 16..23 for u-boot environment ... in TI's u-boot
*/
{
.name = "bootloader",
.offset = 0,
.size = SZ_256K + SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* Kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = 0,
},
/* File system (older GIT kernels started this on the 5MB mark) */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
/* A few blocks at end hold a flash BBT ... created by TI's CCS
* using flashwriter_nand.out, but ignored by TI's versions of
* Linux and u-boot. We boot faster by using them.
*/
};
static struct davinci_aemif_timing davinci_evm_nandflash_timing = {
.wsetup = 20,
.wstrobe = 40,
.whold = 20,
.rsetup = 10,
.rstrobe = 40,
.rhold = 10,
.ta = 40,
};
static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
};
static struct resource davinci_evm_nandflash_resource[] = {
{
.start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
.end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = DM644X_ASYNC_EMIF_CONTROL_BASE,
.end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device davinci_evm_nandflash_device = {
.name = "davinci_nand",
.id = 0,
.dev = {
.platform_data = &davinci_evm_nandflash_data,
},
.num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
.resource = davinci_evm_nandflash_resource,
};
static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
static struct platform_device davinci_fb_device = {
.name = "davincifb",
.id = -1,
.dev = {
.dma_mask = &davinci_fb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = 0,
};
static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
.clk_polarity = 0,
.hs_polarity = 1,
.vs_polarity = 1
};
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
/* Inputs available at the TVP5146 */
static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
{
.index = 0,
.name = "Composite",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = TVP514X_STD_ALL,
},
{
.index = 1,
.name = "S-Video",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = TVP514X_STD_ALL,
},
};
/*
* this is the route info for connecting each input to decoder
* ouput that goes to vpfe. There is a one to one correspondence
* with tvp5146_inputs
*/
static struct vpfe_route dm644xevm_tvp5146_routes[] = {
{
.input = INPUT_CVBS_VI2B,
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
},
{
.input = INPUT_SVIDEO_VI2C_VI1C,
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
},
};
static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
{
.name = "tvp5146",
.grp_id = 0,
.num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
.inputs = dm644xevm_tvp5146_inputs,
.routes = dm644xevm_tvp5146_routes,
.can_route = 1,
.ccdc_if_params = {
.if_type = VPFE_BT656,
.hdpol = VPFE_PINPOL_POSITIVE,
.vdpol = VPFE_PINPOL_POSITIVE,
},
.board_info = {
I2C_BOARD_INFO("tvp5146", 0x5d),
.platform_data = &dm644xevm_tvp5146_pdata,
},
},
};
static struct vpfe_config dm644xevm_capture_cfg = {
.num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
.i2c_adapter_id = 1,
.sub_devs = dm644xevm_vpfe_sub_devs,
.card_name = "DM6446 EVM",
.ccdc = "DM6446 CCDC",
};
static struct platform_device rtc_dev = {
.name = "rtc_davinci_evm",
.id = -1,
};
static struct snd_platform_data dm644x_evm_snd_data;
/*----------------------------------------------------------------------*/
/*
* I2C GPIO expanders
*/
#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
/* U2 -- LEDs */
static struct gpio_led evm_leds[] = {
{ .name = "DS8", .active_low = 1,
.default_trigger = "heartbeat", },
{ .name = "DS7", .active_low = 1, },
{ .name = "DS6", .active_low = 1, },
{ .name = "DS5", .active_low = 1, },
{ .name = "DS4", .active_low = 1, },
{ .name = "DS3", .active_low = 1, },
{ .name = "DS2", .active_low = 1,
.default_trigger = "mmc0", },
{ .name = "DS1", .active_low = 1,
.default_trigger = "ide-disk", },
};
static const struct gpio_led_platform_data evm_led_data = {
.num_leds = ARRAY_SIZE(evm_leds),
.leds = evm_leds,
};
static struct platform_device *evm_led_dev;
static int
evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
{
struct gpio_led *leds = evm_leds;
int status;
while (ngpio--) {
leds->gpio = gpio++;
leds++;
}
/* what an extremely annoying way to be forced to handle
* device unregistration ...
*/
evm_led_dev = platform_device_alloc("leds-gpio", 0);
platform_device_add_data(evm_led_dev,
&evm_led_data, sizeof evm_led_data);
evm_led_dev->dev.parent = &client->dev;
status = platform_device_add(evm_led_dev);
if (status < 0) {
platform_device_put(evm_led_dev);
evm_led_dev = NULL;
}
return status;
}
static int
evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
{
if (evm_led_dev) {
platform_device_unregister(evm_led_dev);
evm_led_dev = NULL;
}
return 0;
}
static struct pcf857x_platform_data pcf_data_u2 = {
.gpio_base = PCF_Uxx_BASE(0),
.setup = evm_led_setup,
.teardown = evm_led_teardown,
};
/* U18 - A/V clock generator and user switch */
static int sw_gpio;
static ssize_t
sw_show(struct device *d, struct device_attribute *a, char *buf)
{
char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
strcpy(buf, s);
return strlen(s);
}
static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
static int
evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
{
int status;
/* export dip switch option */
sw_gpio = gpio + 7;
status = gpio_request(sw_gpio, "user_sw");
if (status == 0)
status = gpio_direction_input(sw_gpio);
if (status == 0)
status = device_create_file(&client->dev, &dev_attr_user_sw);
else
gpio_free(sw_gpio);
if (status != 0)
sw_gpio = -EINVAL;
/* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
gpio_request(gpio + 3, "pll_fs2");
gpio_direction_output(gpio + 3, 0);
gpio_request(gpio + 2, "pll_fs1");
gpio_direction_output(gpio + 2, 0);
gpio_request(gpio + 1, "pll_sr");
gpio_direction_output(gpio + 1, 0);
return 0;
}
static int
evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
{
gpio_free(gpio + 1);
gpio_free(gpio + 2);
gpio_free(gpio + 3);
if (sw_gpio > 0) {
device_remove_file(&client->dev, &dev_attr_user_sw);
gpio_free(sw_gpio);
}
return 0;
}
static struct pcf857x_platform_data pcf_data_u18 = {
.gpio_base = PCF_Uxx_BASE(1),
.n_latch = (1 << 3) | (1 << 2) | (1 << 1),
.setup = evm_u18_setup,
.teardown = evm_u18_teardown,
};
/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
static int
evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
{
/* p0 = nDRV_VBUS (initial: don't supply it) */
gpio_request(gpio + 0, "nDRV_VBUS");
gpio_direction_output(gpio + 0, 1);
/* p1 = VDDIMX_EN */
gpio_request(gpio + 1, "VDDIMX_EN");
gpio_direction_output(gpio + 1, 1);
/* p2 = VLYNQ_EN */
gpio_request(gpio + 2, "VLYNQ_EN");
gpio_direction_output(gpio + 2, 1);
/* p3 = n3V3_CF_RESET (initial: stay in reset) */
gpio_request(gpio + 3, "nCF_RESET");
gpio_direction_output(gpio + 3, 0);
/* (p4 unused) */
/* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
gpio_request(gpio + 5, "WLAN_RESET");
gpio_direction_output(gpio + 5, 1);
/* p6 = nATA_SEL (initial: select) */
gpio_request(gpio + 6, "nATA_SEL");
gpio_direction_output(gpio + 6, 0);
/* p7 = nCF_SEL (initial: deselect) */
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
return 0;
}
static int
evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
{
gpio_free(gpio + 7);
gpio_free(gpio + 6);
gpio_free(gpio + 5);
gpio_free(gpio + 3);
gpio_free(gpio + 2);
gpio_free(gpio + 1);
gpio_free(gpio + 0);
return 0;
}
static struct pcf857x_platform_data pcf_data_u35 = {
.gpio_base = PCF_Uxx_BASE(2),
.setup = evm_u35_setup,
.teardown = evm_u35_teardown,
};
/*----------------------------------------------------------------------*/
/* Most of this EEPROM is unused, but U-Boot uses some data:
* - 0x7f00, 6 bytes Ethernet Address
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
.setup = davinci_get_mac_addr,
.context = (void *)0x7f00,
};
/*
* MSP430 supports RTC, card detection, input from IR remote, and
* a bit more. It triggers interrupts on GPIO(7) from pressing
* buttons on the IR remote, and for card detect switches.
*/
static struct i2c_client *dm6446evm_msp;
static int dm6446evm_msp_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
dm6446evm_msp = client;
return 0;
}
static int dm6446evm_msp_remove(struct i2c_client *client)
{
dm6446evm_msp = NULL;
return 0;
}
static const struct i2c_device_id dm6446evm_msp_ids[] = {
{ "dm6446evm_msp", 0, },
{ /* end of list */ },
};
static struct i2c_driver dm6446evm_msp_driver = {
.driver.name = "dm6446evm_msp",
.id_table = dm6446evm_msp_ids,
.probe = dm6446evm_msp_probe,
.remove = dm6446evm_msp_remove,
};
static int dm6444evm_msp430_get_pins(void)
{
static const char txbuf[2] = { 2, 4, };
char buf[4];
struct i2c_msg msg[2] = {
{
.flags = 0,
.len = 2,
.buf = (void __force *)txbuf,
},
{
.flags = I2C_M_RD,
.len = 4,
.buf = buf,
},
};
int status;
if (!dm6446evm_msp)
return -ENXIO;
msg[0].addr = dm6446evm_msp->addr;
msg[1].addr = dm6446evm_msp->addr;
/* Command 4 == get input state, returns port 2 and port3 data
* S Addr W [A] len=2 [A] cmd=4 [A]
* RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
*/
status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
if (status < 0)
return status;
dev_dbg(&dm6446evm_msp->dev,
"PINS: %02x %02x %02x %02x\n",
buf[0], buf[1], buf[2], buf[3]);
return (buf[3] << 8) | buf[2];
}
static int dm6444evm_mmc_get_cd(int module)
{
int status = dm6444evm_msp430_get_pins();
return (status < 0) ? status : !(status & BIT(1));
}
static int dm6444evm_mmc_get_ro(int module)
{
int status = dm6444evm_msp430_get_pins();
return (status < 0) ? status : status & BIT(6 + 8);
}
static struct davinci_mmc_config dm6446evm_mmc_config = {
.get_cd = dm6444evm_mmc_get_cd,
.get_ro = dm6444evm_mmc_get_ro,
.wires = 4,
};
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("dm6446evm_msp", 0x23),
},
{
I2C_BOARD_INFO("pcf8574", 0x38),
.platform_data = &pcf_data_u2,
},
{
I2C_BOARD_INFO("pcf8574", 0x39),
.platform_data = &pcf_data_u18,
},
{
I2C_BOARD_INFO("pcf8574", 0x3a),
.platform_data = &pcf_data_u35,
},
{
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &eeprom_info,
},
{
I2C_BOARD_INFO("tlv320aic33", 0x1b),
},
};
/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
* which requires 100 usec of idle bus after i2c writes sent to it.
*/
static struct davinci_i2c_platform_data i2c_pdata = {
.bus_freq = 20 /* kHz */,
.bus_delay = 100 /* usec */,
.sda_pin = 44,
.scl_pin = 43,
};
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
/* venc standard timings */
static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
{
.name = "ntsc",
.timings_type = VPBE_ENC_STD,
.std_id = V4L2_STD_NTSC,
.interlaced = 1,
.xres = 720,
.yres = 480,
.aspect = {11, 10},
.fps = {30000, 1001},
.left_margin = 0x79,
.upper_margin = 0x10,
},
{
.name = "pal",
.timings_type = VPBE_ENC_STD,
.std_id = V4L2_STD_PAL,
.interlaced = 1,
.xres = 720,
.yres = 576,
.aspect = {54, 59},
.fps = {25, 1},
.left_margin = 0x7e,
.upper_margin = 0x16,
},
};
/* venc dv preset timings */
static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
{
.name = "480p59_94",
.timings_type = VPBE_ENC_DV_TIMINGS,
.dv_timings = V4L2_DV_BT_CEA_720X480P59_94,
.interlaced = 0,
.xres = 720,
.yres = 480,
.aspect = {1, 1},
.fps = {5994, 100},
.left_margin = 0x80,
.upper_margin = 0x20,
},
{
.name = "576p50",
.timings_type = VPBE_ENC_DV_TIMINGS,
.dv_timings = V4L2_DV_BT_CEA_720X576P50,
.interlaced = 0,
.xres = 720,
.yres = 576,
.aspect = {1, 1},
.fps = {50, 1},
.left_margin = 0x7e,
.upper_margin = 0x30,
},
};
/*
* The outputs available from VPBE + encoders. Keep the order same
* as that of encoders. First those from venc followed by that from
* encoders. Index in the output refers to index on a particular encoder.
* Driver uses this index to pass it to encoder when it supports more
* than one output. Userspace applications use index of the array to
* set an output.
*/
static struct vpbe_output dm644xevm_vpbe_outputs[] = {
{
.output = {
.index = 0,
.name = "Composite",
.type = V4L2_OUTPUT_TYPE_ANALOG,
.std = VENC_STD_ALL,
.capabilities = V4L2_OUT_CAP_STD,
},
.subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
.default_mode = "ntsc",
.num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing),
.modes = dm644xevm_enc_std_timing,
},
{
.output = {
.index = 1,
.name = "Component",
.type = V4L2_OUTPUT_TYPE_ANALOG,
.capabilities = V4L2_OUT_CAP_DV_TIMINGS,
},
.subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
.default_mode = "480p59_94",
.num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing),
.modes = dm644xevm_enc_preset_timing,
},
};
static struct vpbe_config dm644xevm_display_cfg = {
.module_name = "dm644x-vpbe-display",
.i2c_adapter_id = 1,
.osd = {
.module_name = DM644X_VPBE_OSD_SUBDEV_NAME,
},
.venc = {
.module_name = DM644X_VPBE_VENC_SUBDEV_NAME,
},
.num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs),
.outputs = dm644xevm_vpbe_outputs,
};
static struct platform_device *davinci_evm_devices[] __initdata = {
&davinci_fb_device,
&rtc_dev,
};
static void __init
davinci_evm_map_io(void)
{
dm644x_init();
}
static int davinci_phy_fixup(struct phy_device *phydev)
{
unsigned int control;
/* CRITICAL: Fix for increasing PHY signal drive strength for
* TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
* signal strength was low causing TX to fail randomly. The
* fix is to Set bit 11 (Increased MII drive strength) of PHY
* register 26 (Digital Config register) on this phy. */
control = phy_read(phydev, 26);
phy_write(phydev, 26, (control | 0x800));
return 0;
}
#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP)
#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
static __init void davinci_evm_init(void)
{
int ret;
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
ret = dm644x_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
aemif_clk = clk_get(NULL, "aemif");
clk_prepare_enable(aemif_clk);
if (HAS_ATA) {
if (HAS_NAND || HAS_NOR)
pr_warning("WARNING: both IDE and Flash are "
"enabled, but they share AEMIF pins.\n"
"\tDisable IDE for NAND/NOR support.\n");
davinci_init_ide();
} else if (HAS_NAND || HAS_NOR) {
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
davinci_cfg_reg(DM644X_ATAEN_DISABLE);
/* only one device will be jumpered and detected */
if (HAS_NAND) {
platform_device_register(&davinci_evm_nandflash_device);
if (davinci_aemif_setup(&davinci_evm_nandflash_device))
pr_warn("%s: Cannot configure AEMIF.\n",
__func__);
evm_leds[7].default_trigger = "nand-disk";
if (HAS_NOR)
pr_warning("WARNING: both NAND and NOR flash "
"are enabled; disable one of them.\n");
} else if (HAS_NOR)
platform_device_register(&davinci_evm_norflash_device);
}
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
davinci_setup_mmc(0, &dm6446evm_mmc_config);
dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
davinci_serial_init(dm644x_serial_device);
dm644x_init_asp(&dm644x_evm_snd_data);
/* irlml6401 switches over 1A, in under 8 msec */
davinci_setup_usb(1000, 8);
if (IS_BUILTIN(CONFIG_PHYLIB)) {
soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
}
}
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
.atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_machine = davinci_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END