linux/drivers/pinctrl/pinctrl-exynos.h
Tomasz Figa 499147c9db pinctrl: samsung: Split pin bank description into two structures
This patch splits pin bank description into two structures, one
describing bank type (currently only bitfield widths), which can be
shared across multiple banks and second containing bank-specific
parameters including a pointer to a bank type struct.

It is a prerequisite for further patch removing the statically hardcoded
register offsets, making it impossible to support SoCs with different
set and order of pin control registers.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 09:41:09 +02:00

99 lines
2.8 KiB
C

/*
* Exynos specific definitions for Samsung pinctrl and gpiolib driver.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* This file contains the Exynos specific definitions for the Samsung
* pinctrl/gpiolib interface drivers.
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/* External GPIO and wakeup interrupt related definitions */
#define EXYNOS_GPIO_ECON_OFFSET 0x700
#define EXYNOS_GPIO_EMASK_OFFSET 0x900
#define EXYNOS_GPIO_EPEND_OFFSET 0xA00
#define EXYNOS_WKUP_ECON_OFFSET 0xE00
#define EXYNOS_WKUP_EMASK_OFFSET 0xF00
#define EXYNOS_WKUP_EPEND_OFFSET 0xF40
#define EXYNOS_SVC_OFFSET 0xB08
#define EXYNOS_EINT_FUNC 0xF
/* helpers to access interrupt service register */
#define EXYNOS_SVC_GROUP_SHIFT 3
#define EXYNOS_SVC_GROUP_MASK 0x1f
#define EXYNOS_SVC_NUM_MASK 7
#define EXYNOS_SVC_GROUP(x) ((x >> EXYNOS_SVC_GROUP_SHIFT) & \
EXYNOS_SVC_GROUP_MASK)
/* Exynos specific external interrupt trigger types */
#define EXYNOS_EINT_LEVEL_LOW 0
#define EXYNOS_EINT_LEVEL_HIGH 1
#define EXYNOS_EINT_EDGE_FALLING 2
#define EXYNOS_EINT_EDGE_RISING 3
#define EXYNOS_EINT_EDGE_BOTH 4
#define EXYNOS_EINT_CON_MASK 0xF
#define EXYNOS_EINT_CON_LEN 4
#define EXYNOS_EINT_MAX_PER_BANK 8
#define EXYNOS_EINT_NR_WKUP_EINT
#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \
{ \
.type = &bank_type_off, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_NONE, \
.name = id \
}
#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \
{ \
.type = &bank_type_off, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_GPIO, \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \
{ \
.type = &bank_type_alive, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_WKUP, \
.eint_offset = offs, \
.name = id \
}
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
* @irq: interrupt number within the domain.
* @bank: bank responsible for this interrupt
*/
struct exynos_weint_data {
unsigned int irq;
struct samsung_pin_bank *bank;
};
/**
* struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts
* generated by the external wakeup interrupt controller.
* @nr_banks: count of banks being part of the mux
* @banks: array of banks being part of the mux
*/
struct exynos_muxed_weint_data {
unsigned int nr_banks;
struct samsung_pin_bank *banks[];
};