linux/drivers/serial/cpm_uart/cpm_uart.h
Laurent Pinchart 80776554b6 cpm_uart: Add generic clock API support to set baudrates
This patch introduces baudrate setting support via the generic clock API.
When present the optional device tree clock property is used instead of
fsl-cpm-brg. Platforms can then define complex clock schemes, to output
the serial clock on an external pin for instance.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-28 08:47:32 -05:00

154 lines
3.8 KiB
C

/*
* linux/drivers/serial/cpm_uart.h
*
* Driver for CPM (SCC/SMC) serial ports
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
*
* 2006 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*
*/
#ifndef CPM_UART_H
#define CPM_UART_H
#include <linux/platform_device.h>
#include <linux/fs_uart_pd.h>
#if defined(CONFIG_CPM2)
#include "cpm_uart_cpm2.h"
#elif defined(CONFIG_8xx)
#include "cpm_uart_cpm1.h"
#endif
#define SERIAL_CPM_MAJOR 204
#define SERIAL_CPM_MINOR 46
#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC)
#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING)
#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */
#define FLAG_SMC 0x00000002
#define FLAG_CONSOLE 0x00000001
#define UART_SMC1 fsid_smc1_uart
#define UART_SMC2 fsid_smc2_uart
#define UART_SCC1 fsid_scc1_uart
#define UART_SCC2 fsid_scc2_uart
#define UART_SCC3 fsid_scc3_uart
#define UART_SCC4 fsid_scc4_uart
#define UART_NR fs_uart_nr
#define RX_NUM_FIFO 4
#define RX_BUF_SIZE 32
#define TX_NUM_FIFO 4
#define TX_BUF_SIZE 32
#define SCC_WAIT_CLOSING 100
#define GPIO_CTS 0
#define GPIO_RTS 1
#define GPIO_DCD 2
#define GPIO_DSR 3
#define GPIO_DTR 4
#define GPIO_RI 5
#define NUM_GPIOS (GPIO_RI+1)
struct uart_cpm_port {
struct uart_port port;
u16 rx_nrfifos;
u16 rx_fifosize;
u16 tx_nrfifos;
u16 tx_fifosize;
smc_t __iomem *smcp;
smc_uart_t __iomem *smcup;
scc_t __iomem *sccp;
scc_uart_t __iomem *sccup;
cbd_t __iomem *rx_bd_base;
cbd_t __iomem *rx_cur;
cbd_t __iomem *tx_bd_base;
cbd_t __iomem *tx_cur;
unsigned char *tx_buf;
unsigned char *rx_buf;
u32 flags;
void (*set_lineif)(struct uart_cpm_port *);
struct clk *clk;
u8 brg;
uint dp_addr;
void *mem_addr;
dma_addr_t dma_addr;
u32 mem_size;
/* helpers */
int baud;
int bits;
/* Keep track of 'odd' SMC2 wirings */
int is_portb;
/* wait on close if needed */
int wait_closing;
/* value to combine with opcode to form cpm command */
u32 command;
int gpios[NUM_GPIOS];
};
extern int cpm_uart_nr;
extern struct uart_cpm_port cpm_uart_ports[UART_NR];
/* these are located in their respective files */
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
struct device_node *np);
void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
int cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
void smc1_lineif(struct uart_cpm_port *pinfo);
void smc2_lineif(struct uart_cpm_port *pinfo);
void scc1_lineif(struct uart_cpm_port *pinfo);
void scc2_lineif(struct uart_cpm_port *pinfo);
void scc3_lineif(struct uart_cpm_port *pinfo);
void scc4_lineif(struct uart_cpm_port *pinfo);
/*
virtual to phys transtalion
*/
static inline unsigned long cpu2cpm_addr(void *addr,
struct uart_cpm_port *pinfo)
{
int offset;
u32 val = (u32)addr;
u32 mem = (u32)pinfo->mem_addr;
/* sane check */
if (likely(val >= mem && val < mem + pinfo->mem_size)) {
offset = val - mem;
return pinfo->dma_addr + offset;
}
/* something nasty happened */
BUG();
return 0;
}
static inline void *cpm2cpu_addr(unsigned long addr,
struct uart_cpm_port *pinfo)
{
int offset;
u32 val = addr;
u32 dma = (u32)pinfo->dma_addr;
/* sane check */
if (likely(val >= dma && val < dma + pinfo->mem_size)) {
offset = val - dma;
return pinfo->mem_addr + offset;
}
/* something nasty happened */
BUG();
return NULL;
}
#endif /* CPM_UART_H */