linux/include/asm-mips/pgtable-32.h
Linus Torvalds cee4cca740 Merge git://git.infradead.org/hdrcleanup-2.6
* git://git.infradead.org/hdrcleanup-2.6: (63 commits)
  [S390] __FD_foo definitions.
  Switch to __s32 types in joystick.h instead of C99 types for consistency.
  Add <sys/types.h> to headers included for userspace in <linux/input.h>
  Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h
  Remove struct fddi_statistics from user view in <linux/if_fddi.h>
  Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390
  Revert include/media changes: Mauro says those ioctls are only used in-kernel(!)
  Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h>
  Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too
  Remove private struct dx_hash_info from public view in <linux/ext3_fs.h>
  Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h>
  Use __uXX types in <linux/divert.h> for struct divert_blk et al.
  Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible.
  Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely
  Use __uXX types in user-visible structures in <linux/nbd.h>
  Don't use 'u32' in user-visible struct ip_conntrack_old_tuple.
  Use __uXX types for S390 DASD volume label definitions which are user-visible
  S390 BIODASDREADCMB ioctl should use __u64 not u64 type.
  Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h>
  Fix private integer types used in V4L2 ioctls.
  ...

Manually resolve conflict in include/linux/mtd/physmap.h
2006-06-20 15:10:08 -07:00

243 lines
7.6 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
* Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
*/
#ifndef _ASM_PGTABLE_32_H
#define _ASM_PGTABLE_32_H
#include <asm/addrspace.h>
#include <asm/page.h>
#include <linux/linkage.h>
#include <asm/cachectl.h>
#include <asm/fixmap.h>
#include <asm-generic/pgtable-nopmd.h>
/*
* - add_wired_entry() add a fixed TLB entry, and move wired register
*/
extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask);
/*
* - add_temporary_entry() add a temporary TLB entry. We use TLB entries
* starting at the top and working down. This is for populating the
* TLB before trap_init() puts the TLB miss handler in place. It
* should be used only for entries matching the actual page tables,
* to prevent inconsistencies.
*/
extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask);
/* Basically we have the same two-level (which is the logical three level
* Linux page table layout folded) page tables as the i386. Some day
* when we have proper page coloring support we can have a 1% quicker
* tlb refill handling mechanism, but for now it is a bit slower but
* works even with the cache aliasing problem the R4k and above have.
*/
/* PGDIR_SHIFT determines what a third-level page table entry can map */
#ifdef CONFIG_64BIT_PHYS_ADDR
#define PGDIR_SHIFT 21
#else
#define PGDIR_SHIFT 22
#endif
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* Entries per page directory level: we use two-level, so
* we don't really have any PUD/PMD directory physically.
*/
#ifdef CONFIG_64BIT_PHYS_ADDR
#define PGD_ORDER 1
#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 1
#define PTE_ORDER 0
#else
#define PGD_ORDER 0
#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 1
#define PTE_ORDER 0
#endif
#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
#define VMALLOC_START MAP_BASE
#ifdef CONFIG_HIGHMEM
# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
#else
# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
#endif
#ifdef CONFIG_64BIT_PHYS_ADDR
#define pte_ERROR(e) \
printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
#else
#define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
#endif
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
extern void load_pgd(unsigned long pg_dir);
extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
/*
* Empty pgd/pmd entries point to the invalid_pte_table.
*/
static inline int pmd_none(pmd_t pmd)
{
return pmd_val(pmd) == (unsigned long) invalid_pte_table;
}
#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK)
static inline int pmd_present(pmd_t pmd)
{
return pmd_val(pmd) != (unsigned long) invalid_pte_table;
}
static inline void pmd_clear(pmd_t *pmdp)
{
pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
}
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t
pfn_pte(unsigned long pfn, pgprot_t prot)
{
pte_t pte;
pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f);
pte.pte_low = pgprot_val(prot);
return pte;
}
#else
#define pte_page(x) pfn_to_page(pte_pfn(x))
#ifdef CONFIG_CPU_VR41XX
#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
#else
#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
#endif
#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) */
#define __pgd_offset(address) pgd_index(address)
#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
/* to find an entry in a page-table-directory */
#define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr))
/* Find an entry in the third-level page table.. */
#define __pte_offset(address) \
(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset(dir, address) \
((pte_t *) (pmd_page_kernel(*dir)) + __pte_offset(address))
#define pte_offset_kernel(dir, address) \
((pte_t *) pmd_page_kernel(*(dir)) + __pte_offset(address))
#define pte_offset_map(dir, address) \
((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
#define pte_offset_map_nested(dir, address) \
((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
#define pte_unmap(pte) ((void)(pte))
#define pte_unmap_nested(pte) ((void)(pte))
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
/* Swap entries must have VALID bit cleared. */
#define __swp_type(x) (((x).val >> 10) & 0x1f)
#define __swp_offset(x) ((x).val >> 15)
#define __swp_entry(type,offset) \
((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
/*
* Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
*/
#define PTE_FILE_MAX_BITS 28
#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \
(((_pte).pte >> 2 ) & 0x38) | \
(((_pte).pte >> 10) << 6 ))
#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \
(((off) & 0x38) << 2 ) | \
(((off) >> 6 ) << 10) | \
_PAGE_FILE })
#else
/* Swap entries must have VALID and GLOBAL bits cleared. */
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
#define __swp_type(x) (((x).val >> 2) & 0x1f)
#define __swp_offset(x) ((x).val >> 7)
#define __swp_entry(type,offset) \
((swp_entry_t) { ((type) << 2) | ((offset) << 7) })
#else
#define __swp_type(x) (((x).val >> 8) & 0x1f)
#define __swp_offset(x) ((x).val >> 13)
#define __swp_entry(type,offset) \
((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
/*
* Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
*/
#define PTE_FILE_MAX_BITS 30
#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2)
#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 })
#else
/*
* Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
*/
#define PTE_FILE_MAX_BITS 28
#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \
(((_pte).pte >> 2) & 0x8) | \
(((_pte).pte >> 8) << 4))
#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \
(((off) & 0x8) << 2) | \
(((off) >> 4) << 8) | \
_PAGE_FILE })
#endif
#endif
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
#else
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
#endif
#endif /* _ASM_PGTABLE_32_H */