linux/include/asm-sh/rts7751r2d.h
Magnus Damm 2eeec85638 sh: intc - convert board specific r2d code
This patch converts the board specific interrupt code for r2d to make
use of intc. While at it we improve the Kconfig to avoid confusion.

- Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS.
- R2D-1 and R2D-PLUS use the same irq constants.
- R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ.
- R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ.
- The number and order of IRQ values are disconnected from register bits.
- Interrupt sources now start from IRQ 100.
- The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++.

Tested on R2D-1 and R2D-PLUS boards.

Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together
with intc structured as __initdata.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00

74 lines
2.8 KiB
C

#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
#define __ASM_SH_RENESAS_RTS7751R2D_H
/*
* linux/include/asm-sh/renesas_rts7751r2d.h
*
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
*
* Renesas Technology Sales RTS7751R2D support
*/
/* Board specific addresses. */
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
#define PA_CFCTL 0xa4000004 /* CF Timing control */
#define PA_CFPOW 0xa4000006 /* CF Power control */
#define PA_DISPCTL 0xa4000008 /* Display Timing control */
#define PA_SDMPOW 0xa400000a /* SD Power control */
#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
#define PA_PCICD 0xa400000e /* PCI Extention detect control */
#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */
#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */
#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
#define PA_VERREG 0xa4000032 /* FPGA Version Register */
#define PA_INPORT 0xa4000034 /* KEY Input Port control */
#define PA_OUTPORT 0xa4000036 /* LED control */
#define PA_BVERREG 0xa4000038 /* Board Revision Register */
#define PA_AX88796L 0xaa000400 /* AX88796L Area */
#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define R2D_FPGA_IRQ_BASE 100
#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
/* arch/sh/boards/renesas/rts7751r2d/irq.c */
void init_rts7751r2d_IRQ(void);
int rts7751r2d_irq_demux(int);
#define __IO_PREFIX rts7751r2d
#include <asm/io_generic.h>
#endif /* __ASM_SH_RENESAS_RTS7751R2D */