linux/drivers/mtd/maps/sbc_gxx.c
Thomas Gleixner 1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00

225 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/* sbc_gxx.c -- MTD map driver for Arcom Control Systems SBC-MediaGX,
SBC-GXm and SBC-GX1 series boards.
Copyright (C) 2001 Arcom Control System Ltd
The SBC-MediaGX / SBC-GXx has up to 16 MiB of
Intel StrataFlash (28F320/28F640) in x8 mode.
This driver uses the CFI probe and Intel Extended Command Set drivers.
The flash is accessed as follows:
16 KiB memory window at 0xdc000-0xdffff
Two IO address locations for paging
0x258
bit 0-7: address bit 14-21
0x259
bit 0-1: address bit 22-23
bit 7: 0 - reset/powered down
1 - device enabled
The single flash device is divided into 3 partition which appear as
separate MTD devices.
25/04/2001 AJL (Arcom) Modified signon strings and partition sizes
(to support bzImages up to 638KiB-ish)
*/
// Includes
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
// Defines
// - Hardware specific
#define WINDOW_START 0xdc000
/* Number of bits in offset. */
#define WINDOW_SHIFT 14
#define WINDOW_LENGTH (1 << WINDOW_SHIFT)
/* The bits for the offset into the window. */
#define WINDOW_MASK (WINDOW_LENGTH-1)
#define PAGE_IO 0x258
#define PAGE_IO_SIZE 2
/* bit 7 of 0x259 must be 1 to enable device. */
#define DEVICE_ENABLE 0x8000
// - Flash / Partition sizing
#define MAX_SIZE_KiB 16384
#define BOOT_PARTITION_SIZE_KiB 768
#define DATA_PARTITION_SIZE_KiB 1280
#define APP_PARTITION_SIZE_KiB 6144
// Globals
static volatile int page_in_window = -1; // Current page in window.
static void __iomem *iomapadr;
static DEFINE_SPINLOCK(sbc_gxx_spin);
/* partition_info gives details on the logical partitions that the split the
* single flash device into. If the size if zero we use up to the end of the
* device. */
static const struct mtd_partition partition_info[] = {
{ .name = "SBC-GXx flash boot partition",
.offset = 0,
.size = BOOT_PARTITION_SIZE_KiB*1024 },
{ .name = "SBC-GXx flash data partition",
.offset = BOOT_PARTITION_SIZE_KiB*1024,
.size = (DATA_PARTITION_SIZE_KiB)*1024 },
{ .name = "SBC-GXx flash application partition",
.offset = (BOOT_PARTITION_SIZE_KiB+DATA_PARTITION_SIZE_KiB)*1024 }
};
#define NUM_PARTITIONS 3
static inline void sbc_gxx_page(struct map_info *map, unsigned long ofs)
{
unsigned long page = ofs >> WINDOW_SHIFT;
if( page!=page_in_window ) {
outw( page | DEVICE_ENABLE, PAGE_IO );
page_in_window = page;
}
}
static map_word sbc_gxx_read8(struct map_info *map, unsigned long ofs)
{
map_word ret;
spin_lock(&sbc_gxx_spin);
sbc_gxx_page(map, ofs);
ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
spin_unlock(&sbc_gxx_spin);
return ret;
}
static void sbc_gxx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
{
while(len) {
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
spin_lock(&sbc_gxx_spin);
sbc_gxx_page(map, from);
memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
spin_unlock(&sbc_gxx_spin);
to += thislen;
from += thislen;
len -= thislen;
}
}
static void sbc_gxx_write8(struct map_info *map, map_word d, unsigned long adr)
{
spin_lock(&sbc_gxx_spin);
sbc_gxx_page(map, adr);
writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
spin_unlock(&sbc_gxx_spin);
}
static void sbc_gxx_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
{
while(len) {
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
spin_lock(&sbc_gxx_spin);
sbc_gxx_page(map, to);
memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
spin_unlock(&sbc_gxx_spin);
to += thislen;
from += thislen;
len -= thislen;
}
}
static struct map_info sbc_gxx_map = {
.name = "SBC-GXx flash",
.phys = NO_XIP,
.size = MAX_SIZE_KiB*1024, /* this must be set to a maximum possible amount
of flash so the cfi probe routines find all
the chips */
.bankwidth = 1,
.read = sbc_gxx_read8,
.copy_from = sbc_gxx_copy_from,
.write = sbc_gxx_write8,
.copy_to = sbc_gxx_copy_to
};
/* MTD device for all of the flash. */
static struct mtd_info *all_mtd;
static void cleanup_sbc_gxx(void)
{
if( all_mtd ) {
mtd_device_unregister(all_mtd);
map_destroy( all_mtd );
}
iounmap(iomapadr);
release_region(PAGE_IO,PAGE_IO_SIZE);
}
static int __init init_sbc_gxx(void)
{
iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
if (!iomapadr) {
printk( KERN_ERR"%s: failed to ioremap memory region\n",
sbc_gxx_map.name );
return -EIO;
}
if (!request_region( PAGE_IO, PAGE_IO_SIZE, "SBC-GXx flash")) {
printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n",
sbc_gxx_map.name,
PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1 );
iounmap(iomapadr);
return -EAGAIN;
}
printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
sbc_gxx_map.name,
PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
/* Probe for chip. */
all_mtd = do_map_probe( "cfi_probe", &sbc_gxx_map );
if( !all_mtd ) {
cleanup_sbc_gxx();
return -ENXIO;
}
all_mtd->owner = THIS_MODULE;
/* Create MTD devices for each partition. */
mtd_device_register(all_mtd, partition_info, NUM_PARTITIONS);
return 0;
}
module_init(init_sbc_gxx);
module_exit(cleanup_sbc_gxx);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Arcom Control Systems Ltd.");
MODULE_DESCRIPTION("MTD map driver for SBC-GXm and SBC-GX1 series boards");