linux/drivers/usb/host/xhci-rcar.h
Nishad Kamdar 3e45ed3cc1 USB: host: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to USB host controller drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Link: https://lore.kernel.org/r/20200404092135.GA4522@nishad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16 14:32:46 +02:00

56 lines
1.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* drivers/usb/host/xhci-rcar.h
*
* Copyright (C) 2014 Renesas Electronics Corporation
*/
#ifndef _XHCI_RCAR_H
#define _XHCI_RCAR_H
#define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem"
#define XHCI_RCAR_FIRMWARE_NAME_V2 "r8a779x_usb3_v2.dlmem"
#define XHCI_RCAR_FIRMWARE_NAME_V3 "r8a779x_usb3_v3.dlmem"
#if IS_ENABLED(CONFIG_USB_XHCI_RCAR)
void xhci_rcar_start(struct usb_hcd *hcd);
int xhci_rcar_init_quirk(struct usb_hcd *hcd);
int xhci_rcar_resume_quirk(struct usb_hcd *hcd);
#else
static inline void xhci_rcar_start(struct usb_hcd *hcd)
{
}
static inline int xhci_rcar_init_quirk(struct usb_hcd *hcd)
{
return 0;
}
static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
{
return 0;
}
#endif
/*
* On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
* to 1. However, these SoCs don't support 64-bit address memory
* pointers. So, this driver clears the AC64 bit of xhci->hcc_params
* to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
* xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk.
*
* And, since the firmware/internal CPU control the USBSTS.STS_HALT
* and the process speed is down when the roothub port enters U3,
* long delay for the handshake of STS_HALT is neeed in xhci_suspend()
* by using the XHCI_SLOW_SUSPEND quirk.
*/
#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \
.firmware_name = firmware, \
.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH | \
XHCI_SLOW_SUSPEND, \
.init_quirk = xhci_rcar_init_quirk, \
.plat_start = xhci_rcar_start, \
.resume_quirk = xhci_rcar_resume_quirk,
#endif /* _XHCI_RCAR_H */