linux/net/openvswitch/vport.c
Thomas Graf fa2d8ff4e3 openvswitch: Return vport module ref before destruction
Return module reference before invoking the respective vport
->destroy() function. This is needed as ovs_vport_del() is not
invoked inside an RCU read side critical section so the kfree
can occur immediately before returning to ovs_vport_del().

Returning the module reference before ->destroy() is safe because
the module unregistration is blocked on ovs_lock which we hold
while destroying the datapath.

Fixes: 62b9c8d037 ("ovs: Turn vports with dependencies into separate modules")
Reported-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 15:59:50 -04:00

628 lines
16 KiB
C

/*
* Copyright (c) 2007-2014 Nicira, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA
*/
#include <linux/etherdevice.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/jhash.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/percpu.h>
#include <linux/rcupdate.h>
#include <linux/rtnetlink.h>
#include <linux/compat.h>
#include <net/net_namespace.h>
#include <linux/module.h>
#include "datapath.h"
#include "vport.h"
#include "vport-internal_dev.h"
static void ovs_vport_record_error(struct vport *,
enum vport_err_type err_type);
static LIST_HEAD(vport_ops_list);
/* Protected by RCU read lock for reading, ovs_mutex for writing. */
static struct hlist_head *dev_table;
#define VPORT_HASH_BUCKETS 1024
/**
* ovs_vport_init - initialize vport subsystem
*
* Called at module load time to initialize the vport subsystem.
*/
int ovs_vport_init(void)
{
dev_table = kzalloc(VPORT_HASH_BUCKETS * sizeof(struct hlist_head),
GFP_KERNEL);
if (!dev_table)
return -ENOMEM;
return 0;
}
/**
* ovs_vport_exit - shutdown vport subsystem
*
* Called at module exit time to shutdown the vport subsystem.
*/
void ovs_vport_exit(void)
{
kfree(dev_table);
}
static struct hlist_head *hash_bucket(const struct net *net, const char *name)
{
unsigned int hash = jhash(name, strlen(name), (unsigned long) net);
return &dev_table[hash & (VPORT_HASH_BUCKETS - 1)];
}
int ovs_vport_ops_register(struct vport_ops *ops)
{
int err = -EEXIST;
struct vport_ops *o;
ovs_lock();
list_for_each_entry(o, &vport_ops_list, list)
if (ops->type == o->type)
goto errout;
list_add_tail(&ops->list, &vport_ops_list);
err = 0;
errout:
ovs_unlock();
return err;
}
EXPORT_SYMBOL_GPL(ovs_vport_ops_register);
void ovs_vport_ops_unregister(struct vport_ops *ops)
{
ovs_lock();
list_del(&ops->list);
ovs_unlock();
}
EXPORT_SYMBOL_GPL(ovs_vport_ops_unregister);
/**
* ovs_vport_locate - find a port that has already been created
*
* @name: name of port to find
*
* Must be called with ovs or RCU read lock.
*/
struct vport *ovs_vport_locate(const struct net *net, const char *name)
{
struct hlist_head *bucket = hash_bucket(net, name);
struct vport *vport;
hlist_for_each_entry_rcu(vport, bucket, hash_node)
if (!strcmp(name, vport->ops->get_name(vport)) &&
net_eq(ovs_dp_get_net(vport->dp), net))
return vport;
return NULL;
}
/**
* ovs_vport_alloc - allocate and initialize new vport
*
* @priv_size: Size of private data area to allocate.
* @ops: vport device ops
*
* Allocate and initialize a new vport defined by @ops. The vport will contain
* a private data area of size @priv_size that can be accessed using
* vport_priv(). vports that are no longer needed should be released with
* vport_free().
*/
struct vport *ovs_vport_alloc(int priv_size, const struct vport_ops *ops,
const struct vport_parms *parms)
{
struct vport *vport;
size_t alloc_size;
alloc_size = sizeof(struct vport);
if (priv_size) {
alloc_size = ALIGN(alloc_size, VPORT_ALIGN);
alloc_size += priv_size;
}
vport = kzalloc(alloc_size, GFP_KERNEL);
if (!vport)
return ERR_PTR(-ENOMEM);
vport->dp = parms->dp;
vport->port_no = parms->port_no;
vport->ops = ops;
INIT_HLIST_NODE(&vport->dp_hash_node);
if (ovs_vport_set_upcall_portids(vport, parms->upcall_portids)) {
kfree(vport);
return ERR_PTR(-EINVAL);
}
vport->percpu_stats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!vport->percpu_stats) {
kfree(vport);
return ERR_PTR(-ENOMEM);
}
return vport;
}
EXPORT_SYMBOL_GPL(ovs_vport_alloc);
/**
* ovs_vport_free - uninitialize and free vport
*
* @vport: vport to free
*
* Frees a vport allocated with vport_alloc() when it is no longer needed.
*
* The caller must ensure that an RCU grace period has passed since the last
* time @vport was in a datapath.
*/
void ovs_vport_free(struct vport *vport)
{
/* vport is freed from RCU callback or error path, Therefore
* it is safe to use raw dereference.
*/
kfree(rcu_dereference_raw(vport->upcall_portids));
free_percpu(vport->percpu_stats);
kfree(vport);
}
EXPORT_SYMBOL_GPL(ovs_vport_free);
static struct vport_ops *ovs_vport_lookup(const struct vport_parms *parms)
{
struct vport_ops *ops;
list_for_each_entry(ops, &vport_ops_list, list)
if (ops->type == parms->type)
return ops;
return NULL;
}
/**
* ovs_vport_add - add vport device (for kernel callers)
*
* @parms: Information about new vport.
*
* Creates a new vport with the specified configuration (which is dependent on
* device type). ovs_mutex must be held.
*/
struct vport *ovs_vport_add(const struct vport_parms *parms)
{
struct vport_ops *ops;
struct vport *vport;
ops = ovs_vport_lookup(parms);
if (ops) {
struct hlist_head *bucket;
if (!try_module_get(ops->owner))
return ERR_PTR(-EAFNOSUPPORT);
vport = ops->create(parms);
if (IS_ERR(vport)) {
module_put(ops->owner);
return vport;
}
bucket = hash_bucket(ovs_dp_get_net(vport->dp),
vport->ops->get_name(vport));
hlist_add_head_rcu(&vport->hash_node, bucket);
return vport;
}
/* Unlock to attempt module load and return -EAGAIN if load
* was successful as we need to restart the port addition
* workflow.
*/
ovs_unlock();
request_module("vport-type-%d", parms->type);
ovs_lock();
if (!ovs_vport_lookup(parms))
return ERR_PTR(-EAFNOSUPPORT);
else
return ERR_PTR(-EAGAIN);
}
/**
* ovs_vport_set_options - modify existing vport device (for kernel callers)
*
* @vport: vport to modify.
* @options: New configuration.
*
* Modifies an existing device with the specified configuration (which is
* dependent on device type). ovs_mutex must be held.
*/
int ovs_vport_set_options(struct vport *vport, struct nlattr *options)
{
if (!vport->ops->set_options)
return -EOPNOTSUPP;
return vport->ops->set_options(vport, options);
}
/**
* ovs_vport_del - delete existing vport device
*
* @vport: vport to delete.
*
* Detaches @vport from its datapath and destroys it. It is possible to fail
* for reasons such as lack of memory. ovs_mutex must be held.
*/
void ovs_vport_del(struct vport *vport)
{
ASSERT_OVSL();
hlist_del_rcu(&vport->hash_node);
module_put(vport->ops->owner);
vport->ops->destroy(vport);
}
/**
* ovs_vport_get_stats - retrieve device stats
*
* @vport: vport from which to retrieve the stats
* @stats: location to store stats
*
* Retrieves transmit, receive, and error stats for the given device.
*
* Must be called with ovs_mutex or rcu_read_lock.
*/
void ovs_vport_get_stats(struct vport *vport, struct ovs_vport_stats *stats)
{
int i;
memset(stats, 0, sizeof(*stats));
/* We potentially have 2 sources of stats that need to be combined:
* those we have collected (split into err_stats and percpu_stats) from
* set_stats() and device error stats from netdev->get_stats() (for
* errors that happen downstream and therefore aren't reported through
* our vport_record_error() function).
* Stats from first source are reported by ovs (OVS_VPORT_ATTR_STATS).
* netdev-stats can be directly read over netlink-ioctl.
*/
stats->rx_errors = atomic_long_read(&vport->err_stats.rx_errors);
stats->tx_errors = atomic_long_read(&vport->err_stats.tx_errors);
stats->tx_dropped = atomic_long_read(&vport->err_stats.tx_dropped);
stats->rx_dropped = atomic_long_read(&vport->err_stats.rx_dropped);
for_each_possible_cpu(i) {
const struct pcpu_sw_netstats *percpu_stats;
struct pcpu_sw_netstats local_stats;
unsigned int start;
percpu_stats = per_cpu_ptr(vport->percpu_stats, i);
do {
start = u64_stats_fetch_begin_irq(&percpu_stats->syncp);
local_stats = *percpu_stats;
} while (u64_stats_fetch_retry_irq(&percpu_stats->syncp, start));
stats->rx_bytes += local_stats.rx_bytes;
stats->rx_packets += local_stats.rx_packets;
stats->tx_bytes += local_stats.tx_bytes;
stats->tx_packets += local_stats.tx_packets;
}
}
/**
* ovs_vport_get_options - retrieve device options
*
* @vport: vport from which to retrieve the options.
* @skb: sk_buff where options should be appended.
*
* Retrieves the configuration of the given device, appending an
* %OVS_VPORT_ATTR_OPTIONS attribute that in turn contains nested
* vport-specific attributes to @skb.
*
* Returns 0 if successful, -EMSGSIZE if @skb has insufficient room, or another
* negative error code if a real error occurred. If an error occurs, @skb is
* left unmodified.
*
* Must be called with ovs_mutex or rcu_read_lock.
*/
int ovs_vport_get_options(const struct vport *vport, struct sk_buff *skb)
{
struct nlattr *nla;
int err;
if (!vport->ops->get_options)
return 0;
nla = nla_nest_start(skb, OVS_VPORT_ATTR_OPTIONS);
if (!nla)
return -EMSGSIZE;
err = vport->ops->get_options(vport, skb);
if (err) {
nla_nest_cancel(skb, nla);
return err;
}
nla_nest_end(skb, nla);
return 0;
}
/**
* ovs_vport_set_upcall_portids - set upcall portids of @vport.
*
* @vport: vport to modify.
* @ids: new configuration, an array of port ids.
*
* Sets the vport's upcall_portids to @ids.
*
* Returns 0 if successful, -EINVAL if @ids is zero length or cannot be parsed
* as an array of U32.
*
* Must be called with ovs_mutex.
*/
int ovs_vport_set_upcall_portids(struct vport *vport, const struct nlattr *ids)
{
struct vport_portids *old, *vport_portids;
if (!nla_len(ids) || nla_len(ids) % sizeof(u32))
return -EINVAL;
old = ovsl_dereference(vport->upcall_portids);
vport_portids = kmalloc(sizeof(*vport_portids) + nla_len(ids),
GFP_KERNEL);
if (!vport_portids)
return -ENOMEM;
vport_portids->n_ids = nla_len(ids) / sizeof(u32);
vport_portids->rn_ids = reciprocal_value(vport_portids->n_ids);
nla_memcpy(vport_portids->ids, ids, nla_len(ids));
rcu_assign_pointer(vport->upcall_portids, vport_portids);
if (old)
kfree_rcu(old, rcu);
return 0;
}
/**
* ovs_vport_get_upcall_portids - get the upcall_portids of @vport.
*
* @vport: vport from which to retrieve the portids.
* @skb: sk_buff where portids should be appended.
*
* Retrieves the configuration of the given vport, appending the
* %OVS_VPORT_ATTR_UPCALL_PID attribute which is the array of upcall
* portids to @skb.
*
* Returns 0 if successful, -EMSGSIZE if @skb has insufficient room.
* If an error occurs, @skb is left unmodified. Must be called with
* ovs_mutex or rcu_read_lock.
*/
int ovs_vport_get_upcall_portids(const struct vport *vport,
struct sk_buff *skb)
{
struct vport_portids *ids;
ids = rcu_dereference_ovsl(vport->upcall_portids);
if (vport->dp->user_features & OVS_DP_F_VPORT_PIDS)
return nla_put(skb, OVS_VPORT_ATTR_UPCALL_PID,
ids->n_ids * sizeof(u32), (void *)ids->ids);
else
return nla_put_u32(skb, OVS_VPORT_ATTR_UPCALL_PID, ids->ids[0]);
}
/**
* ovs_vport_find_upcall_portid - find the upcall portid to send upcall.
*
* @vport: vport from which the missed packet is received.
* @skb: skb that the missed packet was received.
*
* Uses the skb_get_hash() to select the upcall portid to send the
* upcall.
*
* Returns the portid of the target socket. Must be called with rcu_read_lock.
*/
u32 ovs_vport_find_upcall_portid(const struct vport *vport, struct sk_buff *skb)
{
struct vport_portids *ids;
u32 ids_index;
u32 hash;
ids = rcu_dereference(vport->upcall_portids);
if (ids->n_ids == 1 && ids->ids[0] == 0)
return 0;
hash = skb_get_hash(skb);
ids_index = hash - ids->n_ids * reciprocal_divide(hash, ids->rn_ids);
return ids->ids[ids_index];
}
/**
* ovs_vport_receive - pass up received packet to the datapath for processing
*
* @vport: vport that received the packet
* @skb: skb that was received
* @tun_key: tunnel (if any) that carried packet
*
* Must be called with rcu_read_lock. The packet cannot be shared and
* skb->data should point to the Ethernet header.
*/
void ovs_vport_receive(struct vport *vport, struct sk_buff *skb,
const struct ovs_tunnel_info *tun_info)
{
struct pcpu_sw_netstats *stats;
struct sw_flow_key key;
int error;
stats = this_cpu_ptr(vport->percpu_stats);
u64_stats_update_begin(&stats->syncp);
stats->rx_packets++;
stats->rx_bytes += skb->len +
(skb_vlan_tag_present(skb) ? VLAN_HLEN : 0);
u64_stats_update_end(&stats->syncp);
OVS_CB(skb)->input_vport = vport;
OVS_CB(skb)->egress_tun_info = NULL;
/* Extract flow from 'skb' into 'key'. */
error = ovs_flow_key_extract(tun_info, skb, &key);
if (unlikely(error)) {
kfree_skb(skb);
return;
}
ovs_dp_process_packet(skb, &key);
}
EXPORT_SYMBOL_GPL(ovs_vport_receive);
/**
* ovs_vport_send - send a packet on a device
*
* @vport: vport on which to send the packet
* @skb: skb to send
*
* Sends the given packet and returns the length of data sent. Either ovs
* lock or rcu_read_lock must be held.
*/
int ovs_vport_send(struct vport *vport, struct sk_buff *skb)
{
int sent = vport->ops->send(vport, skb);
if (likely(sent > 0)) {
struct pcpu_sw_netstats *stats;
stats = this_cpu_ptr(vport->percpu_stats);
u64_stats_update_begin(&stats->syncp);
stats->tx_packets++;
stats->tx_bytes += sent;
u64_stats_update_end(&stats->syncp);
} else if (sent < 0) {
ovs_vport_record_error(vport, VPORT_E_TX_ERROR);
} else {
ovs_vport_record_error(vport, VPORT_E_TX_DROPPED);
}
return sent;
}
/**
* ovs_vport_record_error - indicate device error to generic stats layer
*
* @vport: vport that encountered the error
* @err_type: one of enum vport_err_type types to indicate the error type
*
* If using the vport generic stats layer indicate that an error of the given
* type has occurred.
*/
static void ovs_vport_record_error(struct vport *vport,
enum vport_err_type err_type)
{
switch (err_type) {
case VPORT_E_RX_DROPPED:
atomic_long_inc(&vport->err_stats.rx_dropped);
break;
case VPORT_E_RX_ERROR:
atomic_long_inc(&vport->err_stats.rx_errors);
break;
case VPORT_E_TX_DROPPED:
atomic_long_inc(&vport->err_stats.tx_dropped);
break;
case VPORT_E_TX_ERROR:
atomic_long_inc(&vport->err_stats.tx_errors);
break;
}
}
static void free_vport_rcu(struct rcu_head *rcu)
{
struct vport *vport = container_of(rcu, struct vport, rcu);
ovs_vport_free(vport);
}
void ovs_vport_deferred_free(struct vport *vport)
{
if (!vport)
return;
call_rcu(&vport->rcu, free_vport_rcu);
}
EXPORT_SYMBOL_GPL(ovs_vport_deferred_free);
int ovs_tunnel_get_egress_info(struct ovs_tunnel_info *egress_tun_info,
struct net *net,
const struct ovs_tunnel_info *tun_info,
u8 ipproto,
u32 skb_mark,
__be16 tp_src,
__be16 tp_dst)
{
const struct ovs_key_ipv4_tunnel *tun_key;
struct rtable *rt;
struct flowi4 fl;
if (unlikely(!tun_info))
return -EINVAL;
tun_key = &tun_info->tunnel;
/* Route lookup to get srouce IP address.
* The process may need to be changed if the corresponding process
* in vports ops changed.
*/
rt = ovs_tunnel_route_lookup(net, tun_key, skb_mark, &fl, ipproto);
if (IS_ERR(rt))
return PTR_ERR(rt);
ip_rt_put(rt);
/* Generate egress_tun_info based on tun_info,
* saddr, tp_src and tp_dst
*/
__ovs_flow_tun_info_init(egress_tun_info,
fl.saddr, tun_key->ipv4_dst,
tun_key->ipv4_tos,
tun_key->ipv4_ttl,
tp_src, tp_dst,
tun_key->tun_id,
tun_key->tun_flags,
tun_info->options,
tun_info->options_len);
return 0;
}
EXPORT_SYMBOL_GPL(ovs_tunnel_get_egress_info);
int ovs_vport_get_egress_tun_info(struct vport *vport, struct sk_buff *skb,
struct ovs_tunnel_info *info)
{
/* get_egress_tun_info() is only implemented on tunnel ports. */
if (unlikely(!vport->ops->get_egress_tun_info))
return -EINVAL;
return vport->ops->get_egress_tun_info(vport, skb, info);
}