linux/drivers/net/wireless/ath/regd.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

590 lines
15 KiB
C

/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include "regd.h"
#include "regd_common.h"
/*
* This is a set of common rules used by our world regulatory domains.
* We have 12 world regulatory domains. To save space we consolidate
* the regulatory domains in 5 structures by frequency and change
* the flags on our reg_notifier() on a case by case basis.
*/
/* Only these channels all allow active scan on all world regulatory domains */
#define ATH9K_2GHZ_CH01_11 REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
/* We enable active scan on these a case by case basis by regulatory domain */
#define ATH9K_2GHZ_CH12_13 REG_RULE(2467-10, 2472+10, 40, 0, 20,\
NL80211_RRF_PASSIVE_SCAN)
#define ATH9K_2GHZ_CH14 REG_RULE(2484-10, 2484+10, 40, 0, 20,\
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_OFDM)
/* We allow IBSS on these on a case by case basis by regulatory domain */
#define ATH9K_5GHZ_5150_5350 REG_RULE(5150-10, 5350+10, 40, 0, 30,\
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
#define ATH9K_5GHZ_5470_5850 REG_RULE(5470-10, 5850+10, 40, 0, 30,\
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
#define ATH9K_5GHZ_5725_5850 REG_RULE(5725-10, 5850+10, 40, 0, 30,\
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
#define ATH9K_2GHZ_ALL ATH9K_2GHZ_CH01_11, \
ATH9K_2GHZ_CH12_13, \
ATH9K_2GHZ_CH14
#define ATH9K_5GHZ_ALL ATH9K_5GHZ_5150_5350, \
ATH9K_5GHZ_5470_5850
/* This one skips what we call "mid band" */
#define ATH9K_5GHZ_NO_MIDBAND ATH9K_5GHZ_5150_5350, \
ATH9K_5GHZ_5725_5850
/* Can be used for:
* 0x60, 0x61, 0x62 */
static const struct ieee80211_regdomain ath_world_regdom_60_61_62 = {
.n_reg_rules = 5,
.alpha2 = "99",
.reg_rules = {
ATH9K_2GHZ_ALL,
ATH9K_5GHZ_ALL,
}
};
/* Can be used by 0x63 and 0x65 */
static const struct ieee80211_regdomain ath_world_regdom_63_65 = {
.n_reg_rules = 4,
.alpha2 = "99",
.reg_rules = {
ATH9K_2GHZ_CH01_11,
ATH9K_2GHZ_CH12_13,
ATH9K_5GHZ_NO_MIDBAND,
}
};
/* Can be used by 0x64 only */
static const struct ieee80211_regdomain ath_world_regdom_64 = {
.n_reg_rules = 3,
.alpha2 = "99",
.reg_rules = {
ATH9K_2GHZ_CH01_11,
ATH9K_5GHZ_NO_MIDBAND,
}
};
/* Can be used by 0x66 and 0x69 */
static const struct ieee80211_regdomain ath_world_regdom_66_69 = {
.n_reg_rules = 3,
.alpha2 = "99",
.reg_rules = {
ATH9K_2GHZ_CH01_11,
ATH9K_5GHZ_ALL,
}
};
/* Can be used by 0x67, 0x6A and 0x68 */
static const struct ieee80211_regdomain ath_world_regdom_67_68_6A = {
.n_reg_rules = 4,
.alpha2 = "99",
.reg_rules = {
ATH9K_2GHZ_CH01_11,
ATH9K_2GHZ_CH12_13,
ATH9K_5GHZ_ALL,
}
};
static inline bool is_wwr_sku(u16 regd)
{
return ((regd & COUNTRY_ERD_FLAG) != COUNTRY_ERD_FLAG) &&
(((regd & WORLD_SKU_MASK) == WORLD_SKU_PREFIX) ||
(regd == WORLD));
}
static u16 ath_regd_get_eepromRD(struct ath_regulatory *reg)
{
return reg->current_rd & ~WORLDWIDE_ROAMING_FLAG;
}
bool ath_is_world_regd(struct ath_regulatory *reg)
{
return is_wwr_sku(ath_regd_get_eepromRD(reg));
}
EXPORT_SYMBOL(ath_is_world_regd);
static const struct ieee80211_regdomain *ath_default_world_regdomain(void)
{
/* this is the most restrictive */
return &ath_world_regdom_64;
}
static const struct
ieee80211_regdomain *ath_world_regdomain(struct ath_regulatory *reg)
{
switch (reg->regpair->regDmnEnum) {
case 0x60:
case 0x61:
case 0x62:
return &ath_world_regdom_60_61_62;
case 0x63:
case 0x65:
return &ath_world_regdom_63_65;
case 0x64:
return &ath_world_regdom_64;
case 0x66:
case 0x69:
return &ath_world_regdom_66_69;
case 0x67:
case 0x68:
case 0x6A:
return &ath_world_regdom_67_68_6A;
default:
WARN_ON(1);
return ath_default_world_regdomain();
}
}
/* Frequency is one where radar detection is required */
static bool ath_is_radar_freq(u16 center_freq)
{
return (center_freq >= 5260 && center_freq <= 5700);
}
/*
* N.B: These exception rules do not apply radar freqs.
*
* - We enable adhoc (or beaconing) if allowed by 11d
* - We enable active scan if the channel is allowed by 11d
* - If no country IE has been processed and a we determine we have
* received a beacon on a channel we can enable active scan and
* adhoc (or beaconing).
*/
static void
ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator)
{
enum ieee80211_band band;
struct ieee80211_supported_band *sband;
const struct ieee80211_reg_rule *reg_rule;
struct ieee80211_channel *ch;
unsigned int i;
u32 bandwidth = 0;
int r;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (!wiphy->bands[band])
continue;
sband = wiphy->bands[band];
for (i = 0; i < sband->n_channels; i++) {
ch = &sband->channels[i];
if (ath_is_radar_freq(ch->center_freq) ||
(ch->flags & IEEE80211_CHAN_RADAR))
continue;
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
r = freq_reg_info(wiphy,
ch->center_freq,
bandwidth,
&reg_rule);
if (r)
continue;
/*
* If 11d had a rule for this channel ensure
* we enable adhoc/beaconing if it allows us to
* use it. Note that we would have disabled it
* by applying our static world regdomain by
* default during init, prior to calling our
* regulatory_hint().
*/
if (!(reg_rule->flags &
NL80211_RRF_NO_IBSS))
ch->flags &=
~IEEE80211_CHAN_NO_IBSS;
if (!(reg_rule->flags &
NL80211_RRF_PASSIVE_SCAN))
ch->flags &=
~IEEE80211_CHAN_PASSIVE_SCAN;
} else {
if (ch->beacon_found)
ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
IEEE80211_CHAN_PASSIVE_SCAN);
}
}
}
}
/* Allows active scan scan on Ch 12 and 13 */
static void
ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator)
{
struct ieee80211_supported_band *sband;
struct ieee80211_channel *ch;
const struct ieee80211_reg_rule *reg_rule;
u32 bandwidth = 0;
int r;
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
/*
* If no country IE has been received always enable active scan
* on these channels. This is only done for specific regulatory SKUs
*/
if (initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) {
ch = &sband->channels[11]; /* CH 12 */
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
ch = &sband->channels[12]; /* CH 13 */
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
return;
}
/*
* If a country IE has been recieved check its rule for this
* channel first before enabling active scan. The passive scan
* would have been enforced by the initial processing of our
* custom regulatory domain.
*/
ch = &sband->channels[11]; /* CH 12 */
r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
if (!r) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
}
ch = &sband->channels[12]; /* CH 13 */
r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
if (!r) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
}
}
/* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */
static void ath_reg_apply_radar_flags(struct wiphy *wiphy)
{
struct ieee80211_supported_band *sband;
struct ieee80211_channel *ch;
unsigned int i;
if (!wiphy->bands[IEEE80211_BAND_5GHZ])
return;
sband = wiphy->bands[IEEE80211_BAND_5GHZ];
for (i = 0; i < sband->n_channels; i++) {
ch = &sband->channels[i];
if (!ath_is_radar_freq(ch->center_freq))
continue;
/* We always enable radar detection/DFS on this
* frequency range. Additionally we also apply on
* this frequency range:
* - If STA mode does not yet have DFS supports disable
* active scanning
* - If adhoc mode does not support DFS yet then
* disable adhoc in the frequency.
* - If AP mode does not yet support radar detection/DFS
* do not allow AP mode
*/
if (!(ch->flags & IEEE80211_CHAN_DISABLED))
ch->flags |= IEEE80211_CHAN_RADAR |
IEEE80211_CHAN_NO_IBSS |
IEEE80211_CHAN_PASSIVE_SCAN;
}
}
static void ath_reg_apply_world_flags(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator,
struct ath_regulatory *reg)
{
switch (reg->regpair->regDmnEnum) {
case 0x60:
case 0x63:
case 0x66:
case 0x67:
ath_reg_apply_beaconing_flags(wiphy, initiator);
break;
case 0x68:
ath_reg_apply_beaconing_flags(wiphy, initiator);
ath_reg_apply_active_scan_flags(wiphy, initiator);
break;
}
return;
}
int ath_reg_notifier_apply(struct wiphy *wiphy,
struct regulatory_request *request,
struct ath_regulatory *reg)
{
/* We always apply this */
ath_reg_apply_radar_flags(wiphy);
switch (request->initiator) {
case NL80211_REGDOM_SET_BY_DRIVER:
case NL80211_REGDOM_SET_BY_CORE:
case NL80211_REGDOM_SET_BY_USER:
break;
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
if (ath_is_world_regd(reg))
ath_reg_apply_world_flags(wiphy, request->initiator,
reg);
break;
}
return 0;
}
EXPORT_SYMBOL(ath_reg_notifier_apply);
static bool ath_regd_is_eeprom_valid(struct ath_regulatory *reg)
{
u16 rd = ath_regd_get_eepromRD(reg);
int i;
if (rd & COUNTRY_ERD_FLAG) {
/* EEPROM value is a country code */
u16 cc = rd & ~COUNTRY_ERD_FLAG;
printk(KERN_DEBUG
"ath: EEPROM indicates we should expect "
"a country code\n");
for (i = 0; i < ARRAY_SIZE(allCountries); i++)
if (allCountries[i].countryCode == cc)
return true;
} else {
/* EEPROM value is a regpair value */
if (rd != CTRY_DEFAULT)
printk(KERN_DEBUG "ath: EEPROM indicates we "
"should expect a direct regpair map\n");
for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
if (regDomainPairs[i].regDmnEnum == rd)
return true;
}
printk(KERN_DEBUG
"ath: invalid regulatory domain/country code 0x%x\n", rd);
return false;
}
/* EEPROM country code to regpair mapping */
static struct country_code_to_enum_rd*
ath_regd_find_country(u16 countryCode)
{
int i;
for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
if (allCountries[i].countryCode == countryCode)
return &allCountries[i];
}
return NULL;
}
/* EEPROM rd code to regpair mapping */
static struct country_code_to_enum_rd*
ath_regd_find_country_by_rd(int regdmn)
{
int i;
for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
if (allCountries[i].regDmnEnum == regdmn)
return &allCountries[i];
}
return NULL;
}
/* Returns the map of the EEPROM set RD to a country code */
static u16 ath_regd_get_default_country(u16 rd)
{
if (rd & COUNTRY_ERD_FLAG) {
struct country_code_to_enum_rd *country = NULL;
u16 cc = rd & ~COUNTRY_ERD_FLAG;
country = ath_regd_find_country(cc);
if (country != NULL)
return cc;
}
return CTRY_DEFAULT;
}
static struct reg_dmn_pair_mapping*
ath_get_regpair(int regdmn)
{
int i;
if (regdmn == NO_ENUMRD)
return NULL;
for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++) {
if (regDomainPairs[i].regDmnEnum == regdmn)
return &regDomainPairs[i];
}
return NULL;
}
static int
ath_regd_init_wiphy(struct ath_regulatory *reg,
struct wiphy *wiphy,
int (*reg_notifier)(struct wiphy *wiphy,
struct regulatory_request *request))
{
const struct ieee80211_regdomain *regd;
wiphy->reg_notifier = reg_notifier;
wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
if (ath_is_world_regd(reg)) {
/*
* Anything applied here (prior to wiphy registration) gets
* saved on the wiphy orig_* parameters
*/
regd = ath_world_regdomain(reg);
wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
} else {
/*
* This gets applied in the case of the absense of CRDA,
* it's our own custom world regulatory domain, similar to
* cfg80211's but we enable passive scanning.
*/
regd = ath_default_world_regdomain();
}
wiphy_apply_custom_regulatory(wiphy, regd);
ath_reg_apply_radar_flags(wiphy);
ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
return 0;
}
/*
* Some users have reported their EEPROM programmed with
* 0x8000 set, this is not a supported regulatory domain
* but since we have more than one user with it we need
* a solution for them. We default to 0x64, which is the
* default Atheros world regulatory domain.
*/
static void ath_regd_sanitize(struct ath_regulatory *reg)
{
if (reg->current_rd != COUNTRY_ERD_FLAG)
return;
printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
reg->current_rd = 0x64;
}
int
ath_regd_init(struct ath_regulatory *reg,
struct wiphy *wiphy,
int (*reg_notifier)(struct wiphy *wiphy,
struct regulatory_request *request))
{
struct country_code_to_enum_rd *country = NULL;
u16 regdmn;
if (!reg)
return -EINVAL;
ath_regd_sanitize(reg);
printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
if (!ath_regd_is_eeprom_valid(reg)) {
printk(KERN_ERR "ath: Invalid EEPROM contents\n");
return -EINVAL;
}
regdmn = ath_regd_get_eepromRD(reg);
reg->country_code = ath_regd_get_default_country(regdmn);
if (reg->country_code == CTRY_DEFAULT &&
regdmn == CTRY_DEFAULT) {
printk(KERN_DEBUG "ath: EEPROM indicates default "
"country code should be used\n");
reg->country_code = CTRY_UNITED_STATES;
}
if (reg->country_code == CTRY_DEFAULT) {
country = NULL;
} else {
printk(KERN_DEBUG "ath: doing EEPROM country->regdmn "
"map search\n");
country = ath_regd_find_country(reg->country_code);
if (country == NULL) {
printk(KERN_DEBUG
"ath: no valid country maps found for "
"country code: 0x%0x\n",
reg->country_code);
return -EINVAL;
} else {
regdmn = country->regDmnEnum;
printk(KERN_DEBUG "ath: country maps to "
"regdmn code: 0x%0x\n",
regdmn);
}
}
reg->regpair = ath_get_regpair(regdmn);
if (!reg->regpair) {
printk(KERN_DEBUG "ath: "
"No regulatory domain pair found, cannot continue\n");
return -EINVAL;
}
if (!country)
country = ath_regd_find_country_by_rd(regdmn);
if (country) {
reg->alpha2[0] = country->isoName[0];
reg->alpha2[1] = country->isoName[1];
} else {
reg->alpha2[0] = '0';
reg->alpha2[1] = '0';
}
printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n",
reg->alpha2[0], reg->alpha2[1]);
printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n",
reg->regpair->regDmnEnum);
ath_regd_init_wiphy(reg, wiphy, reg_notifier);
return 0;
}
EXPORT_SYMBOL(ath_regd_init);
u32 ath_regd_get_band_ctl(struct ath_regulatory *reg,
enum ieee80211_band band)
{
if (!reg->regpair ||
(reg->country_code == CTRY_DEFAULT &&
is_wwr_sku(ath_regd_get_eepromRD(reg)))) {
return SD_NO_CTL;
}
switch (band) {
case IEEE80211_BAND_2GHZ:
return reg->regpair->reg_2ghz_ctl;
case IEEE80211_BAND_5GHZ:
return reg->regpair->reg_5ghz_ctl;
default:
return NO_CTL;
}
}
EXPORT_SYMBOL(ath_regd_get_band_ctl);