linux/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
Denis Carikli 153f1d84ab ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
The following devices/functionalities were added:
 * Main and secondary UARTs.
 * i2c and the pcf8563 device.
 * Ethernet.
 * NAND.
 * The BP1 button.
 * The LED.
 * Watchdog
 * SD.

Cc: Eric Bénard <eric@eukrea.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09 21:33:46 +08:00

82 lines
2.1 KiB
Plaintext

/*
* Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "imx35.dtsi"
/ {
model = "Eukrea CPUIMX35";
compatible = "eukrea,cpuimx35", "fsl,imx35";
memory {
reg = <0x80000000 0x8000000>; /* 128M */
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&iomuxc {
imx35-eukrea {
pinctrl_fec: fecgrp {
fsl,pins = <
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000
MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
MX35_PAD_FEC_COL__FEC_COL 0x80000000
MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000
MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000
MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX35_PAD_FEC_MDC__FEC_MDC 0x80000000
MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000
MX35_PAD_FEC_CRS__FEC_CRS 0x80000000
MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000
MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000
MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000
MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000
MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000
MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000
MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
>;
};
};
};
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};