linux/sound/pci/mixart/mixart_hwdep.h
Florian Fainelli e916151201 ALSA: sound/mixart: avoid redefining {readl,write}_{le,be} accessors
If the platform already provides a definition for these accessors
do not redefine them. The warning was caught on MIPS.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-11 02:02:20 +01:00

156 lines
6.5 KiB
C

/*
* Driver for Digigram miXart soundcards
*
* definitions and makros for basic card access
*
* Copyright (c) 2003 by Digigram <alsa@digigram.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __SOUND_MIXART_HWDEP_H
#define __SOUND_MIXART_HWDEP_H
#include <sound/hwdep.h>
#ifndef readl_be
#define readl_be(x) be32_to_cpu(__raw_readl(x))
#endif
#ifndef writel_be
#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
#endif
#ifndef readl_le
#define readl_le(x) le32_to_cpu(__raw_readl(x))
#endif
#ifndef writel_le
#define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr)
#endif
#define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x))
#define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x))
/* Daughter board Type */
#define DAUGHTER_TYPE_MASK 0x0F
#define DAUGHTER_VER_MASK 0xF0
#define DAUGHTER_TYPEVER_MASK (DAUGHTER_TYPE_MASK|DAUGHTER_VER_MASK)
#define MIXART_DAUGHTER_TYPE_NONE 0x00
#define MIXART_DAUGHTER_TYPE_COBRANET 0x08
#define MIXART_DAUGHTER_TYPE_AES 0x0E
#define MIXART_BA0_SIZE (16 * 1024 * 1024) /* 16M */
#define MIXART_BA1_SIZE (4 * 1024) /* 4k */
/*
* -----------BAR 0 --------------------------------------------------------------------------------------------------------
*/
#define MIXART_PSEUDOREG 0x2000 /* base address for pseudoregister */
#define MIXART_PSEUDOREG_BOARDNUMBER MIXART_PSEUDOREG+0 /* board number */
/* perfmeter (available when elf loaded)*/
#define MIXART_PSEUDOREG_PERF_STREAM_LOAD_OFFSET MIXART_PSEUDOREG+0x70 /* streaming load */
#define MIXART_PSEUDOREG_PERF_SYSTEM_LOAD_OFFSET MIXART_PSEUDOREG+0x78 /* system load (reference)*/
#define MIXART_PSEUDOREG_PERF_MAILBX_LOAD_OFFSET MIXART_PSEUDOREG+0x7C /* mailbox load */
#define MIXART_PSEUDOREG_PERF_INTERR_LOAD_OFFSET MIXART_PSEUDOREG+0x74 /* interrupt handling load */
/* motherboard xilinx loader info */
#define MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x9C /* 0x00600000 */
#define MIXART_PSEUDOREG_MXLX_SIZE_OFFSET MIXART_PSEUDOREG+0xA0 /* xilinx size in bytes */
#define MIXART_PSEUDOREG_MXLX_STATUS_OFFSET MIXART_PSEUDOREG+0xA4 /* status = EMBEBBED_STAT_XXX */
/* elf loader info */
#define MIXART_PSEUDOREG_ELF_STATUS_OFFSET MIXART_PSEUDOREG+0xB0 /* status = EMBEBBED_STAT_XXX */
/*
* after the elf code is loaded, and the flowtable info was passed to it,
* the driver polls on this address, until it shows 1 (presence) or 2 (absence)
* once it is non-zero, the daughter board type may be read
*/
#define MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET MIXART_PSEUDOREG+0x990
/* Global info structure */
#define MIXART_PSEUDOREG_DBRD_TYPE_OFFSET MIXART_PSEUDOREG+0x994 /* Type and version of daughterboard */
/* daughterboard xilinx loader info */
#define MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x998 /* get the address here where to write the file */
#define MIXART_PSEUDOREG_DXLX_SIZE_OFFSET MIXART_PSEUDOREG+0x99C /* xilinx size in bytes */
#define MIXART_PSEUDOREG_DXLX_STATUS_OFFSET MIXART_PSEUDOREG+0x9A0 /* status = EMBEBBED_STAT_XXX */
/* */
#define MIXART_FLOWTABLE_PTR 0x3000 /* pointer to flow table */
/* mailbox addresses */
/* message DRV -> EMB */
#define MSG_INBOUND_POST_HEAD 0x010008 /* DRV posts MF + increment4 */
#define MSG_INBOUND_POST_TAIL 0x01000C /* EMB gets MF + increment4 */
/* message EMB -> DRV */
#define MSG_OUTBOUND_POST_TAIL 0x01001C /* DRV gets MF + increment4 */
#define MSG_OUTBOUND_POST_HEAD 0x010018 /* EMB posts MF + increment4 */
/* Get Free Frames */
#define MSG_INBOUND_FREE_TAIL 0x010004 /* DRV gets MFA + increment4 */
#define MSG_OUTBOUND_FREE_TAIL 0x010014 /* EMB gets MFA + increment4 */
/* Put Free Frames */
#define MSG_OUTBOUND_FREE_HEAD 0x010010 /* DRV puts MFA + increment4 */
#define MSG_INBOUND_FREE_HEAD 0x010000 /* EMB puts MFA + increment4 */
/* firmware addresses of the message fifos */
#define MSG_BOUND_STACK_SIZE 0x004000 /* size of each following stack */
/* posted messages */
#define MSG_OUTBOUND_POST_STACK 0x108000 /* stack of messages to the DRV */
#define MSG_INBOUND_POST_STACK 0x104000 /* stack of messages to the EMB */
/* available empty messages */
#define MSG_OUTBOUND_FREE_STACK 0x10C000 /* stack of free enveloped for EMB */
#define MSG_INBOUND_FREE_STACK 0x100000 /* stack of free enveloped for DRV */
/* defines for mailbox message frames */
#define MSG_FRAME_OFFSET 0x64
#define MSG_FRAME_SIZE 0x6400
#define MSG_FRAME_NUMBER 32
#define MSG_FROM_AGENT_ITMF_OFFSET (MSG_FRAME_OFFSET + (MSG_FRAME_SIZE * MSG_FRAME_NUMBER))
#define MSG_TO_AGENT_ITMF_OFFSET (MSG_FROM_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
#define MSG_HOST_RSC_PROTECTION (MSG_TO_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
#define MSG_AGENT_RSC_PROTECTION (MSG_HOST_RSC_PROTECTION + 4)
/*
* -----------BAR 1 --------------------------------------------------------------------------------------------------------
*/
/* interrupt addresses and constants */
#define MIXART_PCI_OMIMR_OFFSET 0x34 /* outbound message interrupt mask register */
#define MIXART_PCI_OMISR_OFFSET 0x30 /* outbound message interrupt status register */
#define MIXART_PCI_ODBR_OFFSET 0x60 /* outbound doorbell register */
#define MIXART_BA1_BRUTAL_RESET_OFFSET 0x68 /* write 1 in LSBit to reset board */
#define MIXART_HOST_ALL_INTERRUPT_MASKED 0x02B /* 0000 0010 1011 */
#define MIXART_ALLOW_OUTBOUND_DOORBELL 0x023 /* 0000 0010 0011 */
#define MIXART_OIDI 0x008 /* 0000 0000 1000 */
int snd_mixart_setup_firmware(struct mixart_mgr *mgr);
#endif /* __SOUND_MIXART_HWDEP_H */