linux/arch/arm/mach-omap2/board-zoom-display.c
Paul Walmsley e2ed89fc4e ARM: OMAP: add includes for missing prototypes
Several C files in arch/arm/mach-omap* and arch/arm/plat-omap declare
functions that are used by other files, but don't include the header
file where the prototype is declared.  This results in the following
warnings from sparse:

    arch/arm/mach-omap2/irq.c:114:5: warning: symbol 'omap_irq_pending' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:186:13: warning: symbol 'omap2_init_irq' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:191:13: warning: symbol 'omap3_init_irq' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:196:13: warning: symbol 'ti81xx_init_irq' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:233:39: warning: symbol 'omap2_intc_handle_irq' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:242:6: warning: symbol 'omap_intc_save_context' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:265:6: warning: symbol 'omap_intc_restore_context' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:291:6: warning: symbol 'omap3_intc_suspend' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:297:6: warning: symbol 'omap3_intc_prepare_idle' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:306:6: warning: symbol 'omap3_intc_resume_idle' was not declared. Should it be static?
    arch/arm/mach-omap2/irq.c:312:39: warning: symbol 'omap3_intc_handle_irq' was not declared. Should it be static?
    arch/arm/mach-omap2/omap-secure.c:59:12: warning: symbol 'omap_secure_ram_reserve_memblock' was not declared. Should it be static?
    arch/arm/mach-omap2/board-zoom-display.c:133:13: warning: symbol 'zoom_display_init' was not declared. Should it be static?
    arch/arm/plat-omap/common.c:73:13: warning: symbol 'omap_init_consistent_dma_size' was not declared. Should it be static?
    arch/arm/mach-omap1/irq.c:61:5: warning: symbol 'omap_irq_flags' was not declared. Should it be static?
    arch/arm/mach-omap1/irq.c:179:13: warning: symbol 'omap1_init_irq' was not declared. Should it be static?
    arch/arm/mach-omap1/reset.c:11:6: warning: symbol 'omap1_restart' was not declared. Should it be static?

Fix by including the appropriate header files.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Senthilvadivu Guruswamy <svadivu@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-04-13 06:34:26 -06:00

145 lines
3.6 KiB
C

/*
* Copyright (C) 2010 Texas Instruments Inc.
*
* Modified from mach-omap2/board-zoom-peripherals.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/spi/spi.h>
#include <plat/mcspi.h>
#include <video/omapdss.h>
#include <mach/board-zoom.h>
#define LCD_PANEL_RESET_GPIO_PROD 96
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
static struct gpio zoom_lcd_gpios[] __initdata = {
{ -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" },
{ LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
};
static void __init zoom_lcd_panel_init(void)
{
zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :
LCD_PANEL_RESET_GPIO_PILOT;
if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios)))
pr_err("%s: Failed to get LCD GPIOs.\n", __func__);
}
static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
{
return 0;
}
static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
{
}
/*
* PWMA/B register offsets (TWL4030_MODULE_PWMA)
*/
#define TWL_INTBR_PMBR1 0xD
#define TWL_INTBR_GPBR1 0xC
#define TWL_LED_PWMON 0x0
#define TWL_LED_PWMOFF 0x1
static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
{
#ifdef CONFIG_TWL4030_CORE
unsigned char c;
u8 mux_pwm, enb_pwm;
if (level > 100)
return -1;
twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1);
twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1);
if (level == 0) {
/* disable pwm1 output and clock */
enb_pwm = enb_pwm & 0xF5;
/* change pwm1 pin to gpio pin */
mux_pwm = mux_pwm & 0xCF;
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
enb_pwm, TWL_INTBR_GPBR1);
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
mux_pwm, TWL_INTBR_PMBR1);
return 0;
}
if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) {
/* change gpio pin to pwm1 pin */
mux_pwm = mux_pwm | 0x30;
/* enable pwm1 output and clock*/
enb_pwm = enb_pwm | 0x0A;
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
mux_pwm, TWL_INTBR_PMBR1);
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
enb_pwm, TWL_INTBR_GPBR1);
}
c = ((50 * (100 - level)) / 100) + 1;
twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF);
twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON);
#else
pr_warn("Backlight not enabled\n");
#endif
return 0;
}
static struct omap_dss_device zoom_lcd_device = {
.name = "lcd",
.driver_name = "NEC_8048_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = zoom_panel_enable_lcd,
.platform_disable = zoom_panel_disable_lcd,
.max_backlight_level = 100,
.set_backlight = zoom_set_bl_intensity,
};
static struct omap_dss_device *zoom_dss_devices[] = {
&zoom_lcd_device,
};
static struct omap_dss_board_info zoom_dss_data = {
.num_devices = ARRAY_SIZE(zoom_dss_devices),
.devices = zoom_dss_devices,
.default_device = &zoom_lcd_device,
};
static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
.turbo_mode = 1,
};
static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
[0] = {
.modalias = "nec_8048_spi",
.bus_num = 1,
.chip_select = 2,
.max_speed_hz = 375000,
.controller_data = &dss_lcd_mcspi_config,
},
};
void __init zoom_display_init(void)
{
omap_display_init(&zoom_dss_data);
spi_register_board_info(nec_8048_spi_board_info,
ARRAY_SIZE(nec_8048_spi_board_info));
zoom_lcd_panel_init();
}