linux/drivers/tty/serial/Makefile
Linus Torvalds 9abf8acea2 TTY/Serial driver patches for 4.17-rc1
Here is the big set of tty and serial driver patches for 4.17-rc1
 
 Not all that big really, most are just small fixes and additions to
 existing drivers.  There's a bunch of work on the imx serial driver
 recently for some reason, and a new embedded serial driver added as
 well.
 
 Full details are in the shortlog.
 
 All of these have been in the linux-next tree for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSn+w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynb6wCdEf5dAUrSB37ptZY78n4kc6nI6NAAniDO+rjL
 ppZZp7QTIB/bnPfW8cOH
 =+tfY
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 4.17-rc1

  Not all that big really, most are just small fixes and additions to
  existing drivers. There's a bunch of work on the imx serial driver
  recently for some reason, and a new embedded serial driver added as
  well.

  Full details are in the shortlog.

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  serial: expose buf_overrun count through proc interface
  serial: mvebu-uart: fix tx lost characters
  tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe()
  tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP
  8250-men-mcb: add support for 16z025 and 16z057
  powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused
  serial: stm32: fix initialization of RS485 mode
  ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards
  vt: change SGR 21 to follow the standards
  serdev: Fix typo in serdev_device_alloc
  ARM: dts: STi: Fix aliases property name for STi boards
  tty: st-asc: Update tty alias
  serial: stm32: add support for RS485 hardware control mode
  dt-bindings: serial: stm32: add RS485 optional properties
  selftests: add devpts selftests
  devpts: comment devpts_mntget()
  devpts: resolve devpts bind-mounts
  devpts: hoist out check for DEVPTS_SUPER_MAGIC
  serial: 8250: Add Nuvoton NPCM UART
  serial: mxs-auart: disable clks of Alphascale ASM9260
  ...
2018-04-04 18:43:49 -07:00

98 lines
3.8 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the kernel serial device drivers.
#
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
# These Sparc drivers have to appear before others such as 8250
# which share ttySx minor node space. Otherwise console device
# names change and other unplesantries.
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
# Now bring in any enabled 8250/16450/16550 type drivers.
obj-$(CONFIG_SERIAL_8250) += 8250/
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
obj-$(CONFIG_SERIAL_ZS) += zs.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
obj-$(CONFIG_SERIAL_IMX) += imx.o
obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
obj-$(CONFIG_SERIAL_ICOM) += icom.o
obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
obj-$(CONFIG_SERIAL_RP2) += rp2.o
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o
obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o
obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o
obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o
obj-$(CONFIG_SERIAL_OWL) += owl-uart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o