linux/drivers/net/wireless/wl12xx/tx.c
Shahar Levi 00d201001b wl1271: Change wl12xx Files Names
All files name prefix removed due to the fact that wl12xx driver supports
wl1271 and wl1273.
Also the definition in Kconfig and header files changed respectively.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-22 16:45:09 +02:00

486 lines
13 KiB
C

/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include "wl12xx.h"
#include "io.h"
#include "reg.h"
#include "ps.h"
#include "tx.h"
static int wl1271_alloc_tx_id(struct wl1271 *wl, struct sk_buff *skb)
{
int id;
id = find_first_zero_bit(wl->tx_frames_map, ACX_TX_DESCRIPTORS);
if (id >= ACX_TX_DESCRIPTORS)
return -EBUSY;
__set_bit(id, wl->tx_frames_map);
wl->tx_frames[id] = skb;
wl->tx_frames_cnt++;
return id;
}
static void wl1271_free_tx_id(struct wl1271 *wl, int id)
{
if (__test_and_clear_bit(id, wl->tx_frames_map)) {
wl->tx_frames[id] = NULL;
wl->tx_frames_cnt--;
}
}
static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
u32 buf_offset)
{
struct wl1271_tx_hw_descr *desc;
u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra;
u32 total_blocks;
int id, ret = -EBUSY;
if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE)
return -EAGAIN;
/* allocate free identifier for the packet */
id = wl1271_alloc_tx_id(wl, skb);
if (id < 0)
return id;
/* approximate the number of blocks required for this packet
in the firmware */
total_blocks = total_len + TX_HW_BLOCK_SIZE - 1;
total_blocks = total_blocks / TX_HW_BLOCK_SIZE + TX_HW_BLOCK_SPARE;
if (total_blocks <= wl->tx_blocks_available) {
desc = (struct wl1271_tx_hw_descr *)skb_push(
skb, total_len - skb->len);
desc->extra_mem_blocks = TX_HW_BLOCK_SPARE;
desc->total_mem_blocks = total_blocks;
desc->id = id;
wl->tx_blocks_available -= total_blocks;
ret = 0;
wl1271_debug(DEBUG_TX,
"tx_allocate: size: %d, blocks: %d, id: %d",
total_len, total_blocks, id);
} else {
wl1271_free_tx_id(wl, id);
}
return ret;
}
static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
u32 extra, struct ieee80211_tx_info *control)
{
struct timespec ts;
struct wl1271_tx_hw_descr *desc;
int pad, ac;
s64 hosttime;
u16 tx_attr;
desc = (struct wl1271_tx_hw_descr *) skb->data;
/* relocate space for security header */
if (extra) {
void *framestart = skb->data + sizeof(*desc);
u16 fc = *(u16 *)(framestart + extra);
int hdrlen = ieee80211_hdrlen(cpu_to_le16(fc));
memmove(framestart, framestart + extra, hdrlen);
}
/* configure packet life time */
getnstimeofday(&ts);
hosttime = (timespec_to_ns(&ts) >> 10);
desc->start_time = cpu_to_le32(hosttime - wl->time_offset);
desc->life_time = cpu_to_le16(TX_HW_MGMT_PKT_LIFETIME_TU);
/* configure the tx attributes */
tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
/* queue (we use same identifiers for tid's and ac's */
ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
desc->tid = ac;
desc->aid = TX_HW_DEFAULT_AID;
desc->reserved = 0;
/* align the length (and store in terms of words) */
pad = WL1271_TX_ALIGN(skb->len);
desc->length = cpu_to_le16(pad >> 2);
/* calculate number of padding bytes */
pad = pad - skb->len;
tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
/* if the packets are destined for AP (have a STA entry) send them
with AP rate policies, otherwise use default basic rates */
if (control->control.sta)
tx_attr |= ACX_TX_AP_FULL_RATE << TX_HW_ATTR_OFST_RATE_POLICY;
desc->tx_attr = cpu_to_le16(tx_attr);
wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad);
}
/* caller must hold wl->mutex */
static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
u32 buf_offset)
{
struct ieee80211_tx_info *info;
u32 extra = 0;
int ret = 0;
u8 idx;
u32 total_len;
if (!skb)
return -EINVAL;
info = IEEE80211_SKB_CB(skb);
if (info->control.hw_key &&
info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP)
extra = WL1271_TKIP_IV_SPACE;
if (info->control.hw_key) {
idx = info->control.hw_key->hw_key_idx;
/* FIXME: do we have to do this if we're not using WEP? */
if (unlikely(wl->default_key != idx)) {
ret = wl1271_cmd_set_default_wep_key(wl, idx);
if (ret < 0)
return ret;
wl->default_key = idx;
}
}
ret = wl1271_tx_allocate(wl, skb, extra, buf_offset);
if (ret < 0)
return ret;
wl1271_tx_fill_hdr(wl, skb, extra, info);
/*
* The length of each packet is stored in terms of words. Thus, we must
* pad the skb data to make sure its length is aligned.
* The number of padding bytes is computed and set in wl1271_tx_fill_hdr
*/
total_len = WL1271_TX_ALIGN(skb->len);
memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len);
memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len);
return total_len;
}
u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
{
struct ieee80211_supported_band *band;
u32 enabled_rates = 0;
int bit;
band = wl->hw->wiphy->bands[wl->band];
for (bit = 0; bit < band->n_bitrates; bit++) {
if (rate_set & 0x1)
enabled_rates |= band->bitrates[bit].hw_value;
rate_set >>= 1;
}
#ifdef CONFIG_WL12XX_HT
/* MCS rates indication are on bits 16 - 23 */
rate_set >>= HW_HT_RATES_OFFSET - band->n_bitrates;
for (bit = 0; bit < 8; bit++) {
if (rate_set & 0x1)
enabled_rates |= (CONF_HW_BIT_RATE_MCS_0 << bit);
rate_set >>= 1;
}
#endif
return enabled_rates;
}
static void handle_tx_low_watermark(struct wl1271 *wl)
{
unsigned long flags;
if (test_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags) &&
skb_queue_len(&wl->tx_queue) <= WL1271_TX_QUEUE_LOW_WATERMARK) {
/* firmware buffer has space, restart queues */
spin_lock_irqsave(&wl->wl_lock, flags);
ieee80211_wake_queues(wl->hw);
clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
spin_unlock_irqrestore(&wl->wl_lock, flags);
}
}
void wl1271_tx_work_locked(struct wl1271 *wl)
{
struct sk_buff *skb;
bool woken_up = false;
u32 sta_rates = 0;
u32 buf_offset = 0;
bool sent_packets = false;
int ret;
/* check if the rates supported by the AP have changed */
if (unlikely(test_and_clear_bit(WL1271_FLAG_STA_RATES_CHANGED,
&wl->flags))) {
unsigned long flags;
spin_lock_irqsave(&wl->wl_lock, flags);
sta_rates = wl->sta_rate_set;
spin_unlock_irqrestore(&wl->wl_lock, flags);
}
if (unlikely(wl->state == WL1271_STATE_OFF))
goto out;
/* if rates have changed, re-configure the rate policy */
if (unlikely(sta_rates)) {
ret = wl1271_ps_elp_wakeup(wl, false);
if (ret < 0)
goto out;
woken_up = true;
wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates);
wl1271_acx_rate_policies(wl);
}
while ((skb = skb_dequeue(&wl->tx_queue))) {
if (!woken_up) {
ret = wl1271_ps_elp_wakeup(wl, false);
if (ret < 0)
goto out_ack;
woken_up = true;
}
ret = wl1271_prepare_tx_frame(wl, skb, buf_offset);
if (ret == -EAGAIN) {
/*
* Aggregation buffer is full.
* Flush buffer and try again.
*/
skb_queue_head(&wl->tx_queue, skb);
wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
buf_offset, true);
sent_packets = true;
buf_offset = 0;
continue;
} else if (ret == -EBUSY) {
/*
* Firmware buffer is full.
* Queue back last skb, and stop aggregating.
*/
skb_queue_head(&wl->tx_queue, skb);
/* No work left, avoid scheduling redundant tx work */
set_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
goto out_ack;
} else if (ret < 0) {
dev_kfree_skb(skb);
goto out_ack;
}
buf_offset += ret;
wl->tx_packets_count++;
}
out_ack:
if (buf_offset) {
wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
buf_offset, true);
sent_packets = true;
}
if (sent_packets) {
/* interrupt the firmware with the new packets */
wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
handle_tx_low_watermark(wl);
}
out:
if (woken_up)
wl1271_ps_elp_sleep(wl);
}
void wl1271_tx_work(struct work_struct *work)
{
struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
mutex_lock(&wl->mutex);
wl1271_tx_work_locked(wl);
mutex_unlock(&wl->mutex);
}
static void wl1271_tx_complete_packet(struct wl1271 *wl,
struct wl1271_tx_hw_res_descr *result)
{
struct ieee80211_tx_info *info;
struct sk_buff *skb;
int id = result->id;
int rate = -1;
u8 retries = 0;
/* check for id legality */
if (unlikely(id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL)) {
wl1271_warning("TX result illegal id: %d", id);
return;
}
skb = wl->tx_frames[id];
info = IEEE80211_SKB_CB(skb);
/* update the TX status info */
if (result->status == TX_SUCCESS) {
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
info->flags |= IEEE80211_TX_STAT_ACK;
rate = wl1271_rate_to_idx(result->rate_class_index, wl->band);
retries = result->ack_failures;
} else if (result->status == TX_RETRY_EXCEEDED) {
wl->stats.excessive_retries++;
retries = result->ack_failures;
}
info->status.rates[0].idx = rate;
info->status.rates[0].count = retries;
info->status.rates[0].flags = 0;
info->status.ack_signal = -1;
wl->stats.retry_count += result->ack_failures;
/* update security sequence number */
wl->tx_security_seq += (result->lsb_security_sequence_number -
wl->tx_security_last_seq);
wl->tx_security_last_seq = result->lsb_security_sequence_number;
/* remove private header from packet */
skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
/* remove TKIP header space if present */
if (info->control.hw_key &&
info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data, hdrlen);
skb_pull(skb, WL1271_TKIP_IV_SPACE);
}
wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
" status 0x%x",
result->id, skb, result->ack_failures,
result->rate_class_index, result->status);
/* return the packet to the stack */
ieee80211_tx_status(wl->hw, skb);
wl1271_free_tx_id(wl, result->id);
}
/* Called upon reception of a TX complete interrupt */
void wl1271_tx_complete(struct wl1271 *wl)
{
struct wl1271_acx_mem_map *memmap =
(struct wl1271_acx_mem_map *)wl->target_mem_map;
u32 count, fw_counter;
u32 i;
/* read the tx results from the chipset */
wl1271_read(wl, le32_to_cpu(memmap->tx_result),
wl->tx_res_if, sizeof(*wl->tx_res_if), false);
fw_counter = le32_to_cpu(wl->tx_res_if->tx_result_fw_counter);
/* write host counter to chipset (to ack) */
wl1271_write32(wl, le32_to_cpu(memmap->tx_result) +
offsetof(struct wl1271_tx_hw_res_if,
tx_result_host_counter), fw_counter);
count = fw_counter - wl->tx_results_count;
wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
/* verify that the result buffer is not getting overrun */
if (unlikely(count > TX_HW_RESULT_QUEUE_LEN))
wl1271_warning("TX result overflow from chipset: %d", count);
/* process the results */
for (i = 0; i < count; i++) {
struct wl1271_tx_hw_res_descr *result;
u8 offset = wl->tx_results_count & TX_HW_RESULT_QUEUE_LEN_MASK;
/* process the packet */
result = &(wl->tx_res_if->tx_results_queue[offset]);
wl1271_tx_complete_packet(wl, result);
wl->tx_results_count++;
}
}
/* caller must hold wl->mutex */
void wl1271_tx_reset(struct wl1271 *wl)
{
int i;
struct sk_buff *skb;
/* TX failure */
while ((skb = skb_dequeue(&wl->tx_queue))) {
wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
ieee80211_tx_status(wl->hw, skb);
}
/*
* Make sure the driver is at a consistent state, in case this
* function is called from a context other than interface removal.
*/
handle_tx_low_watermark(wl);
for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
if (wl->tx_frames[i] != NULL) {
skb = wl->tx_frames[i];
wl1271_free_tx_id(wl, i);
wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
ieee80211_tx_status(wl->hw, skb);
}
}
#define WL1271_TX_FLUSH_TIMEOUT 500000
/* caller must *NOT* hold wl->mutex */
void wl1271_tx_flush(struct wl1271 *wl)
{
unsigned long timeout;
timeout = jiffies + usecs_to_jiffies(WL1271_TX_FLUSH_TIMEOUT);
while (!time_after(jiffies, timeout)) {
mutex_lock(&wl->mutex);
wl1271_debug(DEBUG_TX, "flushing tx buffer: %d",
wl->tx_frames_cnt);
if ((wl->tx_frames_cnt == 0) &&
skb_queue_empty(&wl->tx_queue)) {
mutex_unlock(&wl->mutex);
return;
}
mutex_unlock(&wl->mutex);
msleep(1);
}
wl1271_warning("Unable to flush all TX buffers, timed out.");
}