linux/drivers/Makefile
Linus Torvalds dab363f938 Staging patches for 3.19-rc1
Here's the big staging tree pull request for 3.19-rc1.
 
 We continued to delete more lines than were added, always a good thing,
 but not at a huge rate this release, only about 70k lines removed
 overall mostly from removing the horrid bcm driver.
 
 Lots of normal staging driver cleanups and fixes all over the place,
 well over a thousand of them, the shortlog shows all the horrid details.
 
 The "contentious" thing here is the movement of the Android binder code
 out of staging into the "real" part of the kernel.  This is code that
 has been stable for a few years now and is working as-is in the tens of
 millions of devices with no issues.  Yes, the code is horrid, and the
 userspace api leaves a lot to be desired, but it's not going to change
 due to legacy issues that we have no control over.  Because so many
 devices and companies rely on this, and the code is stable, might as
 well promote it out of staging.
 
 This was all discussed at the Linux Plumbers conference, and everyone
 participating agreed that this was the best way forward.
 
 There is work happening to replace the binder code with something new
 that is happening right now, but I don't expect to see the results of
 that work for another year at the earliest.  If that ever happens, and
 Android switches over to it, I'll gladly remove this version.
 
 As for maintainers, I'll be glad to maintain this code, I've been doing
 it for the past few years with no problems.  I'll send a MAINTAINERS
 entry for it before 3.19-final is out, still need to talk to the Google
 developers about if they are willing to help with it or not, last I
 checked they were, which was good.
 
 All of these patches have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSPICkACgkQMUfUDdst+yksdwCfSLE9VUy1o2sAPDRe+J3bQced
 EWEAoL3RtnejKbo5tHS2IT69pLrwiIDS
 =YXyM
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the big staging tree pull request for 3.19-rc1.

  We continued to delete more lines than were added, always a good
  thing, but not at a huge rate this release, only about 70k lines
  removed overall mostly from removing the horrid bcm driver.

  Lots of normal staging driver cleanups and fixes all over the place,
  well over a thousand of them, the shortlog shows all the horrid
  details.

  The "contentious" thing here is the movement of the Android binder
  code out of staging into the "real" part of the kernel.  This is code
  that has been stable for a few years now and is working as-is in the
  tens of millions of devices with no issues.  Yes, the code is horrid,
  and the userspace api leaves a lot to be desired, but it's not going
  to change due to legacy issues that we have no control over.  Because
  so many devices and companies rely on this, and the code is stable,
  might as well promote it out of staging.

  This was all discussed at the Linux Plumbers conference, and everyone
  participating agreed that this was the best way forward.

  There is work happening to replace the binder code with something new
  that is happening right now, but I don't expect to see the results of
  that work for another year at the earliest.  If that ever happens, and
  Android switches over to it, I'll gladly remove this version.

  As for maintainers, I'll be glad to maintain this code, I've been
  doing it for the past few years with no problems.  I'll send a
  MAINTAINERS entry for it before 3.19-final is out, still need to talk
  to the Google developers about if they are willing to help with it or
  not, last I checked they were, which was good.

  All of these patches have been in linux-next for a while with no
  reported issues"

* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
  Staging: slicoss: Fix long line issues in slicoss.c
  staging: rtl8712: remove unnecessary else after return
  staging: comedi: change some printk calls to pr_err
  staging: rtl8723au: hal: Removed the extra semicolon
  lustre: Deletion of unnecessary checks before three function calls
  staging: lustre: fix sparse warnings: static function declaration
  staging: lustre: fixed sparse warnings related to static declarations
  staging: unisys: remove duplicate header
  staging: unisys: remove unneeded structure
  staging: ft1000 : replace __attribute ((__packed__) with __packed
  drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
  Drivers:staging:rtl8192e: Fixed checkpatch warning
  Drivers:staging:clocking-wizard: Added a newline
  staging: clocking-wizard: check for a valid clk_name pointer
  staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
  staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
  staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
  staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
  staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
  staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
  ...
2014-12-15 18:06:13 -08:00

166 lines
4.6 KiB
Makefile

#
# Makefile for the Linux kernel device drivers.
#
# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
obj-y += irqchip/
obj-y += bus/
obj-$(CONFIG_GENERIC_PHY) += phy/
# GPIO must come after pinctrl as gpios may need to mux pins etc
obj-y += pinctrl/
obj-y += gpio/
obj-y += pwm/
obj-$(CONFIG_PCI) += pci/
obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
obj-y += video/
obj-y += idle/
# IPMI must come before ACPI in order to provide IPMI opregion support
obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/
obj-$(CONFIG_ACPI) += acpi/
obj-$(CONFIG_SFI) += sfi/
# PnP must come after ACPI since it will eventually need to check if acpi
# was used and do nothing if so
obj-$(CONFIG_PNP) += pnp/
obj-y += amba/
# Many drivers will want to use DMA so this has to be made available
# really early.
obj-$(CONFIG_DMADEVICES) += dma/
# SOC specific infrastructure drivers.
obj-y += soc/
obj-$(CONFIG_VIRTIO) += virtio/
obj-$(CONFIG_XEN) += xen/
# regulators early, since some subsystems rely on them to initialize
obj-$(CONFIG_REGULATOR) += regulator/
# reset controllers early, since gpu drivers might rely on them to initialize
obj-$(CONFIG_RESET_CONTROLLER) += reset/
# tty/ comes before char/ so that the VT console is the boot-time
# default.
obj-y += tty/
obj-y += char/
# gpu/ comes after char for AGP vs DRM startup
obj-y += gpu/
obj-$(CONFIG_CONNECTOR) += connector/
# i810fb and intelfb depend on char/agp/
obj-$(CONFIG_FB_I810) += video/fbdev/i810/
obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
obj-$(CONFIG_PARPORT) += parport/
obj-y += base/ block/ misc/ mfd/ nfc/
obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
obj-$(CONFIG_NUBUS) += nubus/
obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
obj-$(CONFIG_SPMI) += spmi/
obj-y += hsi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/
obj-y += firewire/
obj-$(CONFIG_UIO) += uio/
obj-$(CONFIG_VFIO) += vfio/
obj-y += cdrom/
obj-y += auxdisplay/
obj-$(CONFIG_PCCARD) += pcmcia/
obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
obj-$(CONFIG_ZORRO) += zorro/
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
obj-$(CONFIG_PARIDE) += block/paride/
obj-$(CONFIG_TC) += tc/
obj-$(CONFIG_UWB) += uwb/
obj-$(CONFIG_USB_PHY) += usb/
obj-$(CONFIG_USB) += usb/
obj-$(CONFIG_PCI) += usb/
obj-$(CONFIG_USB_GADGET) += usb/
obj-$(CONFIG_SERIO) += input/serio/
obj-$(CONFIG_GAMEPORT) += input/gameport/
obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_RTC_LIB) += rtc/
obj-y += i2c/ media/
obj-$(CONFIG_PPS) += pps/
obj-$(CONFIG_PTP_1588_CLOCK) += ptp/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_POWER_SUPPLY) += power/
obj-$(CONFIG_HWMON) += hwmon/
obj-$(CONFIG_THERMAL) += thermal/
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BT) += bluetooth/
obj-$(CONFIG_ACCESSIBILITY) += accessibility/
obj-$(CONFIG_ISDN) += isdn/
obj-$(CONFIG_EDAC) += edac/
obj-$(CONFIG_EISA) += eisa/
obj-y += lguest/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_CPU_IDLE) += cpuidle/
obj-y += mmc/
obj-$(CONFIG_MEMSTICK) += memstick/
obj-y += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
obj-$(CONFIG_ARCH_SHMOBILE) += sh/
ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
obj-y += clocksource/
endif
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_BCMA) += bcma/
obj-$(CONFIG_VHOST_RING) += vhost/
obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_STAGING) += staging/
obj-y += platform/
#common clk code
obj-y += clk/
obj-$(CONFIG_MAILBOX) += mailbox/
obj-$(CONFIG_HWSPINLOCK) += hwspinlock/
obj-$(CONFIG_IOMMU_SUPPORT) += iommu/
obj-$(CONFIG_REMOTEPROC) += remoteproc/
obj-$(CONFIG_RPMSG) += rpmsg/
# Virtualization drivers
obj-$(CONFIG_VIRT_DRIVERS) += virt/
obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_PM_DEVFREQ) += devfreq/
obj-$(CONFIG_EXTCON) += extcon/
obj-$(CONFIG_MEMORY) += memory/
obj-$(CONFIG_IIO) += iio/
obj-$(CONFIG_VME_BUS) += vme/
obj-$(CONFIG_IPACK_BUS) += ipack/
obj-$(CONFIG_NTB) += ntb/
obj-$(CONFIG_FMC) += fmc/
obj-$(CONFIG_POWERCAP) += powercap/
obj-$(CONFIG_MCB) += mcb/
obj-$(CONFIG_RAS) += ras/
obj-$(CONFIG_THUNDERBOLT) += thunderbolt/
obj-$(CONFIG_CORESIGHT) += coresight/
obj-$(CONFIG_ANDROID) += android/