linux/arch/arm/mach-davinci/Kconfig
Sudhakar Rajashekhara 0fbc559215 davinci: Add support for DA850/OMAP-L138 EVM board
Add support for the DA850/OMAP-L138 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) card which contains
various devices. This UI card can be connected to the base
board. Support for all the devices on the UI card and ones on
the EVM will be added in subsequent patches.

The EVM schematics are not available publicly yet; but should
be available soon.

A new defconfig for this board has been added mainly because
the DA830/OMAP-L137 defconfig forces writethrough cache mode
which is not required on DA850/OMAP-L138.

This patch has been boot tested on DA850/OMAP-L138 EVM
using ramdisk as filesystem.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:45 +03:00

151 lines
3.8 KiB
Plaintext

if ARCH_DAVINCI
config AINTC
bool
config CP_INTC
bool
config ARCH_DAVINCI_DMx
bool
menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DM355
bool "DaVinci 355 based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DM646x
bool "DaVinci 646x based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
config ARCH_DAVINCI_DA8XX
bool
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
select AINTC
select ARCH_DAVINCI_DMx
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
bool "TI DM644x EVM"
default ARCH_DAVINCI_DM644x
depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
config MACH_SFFSDR
bool "Lyrtech SFFSDR"
depends on ARCH_DAVINCI_DM644x
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
config MACH_DAVINCI_DM355_EVM
bool "TI DM355 EVM"
default ARCH_DAVINCI_DM355
depends on ARCH_DAVINCI_DM355
help
Configure this option to specify the whether the board used
for development is a DM355 EVM
config MACH_DM355_LEOPARD
bool "DM355 Leopard board"
depends on ARCH_DAVINCI_DM355
help
Configure this option to specify the whether the board used
for development is a DM355 Leopard board.
config MACH_DAVINCI_DM6467_EVM
bool "TI DM6467 EVM"
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
config MACH_DAVINCI_DM365_EVM
bool "TI DM365 EVM"
default ARCH_DAVINCI_DM365
depends on ARCH_DAVINCI_DM365
help
Configure this option to specify whether the board used
for development is a DM365 EVM
config MACH_DAVINCI_DA830_EVM
bool "TI DA830/OMAP-L137 Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
help
Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
config MACH_DAVINCI_DA850_EVM
bool "TI DA850/OMAP-L138 Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
help
Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI
default y
help
Pin multiplexing support for DAVINCI boards. If your bootloader
sets the multiplexing correctly, say N. Otherwise, or if unsure,
say Y.
config DAVINCI_MUX_DEBUG
bool "Multiplexing debug output"
depends on DAVINCI_MUX
help
Makes the multiplexing functions print out a lot of debug info.
This is useful if you want to find out the correct values of the
multiplexing registers.
config DAVINCI_MUX_WARNINGS
bool "Warn about pins the bootloader didn't set up"
depends on DAVINCI_MUX
help
Choose Y here to warn whenever driver initialization logic needs
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect DAVINCI_MUX for your product.
config DAVINCI_RESET_CLOCKS
bool "Reset unused clocks during boot"
depends on ARCH_DAVINCI
help
Say Y if you want to reset unused clocks during boot.
This option saves power, but assumes all drivers are
using the clock framework. Broken drivers that do not
yet use clock framework may not work with this option.
If you are booting from another operating system, you
probably do not want this option enabled until your
device drivers work properly.
endmenu
endif