linux/drivers/iio/dac/m62332.c
Jonathan Cameron 671d2c605b iio:dac:m62332: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards.

Note that in this case the storage for saving state was protected
by CONFIG_PM guards. The storage is very small and unlikely to make
any real difference to the space allocated for state so just drop
those guards.

Removing instances of this approach from IIO also stops them being
copied into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-41-jic23@kernel.org
2022-02-18 11:46:03 +00:00

253 lines
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* m62332.c - Support for Mitsubishi m62332 DAC
*
* Copyright (c) 2014 Dmitry Eremin-Solenikov
*
* Based on max517 driver:
* Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/iio/iio.h>
#include <linux/iio/driver.h>
#include <linux/regulator/consumer.h>
#define M62332_CHANNELS 2
struct m62332_data {
struct i2c_client *client;
struct regulator *vcc;
struct mutex mutex;
u8 raw[M62332_CHANNELS];
u8 save[M62332_CHANNELS];
};
static int m62332_set_value(struct iio_dev *indio_dev, u8 val, int channel)
{
struct m62332_data *data = iio_priv(indio_dev);
struct i2c_client *client = data->client;
u8 outbuf[2];
int res;
if (val == data->raw[channel])
return 0;
outbuf[0] = channel;
outbuf[1] = val;
mutex_lock(&data->mutex);
if (val) {
res = regulator_enable(data->vcc);
if (res)
goto out;
}
res = i2c_master_send(client, outbuf, ARRAY_SIZE(outbuf));
if (res >= 0 && res != ARRAY_SIZE(outbuf))
res = -EIO;
if (res < 0)
goto out;
data->raw[channel] = val;
if (!val)
regulator_disable(data->vcc);
mutex_unlock(&data->mutex);
return 0;
out:
mutex_unlock(&data->mutex);
return res;
}
static int m62332_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long mask)
{
struct m62332_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
/* Corresponds to Vref / 2^(bits) */
ret = regulator_get_voltage(data->vcc);
if (ret < 0)
return ret;
*val = ret / 1000; /* mV */
*val2 = 8;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_CHAN_INFO_RAW:
*val = data->raw[chan->channel];
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
*val = 1;
return IIO_VAL_INT;
default:
break;
}
return -EINVAL;
}
static int m62332_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2,
long mask)
{
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (val < 0 || val > 255)
return -EINVAL;
return m62332_set_value(indio_dev, val, chan->channel);
default:
break;
}
return -EINVAL;
}
static int m62332_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct m62332_data *data = iio_priv(indio_dev);
int ret;
data->save[0] = data->raw[0];
data->save[1] = data->raw[1];
ret = m62332_set_value(indio_dev, 0, 0);
if (ret < 0)
return ret;
return m62332_set_value(indio_dev, 0, 1);
}
static int m62332_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct m62332_data *data = iio_priv(indio_dev);
int ret;
ret = m62332_set_value(indio_dev, data->save[0], 0);
if (ret < 0)
return ret;
return m62332_set_value(indio_dev, data->save[1], 1);
}
static DEFINE_SIMPLE_DEV_PM_OPS(m62332_pm_ops, m62332_suspend, m62332_resume);
static const struct iio_info m62332_info = {
.read_raw = m62332_read_raw,
.write_raw = m62332_write_raw,
};
#define M62332_CHANNEL(chan) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
.channel = (chan), \
.datasheet_name = "CH" #chan, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_OFFSET), \
}
static const struct iio_chan_spec m62332_channels[M62332_CHANNELS] = {
M62332_CHANNEL(0),
M62332_CHANNEL(1)
};
static int m62332_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct m62332_data *data;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
mutex_init(&data->mutex);
data->vcc = devm_regulator_get(&client->dev, "VCC");
if (IS_ERR(data->vcc))
return PTR_ERR(data->vcc);
indio_dev->num_channels = ARRAY_SIZE(m62332_channels);
indio_dev->channels = m62332_channels;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &m62332_info;
ret = iio_map_array_register(indio_dev, client->dev.platform_data);
if (ret < 0)
return ret;
ret = iio_device_register(indio_dev);
if (ret < 0)
goto err;
return 0;
err:
iio_map_array_unregister(indio_dev);
return ret;
}
static int m62332_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
iio_map_array_unregister(indio_dev);
m62332_set_value(indio_dev, 0, 0);
m62332_set_value(indio_dev, 0, 1);
return 0;
}
static const struct i2c_device_id m62332_id[] = {
{ "m62332", },
{ }
};
MODULE_DEVICE_TABLE(i2c, m62332_id);
static struct i2c_driver m62332_driver = {
.driver = {
.name = "m62332",
.pm = pm_sleep_ptr(&m62332_pm_ops),
},
.probe = m62332_probe,
.remove = m62332_remove,
.id_table = m62332_id,
};
module_i2c_driver(m62332_driver);
MODULE_AUTHOR("Dmitry Eremin-Solenikov");
MODULE_DESCRIPTION("M62332 8-bit DAC");
MODULE_LICENSE("GPL v2");