linux/drivers/input/misc/ad714x-i2c.c
Bill Pemberton 5298cc4cc7 Input: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24 00:05:19 -08:00

124 lines
2.8 KiB
C

/*
* AD714X CapTouch Programmable Controller driver (I2C bus)
*
* Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/input.h> /* BUS_I2C */
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pm.h>
#include "ad714x.h"
#ifdef CONFIG_PM
static int ad714x_i2c_suspend(struct device *dev)
{
return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev)));
}
static int ad714x_i2c_resume(struct device *dev)
{
return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev)));
}
#endif
static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume);
static int ad714x_i2c_write(struct ad714x_chip *chip,
unsigned short reg, unsigned short data)
{
struct i2c_client *client = to_i2c_client(chip->dev);
int error;
chip->xfer_buf[0] = cpu_to_be16(reg);
chip->xfer_buf[1] = cpu_to_be16(data);
error = i2c_master_send(client, (u8 *)chip->xfer_buf,
2 * sizeof(*chip->xfer_buf));
if (unlikely(error < 0)) {
dev_err(&client->dev, "I2C write error: %d\n", error);
return error;
}
return 0;
}
static int ad714x_i2c_read(struct ad714x_chip *chip,
unsigned short reg, unsigned short *data, size_t len)
{
struct i2c_client *client = to_i2c_client(chip->dev);
int i;
int error;
chip->xfer_buf[0] = cpu_to_be16(reg);
error = i2c_master_send(client, (u8 *)chip->xfer_buf,
sizeof(*chip->xfer_buf));
if (error >= 0)
error = i2c_master_recv(client, (u8 *)chip->xfer_buf,
len * sizeof(*chip->xfer_buf));
if (unlikely(error < 0)) {
dev_err(&client->dev, "I2C read error: %d\n", error);
return error;
}
for (i = 0; i < len; i++)
data[i] = be16_to_cpu(chip->xfer_buf[i]);
return 0;
}
static int ad714x_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ad714x_chip *chip;
chip = ad714x_probe(&client->dev, BUS_I2C, client->irq,
ad714x_i2c_read, ad714x_i2c_write);
if (IS_ERR(chip))
return PTR_ERR(chip);
i2c_set_clientdata(client, chip);
return 0;
}
static int __devexit ad714x_i2c_remove(struct i2c_client *client)
{
struct ad714x_chip *chip = i2c_get_clientdata(client);
ad714x_remove(chip);
return 0;
}
static const struct i2c_device_id ad714x_id[] = {
{ "ad7142_captouch", 0 },
{ "ad7143_captouch", 0 },
{ "ad7147_captouch", 0 },
{ "ad7147a_captouch", 0 },
{ "ad7148_captouch", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ad714x_id);
static struct i2c_driver ad714x_i2c_driver = {
.driver = {
.name = "ad714x_captouch",
.pm = &ad714x_i2c_pm,
},
.probe = ad714x_i2c_probe,
.remove = ad714x_i2c_remove,
.id_table = ad714x_id,
};
module_i2c_driver(ad714x_i2c_driver);
MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver");
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_LICENSE("GPL");