mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
1344500e2d
Since the VIC was converted to use generic IRQ domains IRQ 0 is silently ignored. This IRQ is used on the U300 so we're missing it now. Bump all IRQ numbers by one since they are now decoupled from the hardware IRQ numbers. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1869 lines
54 KiB
C
1869 lines
54 KiB
C
/*
|
|
*
|
|
* arch/arm/mach-u300/core.c
|
|
*
|
|
*
|
|
* Copyright (C) 2007-2010 ST-Ericsson SA
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
* Core platform support, IRQ handling and device definitions.
|
|
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/termios.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/mmci.h>
|
|
#include <linux/amba/serial.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/fsmc.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/hardware/vic.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/coh901318.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/syscon.h>
|
|
#include <mach/dma_channels.h>
|
|
#include <mach/gpio-u300.h>
|
|
|
|
#include "clock.h"
|
|
#include "spi.h"
|
|
#include "i2c.h"
|
|
#include "u300-gpio.h"
|
|
|
|
/*
|
|
* Static I/O mappings that are needed for booting the U300 platforms. The
|
|
* only things we need are the areas where we find the timer, syscon and
|
|
* intcon, since the remaining device drivers will map their own memory
|
|
* physical to virtual as the need arise.
|
|
*/
|
|
static struct map_desc u300_io_desc[] __initdata = {
|
|
{
|
|
.virtual = U300_SLOW_PER_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
|
|
.length = SZ_64K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
{
|
|
.virtual = U300_AHB_PER_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
|
|
.length = SZ_32K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
{
|
|
.virtual = U300_FAST_PER_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
|
|
.length = SZ_32K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
void __init u300_map_io(void)
|
|
{
|
|
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
|
|
/* We enable a real big DMA buffer if need be. */
|
|
init_consistent_dma_size(SZ_4M);
|
|
}
|
|
|
|
/*
|
|
* Declaration of devices found on the U300 board and
|
|
* their respective memory locations.
|
|
*/
|
|
|
|
static struct amba_pl011_data uart0_plat_data = {
|
|
#ifdef CONFIG_COH901318
|
|
.dma_filter = coh901318_filter_id,
|
|
.dma_rx_param = (void *) U300_DMA_UART0_RX,
|
|
.dma_tx_param = (void *) U300_DMA_UART0_TX,
|
|
#endif
|
|
};
|
|
|
|
/* Slow device at 0x3000 offset */
|
|
static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
|
|
{ IRQ_U300_UART0 }, &uart0_plat_data);
|
|
|
|
/* The U335 have an additional UART1 on the APP CPU */
|
|
#ifdef CONFIG_MACH_U300_BS335
|
|
static struct amba_pl011_data uart1_plat_data = {
|
|
#ifdef CONFIG_COH901318
|
|
.dma_filter = coh901318_filter_id,
|
|
.dma_rx_param = (void *) U300_DMA_UART1_RX,
|
|
.dma_tx_param = (void *) U300_DMA_UART1_TX,
|
|
#endif
|
|
};
|
|
|
|
/* Fast device at 0x7000 offset */
|
|
static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
|
|
{ IRQ_U300_UART1 }, &uart1_plat_data);
|
|
#endif
|
|
|
|
/* AHB device at 0x4000 offset */
|
|
static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
|
|
|
|
/* Fast device at 0x6000 offset */
|
|
static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
|
|
{ IRQ_U300_SPI }, NULL);
|
|
|
|
/* Fast device at 0x1000 offset */
|
|
#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
|
|
|
|
static struct mmci_platform_data mmcsd_platform_data = {
|
|
/*
|
|
* Do not set ocr_mask or voltage translation function,
|
|
* we have a regulator we can control instead.
|
|
*/
|
|
.f_max = 24000000,
|
|
.gpio_wp = -1,
|
|
.gpio_cd = U300_GPIO_PIN_MMC_CD,
|
|
.cd_invert = true,
|
|
.capabilities = MMC_CAP_MMC_HIGHSPEED |
|
|
MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
|
#ifdef CONFIG_COH901318
|
|
.dma_filter = coh901318_filter_id,
|
|
.dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX,
|
|
/* Don't specify a TX channel, this RX channel is bidirectional */
|
|
#endif
|
|
};
|
|
|
|
static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
|
|
U300_MMCSD_IRQS, &mmcsd_platform_data);
|
|
|
|
/*
|
|
* The order of device declaration may be important, since some devices
|
|
* have dependencies on other devices being initialized first.
|
|
*/
|
|
static struct amba_device *amba_devs[] __initdata = {
|
|
&uart0_device,
|
|
#ifdef CONFIG_MACH_U300_BS335
|
|
&uart1_device,
|
|
#endif
|
|
&pl022_device,
|
|
&pl172_device,
|
|
&mmcsd_device,
|
|
};
|
|
|
|
/* Here follows a list of all hw resources that the platform devices
|
|
* allocate. Note, clock dependencies are not included
|
|
*/
|
|
|
|
static struct resource gpio_resources[] = {
|
|
{
|
|
.start = U300_GPIO_BASE,
|
|
.end = (U300_GPIO_BASE + SZ_4K - 1),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "gpio0",
|
|
.start = IRQ_U300_GPIO_PORT0,
|
|
.end = IRQ_U300_GPIO_PORT0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "gpio1",
|
|
.start = IRQ_U300_GPIO_PORT1,
|
|
.end = IRQ_U300_GPIO_PORT1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "gpio2",
|
|
.start = IRQ_U300_GPIO_PORT2,
|
|
.end = IRQ_U300_GPIO_PORT2,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
|
|
{
|
|
.name = "gpio3",
|
|
.start = IRQ_U300_GPIO_PORT3,
|
|
.end = IRQ_U300_GPIO_PORT3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "gpio4",
|
|
.start = IRQ_U300_GPIO_PORT4,
|
|
.end = IRQ_U300_GPIO_PORT4,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_MACH_U300_BS335
|
|
{
|
|
.name = "gpio5",
|
|
.start = IRQ_U300_GPIO_PORT5,
|
|
.end = IRQ_U300_GPIO_PORT5,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "gpio6",
|
|
.start = IRQ_U300_GPIO_PORT6,
|
|
.end = IRQ_U300_GPIO_PORT6,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
#endif /* CONFIG_MACH_U300_BS335 */
|
|
};
|
|
|
|
static struct resource keypad_resources[] = {
|
|
{
|
|
.start = U300_KEYPAD_BASE,
|
|
.end = U300_KEYPAD_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "coh901461-press",
|
|
.start = IRQ_U300_KEYPAD_KEYBF,
|
|
.end = IRQ_U300_KEYPAD_KEYBF,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "coh901461-release",
|
|
.start = IRQ_U300_KEYPAD_KEYBR,
|
|
.end = IRQ_U300_KEYPAD_KEYBR,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource rtc_resources[] = {
|
|
{
|
|
.start = U300_RTC_BASE,
|
|
.end = U300_RTC_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_U300_RTC,
|
|
.end = IRQ_U300_RTC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
|
|
* but these are not yet used by the driver.
|
|
*/
|
|
static struct resource fsmc_resources[] = {
|
|
{
|
|
.name = "nand_data",
|
|
.start = U300_NAND_CS0_PHYS_BASE,
|
|
.end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "fsmc_regs",
|
|
.start = U300_NAND_IF_PHYS_BASE,
|
|
.end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct resource i2c0_resources[] = {
|
|
{
|
|
.start = U300_I2C0_BASE,
|
|
.end = U300_I2C0_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_U300_I2C0,
|
|
.end = IRQ_U300_I2C0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource i2c1_resources[] = {
|
|
{
|
|
.start = U300_I2C1_BASE,
|
|
.end = U300_I2C1_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_U300_I2C1,
|
|
.end = IRQ_U300_I2C1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
|
|
};
|
|
|
|
static struct resource wdog_resources[] = {
|
|
{
|
|
.start = U300_WDOG_BASE,
|
|
.end = U300_WDOG_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_U300_WDOG,
|
|
.end = IRQ_U300_WDOG,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct resource dma_resource[] = {
|
|
{
|
|
.start = U300_DMAC_BASE,
|
|
.end = U300_DMAC_BASE + PAGE_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_U300_DMA,
|
|
.end = IRQ_U300_DMA,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
#ifdef CONFIG_MACH_U300_BS335
|
|
/* points out all dma slave channels.
|
|
* Syntax is [A1, B1, A2, B2, .... ,-1,-1]
|
|
* Select all channels from A to B, end of list is marked with -1,-1
|
|
*/
|
|
static int dma_slave_channels[] = {
|
|
U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
|
|
U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
|
|
|
|
/* points out all dma memcpy channels. */
|
|
static int dma_memcpy_channels[] = {
|
|
U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
|
|
|
|
#else /* CONFIG_MACH_U300_BS335 */
|
|
|
|
static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
|
|
static int dma_memcpy_channels[] = {
|
|
U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
|
|
|
|
#endif
|
|
|
|
/** register dma for memory access
|
|
*
|
|
* active 1 means dma intends to access memory
|
|
* 0 means dma wont access memory
|
|
*/
|
|
static void coh901318_access_memory_state(struct device *dev, bool active)
|
|
{
|
|
}
|
|
|
|
#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
|
|
COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
|
|
COH901318_CX_CFG_LCR_DISABLE | \
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE | \
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE)
|
|
#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW | \
|
|
COH901318_CX_CTRL_TCP_DISABLE | \
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE | \
|
|
COH901318_CX_CTRL_HSP_DISABLE | \
|
|
COH901318_CX_CTRL_HSS_DISABLE | \
|
|
COH901318_CX_CTRL_DDMA_LEGACY | \
|
|
COH901318_CX_CTRL_PRDD_SOURCE)
|
|
#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW | \
|
|
COH901318_CX_CTRL_TCP_DISABLE | \
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE | \
|
|
COH901318_CX_CTRL_HSP_DISABLE | \
|
|
COH901318_CX_CTRL_HSS_DISABLE | \
|
|
COH901318_CX_CTRL_DDMA_LEGACY | \
|
|
COH901318_CX_CTRL_PRDD_SOURCE)
|
|
#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW | \
|
|
COH901318_CX_CTRL_TCP_DISABLE | \
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE | \
|
|
COH901318_CX_CTRL_HSP_DISABLE | \
|
|
COH901318_CX_CTRL_HSS_DISABLE | \
|
|
COH901318_CX_CTRL_DDMA_LEGACY | \
|
|
COH901318_CX_CTRL_PRDD_SOURCE)
|
|
|
|
const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
|
|
{
|
|
.number = U300_DMA_MSL_TX_0,
|
|
.name = "MSL TX 0",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_TX_1,
|
|
.name = "MSL TX 1",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_TX_2,
|
|
.name = "MSL TX 2",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.desc_nbr_max = 10,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_TX_3,
|
|
.name = "MSL TX 3",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_TX_4,
|
|
.name = "MSL TX 4",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_TX_5,
|
|
.name = "MSL TX 5",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_TX_6,
|
|
.name = "MSL TX 6",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_RX_0,
|
|
.name = "MSL RX 0",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_RX_1,
|
|
.name = "MSL RX 1",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli = 0,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_RX_2,
|
|
.name = "MSL RX 2",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_RX_3,
|
|
.name = "MSL RX 3",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_RX_4,
|
|
.name = "MSL RX 4",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_RX_5,
|
|
.name = "MSL RX 5",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSL_RX_6,
|
|
.name = "MSL RX 6",
|
|
.priority_high = 0,
|
|
.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
|
|
},
|
|
/*
|
|
* Don't set up device address, burst count or size of src
|
|
* or dst bus for this peripheral - handled by PrimeCell
|
|
* DMA extension.
|
|
*/
|
|
{
|
|
.number = U300_DMA_MMCSD_RX_TX,
|
|
.name = "MMCSD RX TX",
|
|
.priority_high = 0,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
|
|
},
|
|
{
|
|
.number = U300_DMA_MSPRO_TX,
|
|
.name = "MSPRO TX",
|
|
.priority_high = 0,
|
|
},
|
|
{
|
|
.number = U300_DMA_MSPRO_RX,
|
|
.name = "MSPRO RX",
|
|
.priority_high = 0,
|
|
},
|
|
/*
|
|
* Don't set up device address, burst count or size of src
|
|
* or dst bus for this peripheral - handled by PrimeCell
|
|
* DMA extension.
|
|
*/
|
|
{
|
|
.number = U300_DMA_UART0_TX,
|
|
.name = "UART0 TX",
|
|
.priority_high = 0,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
},
|
|
{
|
|
.number = U300_DMA_UART0_RX,
|
|
.name = "UART0 RX",
|
|
.priority_high = 0,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
},
|
|
{
|
|
.number = U300_DMA_APEX_TX,
|
|
.name = "APEX TX",
|
|
.priority_high = 0,
|
|
},
|
|
{
|
|
.number = U300_DMA_APEX_RX,
|
|
.name = "APEX RX",
|
|
.priority_high = 0,
|
|
},
|
|
{
|
|
.number = U300_DMA_PCM_I2S0_TX,
|
|
.name = "PCM I2S0 TX",
|
|
.priority_high = 1,
|
|
.dev_addr = U300_PCM_I2S0_BASE + 0x14,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
},
|
|
{
|
|
.number = U300_DMA_PCM_I2S0_RX,
|
|
.name = "PCM I2S0 RX",
|
|
.priority_high = 1,
|
|
.dev_addr = U300_PCM_I2S0_BASE + 0x10,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
},
|
|
{
|
|
.number = U300_DMA_PCM_I2S1_TX,
|
|
.name = "PCM I2S1 TX",
|
|
.priority_high = 1,
|
|
.dev_addr = U300_PCM_I2S1_BASE + 0x14,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_SOURCE,
|
|
},
|
|
{
|
|
.number = U300_DMA_PCM_I2S1_RX,
|
|
.name = "PCM I2S1 RX",
|
|
.priority_high = 1,
|
|
.dev_addr = U300_PCM_I2S1_BASE + 0x10,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
|
|
COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
|
|
COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
|
|
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_ENABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY |
|
|
COH901318_CX_CTRL_PRDD_DEST,
|
|
},
|
|
{
|
|
.number = U300_DMA_XGAM_CDI,
|
|
.name = "XGAM CDI",
|
|
.priority_high = 0,
|
|
},
|
|
{
|
|
.number = U300_DMA_XGAM_PDI,
|
|
.name = "XGAM PDI",
|
|
.priority_high = 0,
|
|
},
|
|
/*
|
|
* Don't set up device address, burst count or size of src
|
|
* or dst bus for this peripheral - handled by PrimeCell
|
|
* DMA extension.
|
|
*/
|
|
{
|
|
.number = U300_DMA_SPI_TX,
|
|
.name = "SPI TX",
|
|
.priority_high = 0,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
},
|
|
{
|
|
.number = U300_DMA_SPI_RX,
|
|
.name = "SPI RX",
|
|
.priority_high = 0,
|
|
.param.config = COH901318_CX_CFG_CH_DISABLE |
|
|
COH901318_CX_CFG_LCR_DISABLE |
|
|
COH901318_CX_CFG_TC_IRQ_ENABLE |
|
|
COH901318_CX_CFG_BE_IRQ_ENABLE,
|
|
.param.ctrl_lli_chained = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_DISABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
.param.ctrl_lli_last = 0 |
|
|
COH901318_CX_CTRL_TC_ENABLE |
|
|
COH901318_CX_CTRL_MASTER_MODE_M1RW |
|
|
COH901318_CX_CTRL_TCP_DISABLE |
|
|
COH901318_CX_CTRL_TC_IRQ_ENABLE |
|
|
COH901318_CX_CTRL_HSP_ENABLE |
|
|
COH901318_CX_CTRL_HSS_DISABLE |
|
|
COH901318_CX_CTRL_DDMA_LEGACY,
|
|
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_0,
|
|
.name = "GENERAL 00",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_1,
|
|
.name = "GENERAL 01",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_2,
|
|
.name = "GENERAL 02",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_3,
|
|
.name = "GENERAL 03",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_4,
|
|
.name = "GENERAL 04",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_5,
|
|
.name = "GENERAL 05",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_6,
|
|
.name = "GENERAL 06",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_7,
|
|
.name = "GENERAL 07",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_8,
|
|
.name = "GENERAL 08",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
#ifdef CONFIG_MACH_U300_BS335
|
|
{
|
|
.number = U300_DMA_UART1_TX,
|
|
.name = "UART1 TX",
|
|
.priority_high = 0,
|
|
},
|
|
{
|
|
.number = U300_DMA_UART1_RX,
|
|
.name = "UART1 RX",
|
|
.priority_high = 0,
|
|
}
|
|
#else
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_9,
|
|
.name = "GENERAL 09",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
},
|
|
{
|
|
.number = U300_DMA_GENERAL_PURPOSE_10,
|
|
.name = "GENERAL 10",
|
|
.priority_high = 0,
|
|
|
|
.param.config = flags_memcpy_config,
|
|
.param.ctrl_lli_chained = flags_memcpy_lli_chained,
|
|
.param.ctrl_lli = flags_memcpy_lli,
|
|
.param.ctrl_lli_last = flags_memcpy_lli_last,
|
|
}
|
|
#endif
|
|
};
|
|
|
|
|
|
static struct coh901318_platform coh901318_platform = {
|
|
.chans_slave = dma_slave_channels,
|
|
.chans_memcpy = dma_memcpy_channels,
|
|
.access_memory_state = coh901318_access_memory_state,
|
|
.chan_conf = chan_config,
|
|
.max_channels = U300_DMA_CHANNELS,
|
|
};
|
|
|
|
static struct resource pinctrl_resources[] = {
|
|
{
|
|
.start = U300_SYSCON_BASE,
|
|
.end = U300_SYSCON_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device wdog_device = {
|
|
.name = "coh901327_wdog",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(wdog_resources),
|
|
.resource = wdog_resources,
|
|
};
|
|
|
|
static struct platform_device i2c0_device = {
|
|
.name = "stu300",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(i2c0_resources),
|
|
.resource = i2c0_resources,
|
|
};
|
|
|
|
static struct platform_device i2c1_device = {
|
|
.name = "stu300",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(i2c1_resources),
|
|
.resource = i2c1_resources,
|
|
};
|
|
|
|
static struct platform_device pinctrl_device = {
|
|
.name = "pinctrl-u300",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(pinctrl_resources),
|
|
.resource = pinctrl_resources,
|
|
};
|
|
|
|
/*
|
|
* The different variants have a few different versions of the
|
|
* GPIO block, with different number of ports.
|
|
*/
|
|
static struct u300_gpio_platform u300_gpio_plat = {
|
|
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
|
|
.variant = U300_GPIO_COH901335,
|
|
.ports = 3,
|
|
#endif
|
|
#ifdef CONFIG_MACH_U300_BS335
|
|
.variant = U300_GPIO_COH901571_3_BS335,
|
|
.ports = 7,
|
|
#endif
|
|
#ifdef CONFIG_MACH_U300_BS365
|
|
.variant = U300_GPIO_COH901571_3_BS365,
|
|
.ports = 5,
|
|
#endif
|
|
.gpio_base = 0,
|
|
.gpio_irq_base = IRQ_U300_GPIO_BASE,
|
|
.pinctrl_device = &pinctrl_device,
|
|
};
|
|
|
|
static struct platform_device gpio_device = {
|
|
.name = "u300-gpio",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(gpio_resources),
|
|
.resource = gpio_resources,
|
|
.dev = {
|
|
.platform_data = &u300_gpio_plat,
|
|
},
|
|
};
|
|
|
|
static struct platform_device keypad_device = {
|
|
.name = "keypad",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(keypad_resources),
|
|
.resource = keypad_resources,
|
|
};
|
|
|
|
static struct platform_device rtc_device = {
|
|
.name = "rtc-coh901331",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(rtc_resources),
|
|
.resource = rtc_resources,
|
|
};
|
|
|
|
static struct mtd_partition u300_partitions[] = {
|
|
{
|
|
.name = "bootrecords",
|
|
.offset = 0,
|
|
.size = SZ_128K,
|
|
},
|
|
{
|
|
.name = "free",
|
|
.offset = SZ_128K,
|
|
.size = 8064 * SZ_1K,
|
|
},
|
|
{
|
|
.name = "platform",
|
|
.offset = 8192 * SZ_1K,
|
|
.size = 253952 * SZ_1K,
|
|
},
|
|
};
|
|
|
|
static struct fsmc_nand_platform_data nand_platform_data = {
|
|
.partitions = u300_partitions,
|
|
.nr_partitions = ARRAY_SIZE(u300_partitions),
|
|
.options = NAND_SKIP_BBTSCAN,
|
|
.width = FSMC_NAND_BW8,
|
|
.ale_off = PLAT_NAND_ALE,
|
|
.cle_off = PLAT_NAND_CLE,
|
|
};
|
|
|
|
static struct platform_device nand_device = {
|
|
.name = "fsmc-nand",
|
|
.id = -1,
|
|
.resource = fsmc_resources,
|
|
.num_resources = ARRAY_SIZE(fsmc_resources),
|
|
.dev = {
|
|
.platform_data = &nand_platform_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device dma_device = {
|
|
.name = "coh901318",
|
|
.id = -1,
|
|
.resource = dma_resource,
|
|
.num_resources = ARRAY_SIZE(dma_resource),
|
|
.dev = {
|
|
.platform_data = &coh901318_platform,
|
|
.coherent_dma_mask = ~0,
|
|
},
|
|
};
|
|
|
|
static unsigned long pin_pullup_conf[] = {
|
|
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
|
|
};
|
|
|
|
static unsigned long pin_highz_conf[] = {
|
|
PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0),
|
|
};
|
|
|
|
/* Pin control settings */
|
|
static struct pinctrl_map __initdata u300_pinmux_map[] = {
|
|
/* anonymous maps for chip power and EMIFs */
|
|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
|
|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
|
|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"),
|
|
/* per-device maps for MMC/SD, SPI and UART */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
|
|
/* This pin is used for clock return rather than GPIO */
|
|
PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11",
|
|
pin_pullup_conf),
|
|
/* This pin is used for card detect */
|
|
PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS",
|
|
pin_highz_conf),
|
|
};
|
|
|
|
struct u300_mux_hog {
|
|
struct device *dev;
|
|
struct pinctrl *p;
|
|
};
|
|
|
|
static struct u300_mux_hog u300_mux_hogs[] = {
|
|
{
|
|
.dev = &uart0_device.dev,
|
|
},
|
|
{
|
|
.dev = &pl022_device.dev,
|
|
},
|
|
{
|
|
.dev = &mmcsd_device.dev,
|
|
},
|
|
};
|
|
|
|
static int __init u300_pinctrl_fetch(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
|
|
struct pinctrl *p;
|
|
|
|
p = pinctrl_get_select_default(u300_mux_hogs[i].dev);
|
|
if (IS_ERR(p)) {
|
|
pr_err("u300: could not get pinmux hog for dev %s\n",
|
|
dev_name(u300_mux_hogs[i].dev));
|
|
continue;
|
|
}
|
|
u300_mux_hogs[i].p = p;
|
|
}
|
|
return 0;
|
|
}
|
|
subsys_initcall(u300_pinctrl_fetch);
|
|
|
|
/*
|
|
* Notice that AMBA devices are initialized before platform devices.
|
|
*
|
|
*/
|
|
static struct platform_device *platform_devs[] __initdata = {
|
|
&dma_device,
|
|
&i2c0_device,
|
|
&i2c1_device,
|
|
&keypad_device,
|
|
&rtc_device,
|
|
&gpio_device,
|
|
&nand_device,
|
|
&wdog_device,
|
|
};
|
|
|
|
/*
|
|
* Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
|
|
* together so some interrupts are connected to the first one and some
|
|
* to the second one.
|
|
*/
|
|
void __init u300_init_irq(void)
|
|
{
|
|
u32 mask[2] = {0, 0};
|
|
struct clk *clk;
|
|
int i;
|
|
|
|
/* initialize clocking early, we want to clock the INTCON */
|
|
u300_clock_init();
|
|
|
|
/* Clock the interrupt controller */
|
|
clk = clk_get_sys("intcon", NULL);
|
|
BUG_ON(IS_ERR(clk));
|
|
clk_enable(clk);
|
|
|
|
for (i = 0; i < U300_VIC_IRQS_END; i++)
|
|
set_bit(i, (unsigned long *) &mask[0]);
|
|
vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
|
|
mask[0], mask[0]);
|
|
vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
|
|
mask[1], mask[1]);
|
|
}
|
|
|
|
|
|
/*
|
|
* U300 platforms peripheral handling
|
|
*/
|
|
struct db_chip {
|
|
u16 chipid;
|
|
const char *name;
|
|
};
|
|
|
|
/*
|
|
* This is a list of the Digital Baseband chips used in the U300 platform.
|
|
*/
|
|
static struct db_chip db_chips[] __initdata = {
|
|
{
|
|
.chipid = 0xb800,
|
|
.name = "DB3000",
|
|
},
|
|
{
|
|
.chipid = 0xc000,
|
|
.name = "DB3100",
|
|
},
|
|
{
|
|
.chipid = 0xc800,
|
|
.name = "DB3150",
|
|
},
|
|
{
|
|
.chipid = 0xd800,
|
|
.name = "DB3200",
|
|
},
|
|
{
|
|
.chipid = 0xe000,
|
|
.name = "DB3250",
|
|
},
|
|
{
|
|
.chipid = 0xe800,
|
|
.name = "DB3210",
|
|
},
|
|
{
|
|
.chipid = 0xf000,
|
|
.name = "DB3350 P1x",
|
|
},
|
|
{
|
|
.chipid = 0xf100,
|
|
.name = "DB3350 P2x",
|
|
},
|
|
{
|
|
.chipid = 0x0000, /* List terminator */
|
|
.name = NULL,
|
|
}
|
|
};
|
|
|
|
static void __init u300_init_check_chip(void)
|
|
{
|
|
|
|
u16 val;
|
|
struct db_chip *chip;
|
|
const char *chipname;
|
|
const char unknown[] = "UNKNOWN";
|
|
|
|
/* Read out and print chip ID */
|
|
val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
|
|
/* This is in funky bigendian order... */
|
|
val = (val & 0xFFU) << 8 | (val >> 8);
|
|
chip = db_chips;
|
|
chipname = unknown;
|
|
|
|
for ( ; chip->chipid; chip++) {
|
|
if (chip->chipid == (val & 0xFF00U)) {
|
|
chipname = chip->name;
|
|
break;
|
|
}
|
|
}
|
|
printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
|
|
"(chip ID 0x%04x)\n", chipname, val);
|
|
|
|
#ifdef CONFIG_MACH_U300_BS330
|
|
if ((val & 0xFF00U) != 0xd800) {
|
|
printk(KERN_ERR "Platform configured for BS330 " \
|
|
"with DB3200 but %s detected, expect problems!",
|
|
chipname);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_MACH_U300_BS335
|
|
if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
|
|
printk(KERN_ERR "Platform configured for BS335 " \
|
|
" with DB3350 but %s detected, expect problems!",
|
|
chipname);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_MACH_U300_BS365
|
|
if ((val & 0xFF00U) != 0xe800) {
|
|
printk(KERN_ERR "Platform configured for BS365 " \
|
|
"with DB3210 but %s detected, expect problems!",
|
|
chipname);
|
|
}
|
|
#endif
|
|
|
|
|
|
}
|
|
|
|
/*
|
|
* Some devices and their resources require reserved physical memory from
|
|
* the end of the available RAM. This function traverses the list of devices
|
|
* and assigns actual addresses to these.
|
|
*/
|
|
static void __init u300_assign_physmem(void)
|
|
{
|
|
unsigned long curr_start = __pa(high_memory);
|
|
int i, j;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
|
|
for (j = 0; j < platform_devs[i]->num_resources; j++) {
|
|
struct resource *const res =
|
|
&platform_devs[i]->resource[j];
|
|
|
|
if (IORESOURCE_MEM == res->flags &&
|
|
0 == res->start) {
|
|
res->start = curr_start;
|
|
res->end += curr_start;
|
|
curr_start += resource_size(res);
|
|
|
|
printk(KERN_INFO "core.c: Mapping RAM " \
|
|
"%#x-%#x to device %s:%s\n",
|
|
res->start, res->end,
|
|
platform_devs[i]->name, res->name);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void __init u300_init_devices(void)
|
|
{
|
|
int i;
|
|
u16 val;
|
|
|
|
/* Check what platform we run and print some status information */
|
|
u300_init_check_chip();
|
|
|
|
/* Set system to run at PLL208, max performance, a known state. */
|
|
val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
|
|
val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
|
|
writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
|
|
/* Wait for the PLL208 to lock if not locked in yet */
|
|
while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
|
|
U300_SYSCON_CSR_PLL208_LOCK_IND));
|
|
/* Initialize SPI device with some board specifics */
|
|
u300_spi_init(&pl022_device);
|
|
|
|
/* Register the AMBA devices in the AMBA bus abstraction layer */
|
|
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
|
|
struct amba_device *d = amba_devs[i];
|
|
amba_device_register(d, &iomem_resource);
|
|
}
|
|
|
|
u300_assign_physmem();
|
|
|
|
/* Initialize pinmuxing */
|
|
pinctrl_register_mappings(u300_pinmux_map,
|
|
ARRAY_SIZE(u300_pinmux_map));
|
|
|
|
/* Register subdevices on the I2C buses */
|
|
u300_i2c_register_board_devices();
|
|
|
|
/* Register the platform devices */
|
|
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
|
|
|
|
/* Register subdevices on the SPI bus */
|
|
u300_spi_register_board_devices();
|
|
|
|
/* Enable SEMI self refresh */
|
|
val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
|
|
U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
|
|
writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
|
|
}
|
|
|
|
/* Forward declare this function from the watchdog */
|
|
void coh901327_watchdog_reset(void);
|
|
|
|
void u300_restart(char mode, const char *cmd)
|
|
{
|
|
switch (mode) {
|
|
case 's':
|
|
case 'h':
|
|
#ifdef CONFIG_COH901327_WATCHDOG
|
|
coh901327_watchdog_reset();
|
|
#endif
|
|
break;
|
|
default:
|
|
/* Do nothing */
|
|
break;
|
|
}
|
|
/* Wait for system do die/reset. */
|
|
while (1);
|
|
}
|